Samsung Galaxy Tab GT-P7510 User manual

GSM TELEPHONE
GT-P7510
1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List _11.05.13
6. Level 1Repair
7. Level 2Repair
8. Level 3Repair_Rev 1.3 / 11.05.13
9. Reference data
Notice: All functionality, features, specifications, and
other product information provided in this document,
including but not limited to, benefits, design, pricing,
components, performance, availability, and capabiliti
-es of the product are subject to change without
notice. Samsung reserves the right to alter this doc
-ument or the product described herein at anytime,
without obligation to provide notification of such
changes.
GSM TELEPHONE CONTENTS

This Service Manual is aproperty of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Samsung Electronics Co.,Ltd.
2011. 05. Rev.1.0
ⓒ

7. Level 2Repair
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Be careful not to scratch cover. Follow the numbered sequence when you disjoint
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
7-1. Disassembly and assembly Instructions
7-1-1. Disassembly
Carefully release the screws
at 2different locations
(Torque 1.1 ± 0.1 kgf.cm) (Size:1.4*2.0)
1Disengage the rear cover with the front
cover by using the hook
2
3Separate the 30 PIN I/F connector, TSP
connector, LCD connector from the PBA.
4
1
2
3
4
30 PIN I/F TSP LCD
◆blue:L2.5
(2Point)
Release the screw at 2points (Size:)(Torque:
1.1±0.1 kgf.cm)

Level 2Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-2
Be careful not to damage the FPCBs Be careful not to scratch cover
Be careful not to damage the wires Be careful not to damage the FPCBs
Open the black thin bar and Separate the
LCD FPCB from the Front.
5Carefully release the screws at 13 different
locations from the Front.
(Torque 1.1 ± 0.1 kgf.cm)
6
Separate the Battery from PBA
7Separate all connector(E/J, 2M, 3M Camera,
Sensor) ribbons from the PBA.
8
◆blue:L2.5 (10Point)
◆red:L2 (3Point)

Level 2Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-3
Be careful not to damage the FPCBs Be careful not to scratch cover
Separate the SPK Module, GPS CABLE,
SIDE KEY from the PBA
9Separate the PBA from Ass'y
10
GPS CABLE
SPK Module(left) SPK Module(right)
SIDE KEY

Level 2Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-4
Be careful not to scratch cover Be careful not to damage the FPCBs
Be careful not to damage the FPCBs Be careful not to damage the wires
7-1-2. assemble
Insert the PBA in the hook
1Attach the SPK Module, GPS CABLE,
SIDE KEY
2
Attach the E/J, 2M, 3M Camera, Sensor.
3Attach the battery
4
GPS CABLE
SPK Module(left) SPK Module(right)
SIDE KEY

Level 2Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-5
Be careful not to scratch cover
screw:1.4*2.0, 1.4*2.5 (Torque 1.1 ± 0.1, '+' type) Be careful not to damage the FPCBs
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
screws at 13 points
6
◆blue:L2.5 (10Point)
◆red:L2 (3Point)
Put the LCD FPCB and Close the black
thin bar
5
7
◆blue:L2.5
screws at 2Points 8Insert the 30 PIN I/F, TSP, LCD Connector
and Close the black thin bar
30 PIN I/F TSP LCD

Level 2Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-6
Follow the order (Torque 1.1 ± 0.1, '+' type)(Size: 1.4*2.0)
Be careful not to scratch rear cover
Joint the Rear and the Front.
9
1
Screws at 2points
Attach screw sheet
10
23

4. Exploded View and Parts List
4-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
4-1. Cellular phone Exploded View

