Samsung CS29Z47 User manual

Owner’s
Instructions
COLOR TELEVISION
CS29Z47
CS29Z50
CS29Z57
CS29Z58
CS29A730
AA68-03964D-00Eng_0423.indd1 2008-06-05오후5:34:35

English - 1
➢ The actual configuration of your TV may be different,
depending on your model.
Connection Panel (depending on the model)
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Output
The RCA2and RCA3connectors are used for equipment,
such as a recording VCR or audio system.
Connecting to the SCART Input
The RCA2and RCA3connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player.
☛
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to the RCA Input
The 3(AUDIO-L/R) and 2(VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting to the S-Video Input
The 1(S-Video input) and 2(Video input) connectors
are used for equipment with an S-Video output, such as a
camcorder or VCR.
➢ When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
COLOUR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
➢ The product colour and shape may vary depending on
the model.
Control Panel (depending on the model)
You can use the 3buttons to switch the TV on when it is
in standby mode depending on the model.
The 2and 3buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1On-screen menu display
2Volume adjustment
3Channel selection
4Remote control sensor
5Standby indicator
6Power on/off
cable
television
network
Rear Panel
or
S-Video input
Video input
Front (or Side) Panel
Audio input
COLOR TELEVISION
AA68-03964D-00Eng_0423.indd1 2008-06-05오후5:34:36

English - 2
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the “I” button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel
- Manual Store” on page 4.
➢If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4 To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
☛Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
1POWER
Used to switch the TV on
and off.
2Numeric buttons
Used to select channels
directly.
3-/--
Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is displayed.
Enter the two-digit chan-
nel number.
Remote Control (depending on the model)
➢Operation of remote control may be affected by bright
artificial light near to the TV.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “–” ends of the batteries are
inserted correctly or the batteries are
drained.
➢Do not mix battery types, i.e. alkaline and manganese.
4CH LIST
5TV
Used to return to the
TV mode when it is in
external input mode.
6
2
1
/
Used to increase or
decrease the volume.
7MENU
Used to display the on-
screen menu or return to
the previous menu.
8▲/▼/◄/►
Used to control the cur-
sor in the menu.
9INFO
Used to view the channel
information and setting
status you selected.
0PIP
!S.MODE
Used to select the sound
effect.
@P.MODE
Used to select the pic-
ture effect.
#SOURCE
$DUAL
%SWAP
^TURBO
Used to select the turbo
sound option.
&SOURCE
Used to display all of the
available video sources.
* PRE-CH
Used to switch repeat-
edly between the last
two channels displayed.
(EZ.VIEW
Used to display Chan-
nel Grouping, Channel
Minimizer, Channel
Schedule, Music Mode,
Half Mute menu.
)SRS
a P
/
Used to display the next
or previous stored
channel.
b EXIT
Used to exit from any
display or return to
normal viewing.
c MUTE
Used to switch the sound
off temporarily. To turn
the sound back on, press
the MUTE, , or
button.
d STILL
e P.SIZE
f P
/
Used to display the next
or previous stored
channel.
g SIZE
h POSITION
TV
PIP INFO TTX/MIX
SRS
P.SIZESTILLP.MODE S.MODE
SIZESOURCE SWAP
PTURBO POSITION
DUAL
CH LIST EZ.VIEW
21
22
23
24
25
26
27
28
AA68-03964D-00Eng_0423.indd2 2008-06-05오후5:34:37

English - 3
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Input (depending on the model)-
Source List
3Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
4Press the ▲or ▼button to
select your area. Press the
ENTER button.
5To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6Press the ◄or ►button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲or ▼button.
7When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated .
Re-setting the Plug & Play
Method:
MENU  ▲/▼ (Setup) 
ENTER  ▲/▼ (Plug & Play)
ENTER
Viewing the Menus
1Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2Press the ▲or ▼button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3Press the ▲or ▼button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4Press the ◄/►/▲/▼ button to change the selected
items. Press the MENU button to return to the previous
menu.
5Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play is
displayed. To start Plug
& Play, press the ENTER
button. The Language menu
is displayed.
➢The Language menu will automatically appear after
several seconds, even if the ENTER button is not
pressed.
2Select the appropriated
language by pressing the
▲or ▼button. Press the
ENTER button.
The Check antenna input. is
displayed.
➢If any language is not selected, the language menu
will disappear about 30 seconds later.
continued...
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored in the order which reflects
their position in the frequency
range (with lowest first and
highest last). The programme
originally selected is then
displayed.
➢To stop the search before
it has finished, press the
ENTER button.
When finished, the "Sort"
menu is displayed. To sort
the stored channels into
the desired numerical order, refer to “Channel - Sort”. To
exit without sorting, press the EXIT button .
Channel - Auto Store
OK
Enjoy your watching
Plug & Play ►
Language : English ►
Time ►
Blue Screen : Off ►
Melody : Medium ►
Film Mode : Off ►
Music Mode : Off ►
▼ More
SetupT V
Enter
Move Exit
Source List : TV ►
Edit Name ►
InputT V
Enter
Move Exit
Area :
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
▼ More
ChannelT V
Enter
Move Return
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
▼
P 1 C-- 40 MHz
Start
Auto Store
0 %
Enter Return
Plug & Play
Enter
Move Skip
Area
Asia/W.Europe .
CIS/E.Europe
China
Hong Kong/UK
▼
Plug & Play
Enter Skip
P 1 C-- 40MHz
0 %
Start
Plug & Play
Adjust
Move Enter
Clock Set
Hour Minute
▲
- -
▼
- -:
Plug & Play
Enter
Move
Language English
Pусcкий
Skip
Start Plug & Play.
OK
Plug & Play
Enter Return
Check antenna input.
OK
Plug & Play
Enter Skip
AA68-03964D-00Eng_0423.indd3 2008-06-05오후5:34:38

English - 4
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Method:
▲/▼ : Used to select a
Programme.
◄/► : Used to select the
desired channel group.
▲/▼ ➜ENTER : Used to
confirm the new choice.
Channel - Channel Grouping
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆From: Channel number to
be changed.
◆To: New channel number to be identified.
◆Store: Confirmation the exchange of channel numbers.
Channel - Sort
Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each of
the channels found
- The programme number of each stored channel which you
wish to identify
◆Programme (Programme number to be assigned to a
channel)
◆Colour System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆Sound System: BG/DK/I/M
◆Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆Store (When you store the channel and associated
programme number)
➢ If there is no sound or abnormal sound, re-select the
sound standard required.
continued...
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
◄/► : You can obtain a sharp
and clear picture and good
sound quality.
▲/▼ ➜ENTER : You can reset
the setting.
MENU : You can memorise adjusted picture or sound.
Channel - Fine Tune
☛Channel mode
◆P(Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned
to position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
◆C(Real channel mode): You can select a channel by
entering the assigned number for each air broadcasting
station in this mode.
◆S(Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in
this mode.
When a weak broadcast signal
causes an unclear, noisy picture,
the “LNA” feature improves
the picture quality by setting to
“On”. If you experience noise
on a certain noise on a certain
channel, set the the “LNA” to
“On” or “Off” for this channel, to obtain the optimum picture.
Method:
ENTER : On/Off
Channel - LNA
Prog. Ch. Name
0 C-- -----
1 C65 -----
►
2 C27 -----
3 C04 -----
4 C07 -----
5 C10 -----
SortT V
Enter
Move Return
Programme : P 1
Colour System : Auto
►
Sound System : OK ►
Channel : C 5
Search : 175 MHz
Store : ?
Manual StoreT V
Enter
Move Return Fine Tune
P 3
0
Adjust
Reset
Save Return
Group Select : News ►
Set Channel Group ►
Channel GroupingT V
Enter
Move Return
▲ More
LNA : On
►
Channel Grouping ►
ChannelT V
Enter
Move Return
T V Set Channel Group
Move Return
Prog. MOVIE MUSIC NEWS SPORT USER
0 C - -
1 C05
2 C21
3 C04
4 C07
5 C10
6 C11
7 C13
Enter
▲
▼
T V
AA68-03964D-00Eng_0423.indd4 2008-06-05오후5:34:39