Exploded View and Parts List
Distribution, transmission, or infringement of any content or data from this document without Samsung’
swritten authorization is?
strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
4-1
4-2. Cellular phone Parts list
QCR47
ㅤ
SCREW-MACHINE 6001-001695
QCR72
ㅤ
SCREW-MACHINE 6001-002051
QCR104
ㅤ
SCREW-MACHINE 6001-002686
QCB01
ㅤ
CBF COAXIAL CABLE-30MM (GT-P7500) GH39-01485A
QBA01
ㅤ
INNER BATTERY OPTION GH43-03562A
QJK01
ㅤ
ASSY ETC-EARJACK FPCB (GT-P7500) GH59-11203A
QME16
ㅤ
ASSY ETC-CON TO CON FPCB(GT-P7500) GH59-11210A
QVK05
ㅤ
KEY FPCB-FLASH LED FPCB(GT-P7500) GH59-11211A
QME02
ㅤ
ASSY ETC-SUB PCB(30PIN FPCB+MIC FPCB) GH59-11213A
QVK01
ㅤ
KEY FPCB-POWER+VOL KEY ASSY(GT-P7500) GH59-11217A
QSP01
ㅤ
MODULE-SPEAKER+MOT(LEFT) GH59-11219A
QSP02
ㅤ
MODULE-SPEAKER+INT (RIGHT) GH59-11220A
QME03
ㅤ
TOUCH/PANEL-GT-P7500, LOGO_X (ITO FILM) GH59-11647A
QMI03
ㅤ
RMO RUBBER-MIC HOLDER GH73-15090A
QMP01
ㅤ
A/S ASSY-PBA MAIN(XAB)GT-P7510,64G,SVC GH82-06011A
QCA01
ㅤ
ASSY CAMERA-MODULE GT-P7500,1/5"(3M) GH96-05184A
QCA02
ㅤ
ASSY CAMERA-MODULE GT-P7500,1/5"(2M) GH96-05185A
QFR01
ㅤ
MEA FRONT-LCD ASSY (P4),GT-P7510 GH97-12600A
QSC01
ㅤ
ASSY COVER-SCREW CAP GH98-20396B
QRE01
ㅤ
ASSY CASE-REAR(NORTH AMER_GRAY) GH98-20667C
ㅤ
QVO01 PMO KEY-VOLUME GH72-64107B
ㅤ
QCK02 PMO KEY-POWER GH72-64108B

2. Specification
2-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

3. Operation Instruction and Installation
3-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Main Function
•Android OS: Honeycomb
•3
MP AF with LED Flash
•11.1
WSVGA TFT Full Touch (C-Type)
•A-GPS /BT v2.1 USB v2.0 /WiFi (802.11 a/b/g/n)
•Recording 1080p / Playback 1080p
•Sensors: Accelation, Magnetic, Gyro, Light
•Additional :
-1
GHz Dual Core CPU
-Application store /Voice &Motion UI
-Multi-touch, Multi-task manager

SAMSUNG Proprietary-Contents may change without notice
9. Reference Abbreviate
This Document can not be used without Samsung's authorization
9-1
Reference Abbreviate
―AAC:Advanced Audio Coding.
―AVC :Advanced Video Coding.
―BER :Bit Error Rate
―BPSK:Binary Phase Shift Keying
―CA :Conditional Access
―CDM :Code Division Multiplexing
―C/I :Carrier to Interference
―DMB :Digital Multimedia Broadcasting
―EN :European Standard
―ES :Elementary Stream
―ETSI:European Telecommunications Standards Institute
―MPEG:Moving Picture Experts Group
―PN :Pseudo-random Noise
―PS :Pilot Symbol
―QPSK:Quadrature Phase Shift Keying
―RS :Reed-Solomon
―SI :Service Information
―TDM :Time Division Multiplexing
―TS :Transport Stream

1. Safety Precautions
1-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of
the low margin of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use asoldering iron with apower rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac
ement parts may not function properly.

Safety Precautions
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
1-2
1-2. ESD(Electrostatically Sensitive Devices) Precaution
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha
rge and can be easily damaged by it. We recommend protecting these components with cond
uctive anti-static bags when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are
properly connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.

6. Level 6Repair
6-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6-1. S/W Download
6-1-1. Pre-requisite for S/W Downloading
yDownloader Program (Odin3 v1.83.exe)
yGT-P7510 Mobile Phone
yData Link Cable
yBinary files
-Service Parts
Anyway Jig Adaptor IF Cable RF Cable
GH99-36900B GH99-38251A GH81-09211A GH39-00985A
MEA FRONT-LCD
GH97-12511A
Settings
Data Link Cable

Level 6Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
6-2
6-1-2. S/W Downloader Program
Load the binary download program by executing the
"Odin3 v1.83.exe" ÅRun this file.
1.Option Selection
-Check Re-Partition, Auto Reboot and F. Reset Time, then select PIT File

Level 6Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
6-3
2.Enter Device into Download Mode
-Press down on Volume Down button and power key at same time for 10 seconds
-Press down on Volume Up button to enter device into download mode
Volume Down Button
Power key
Volume Up Button

Level 6Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
6-4
3.Connect the Device to PC via Data Cable.
Make sure ID:COM box highlighted yellow that the device is connected to the PC.
4.Start Downloading PIT file by clicking Start Button. Then wait for "Pass" to be
appear on the screen.

Level 6Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
6-5
5. Click on Reset button, then unselect Re-Partition box. Then select PDA and CSC Files.
6. Remove the battery, then enter Device into Download Mode again as in step #2.
then connect to the PC.
7.Start Downloading PDA and CSC files by clicking Start Button. Then wait for
"Pass" to be appear on the screen.
8.Once the device boots up, confirm the downloaded version name and etc. :
*#1234#
Full Reset :
*2767*3855#