English - 5
◆Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select
the language which will be
used for displaying menus
and indications.
◆Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
◆Melody
You can hear melody sound when the television is
powered on or off.
◆Music Mode
You can listen to the music/audio with no video or visual
distraction.
➢When Music Mode is selected, only music is audible
and no picture is visible.
Method:
ENTER : On/Off
Setup -
Language / Blue Screen /
Melody / Music Mode
This feature allows you to prevent
unauthorized users, such as children,
from watching unsuitable programmes by
muting out video and audio. Child Lock
cannot be released using front (or side)
panel buttons. Only remote control can
release the Child Lock setting, so keep
the remote control away from children.
◆Child Lock: On/Off
If you want to unlock a channel, set
to Off.
◆Programme: Channel number to be
locked.
◆Lock: When press the ENTER button, the Locked is
displayed.
➢If any channel is locked, you can not access to the
Channel and Child Lock menu by using the control
buttons on the TV panel (the Not available is displayed
in the Child Lock menu). You can access by using the
remote control only.
Channel - Child Lock
◆Clock
You can set the television
clock so that the current
time is displayed when
pressing the INFO button
on the remote control.
You must also set the
time if you wish to use the
automatic on or off timers.
◆  Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
◆  Scheduler
You can set the scheduler
to make the TV return to a
particular channel at a pre-
set time.
➢Upto 5 Programmes can
be scheduled at a time.
➢If the Clock is not set in
the Time menu, a pop-
up warning will flash if user tries to enter Scheduler.
◆  On Timer Volume
Ther preferred volume can be set for when the timer
automatically turns on the TV.
Method:
◄/► : Move to the programme hour or minute.
▲/▼ : Used to set programme hour or minute.
▲/▼ ➜ENTER : Set option of YES/ON to activate/deactive
the operation.
☛
Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating, which may
occur if a TV is on for too long.
continued...
Setup - Time
Plug & Play ►
Language : English ►
Time ►
Blue Screen : Off ►
Melody : Medium ►
Film Mode : Off ►
Music Mode : Off ►
▼ More
SetupT V
Enter
Move Exit
Clock Set : - - : - - ►
Sleep Timer : Off ►
Scheduler ►
TimeT V
Enter
Move Return
P On Time Off Time Set
1. -- -- : -- -- : -- No
2. -- -- : -- -- : -- No
3. -- -- : -- -- : -- No
4. -- -- : -- -- : -- No
5. -- -- : -- -- : -- No
On Timer Volume : 10
SchedulerT V
Enter
Move Return
Channel List
Язык
:
Enter
Move
Return
Page
P 5 C 76
1 / 17
Prog.
0 C--
1 C57
2 C10
3 C08
4 C32
5 C25
▲
▼
Add Lock
AA68-03964D-00Eng_0423.indd5 2008-06-05오후5:34:40

English - 6
You can display a sub picture within the main picture of TV
programme or external A/V devices such as VCR or DVD. In
this way you can watch TV program or monitor the video
input from any connected devices while watching TV or other
video input.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
Press the ▲ or ▼ button to select "PIP", then press the
ENTER button.
Press the ENTER button again.
Press the ▲ or ▼ button to select "On", then press the
ENTER button.
Press the ▲ or ▼ button to select "Source", then press
the ENTER button. Select a source of the sub picture by
pressing the ▲ or ▼ button and press the ENTER button.
➢The sub picture can serve different source selections
based on what the main picture is set to.
Press the ▲ or ▼ button to select "Size" of the sub picture
and then press the ENTER button. Select a size of the sub
picture by pressing the ▲ or ▼ button and then press the
ENTER button.
➢If main picture is in "Component" mode, "Size" is not
available.
Setup - PIP
Easy view is a combination of
Video&Audio features that make
TV viewing much easier.
Channel minimizer is a feature
that offers freedom in the
number of channels that you
can watch at any time!
To add a Channel.
You can go to your favorite
channel you wish to add to
Channel Minimizer.
Method:
▼: Add the present channel to
Channel Minimizer.
➢
Repeat the process to add upto six channels.
To delete a Channel
You can delete the channel in Channel Minimizer by pressing
▲ button.
You can display Channel Minimizer menu by pressing
◄/►/▲ button.
➢ 
Channel Minimizer is always activated hence you don’t
need to press Easy view button.
Easy View - Channel Minimizer
Easy functions of the remote control.
You can freeze the sub-picture.
◆Microphone Level / Echo
Level
You may adjust microphone
and echo volume on the TV.
You may easily increase or
decrease microphone and
echo volume level using
and buttons on the remote control.
◆Reset
When selecting Reset
option microphone and echo
volume level will return to
the initial value.
Setup - Karaoke (depends on model)
▲More
PIP
►
Karaoke Mode ►
SetupT V
Enter
Move Return
Karaoke Mode : On ►
Microphone Level : 6 ►
Echo Level : 6 ►
Reset : OK ►
SetupT V
Enter
Move Return
▲More
PIP
►
Karaoke Mode ►
SetupT V
Enter
Move Exit
PIP : On ►
Source : TV ►
Position : ►
Programme : P 1 ►
PIPT V
Enter
Move Return
Scroll Select ▲Add ▼Delete
Scroll Select ▲Add ▼Delete
P14 P20 P35
TV CH LIST SRS
PIP INFO TTX/MIX
P.SIZESTILLP.MODE S.MODE
SIZESOURCE SWAP
PTURBO POSITION
DUAL
EasyView
Enter
Move Exit
Channel Grouping ►
Channel Minimizer ►
Channel Scheduler ►
Music Mode ►
Half Mute ►
AA68-03964D-00Eng_0423.indd6 2008-06-05오후5:34:41

English - 7
Sound -
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Sound / Half Mute
◆Mode: Standard/Music
/Movie/Speech/Custom
You can select the type
of special sound effect to
be used when watching a
given broadcast.
➢
You can select these
options simply by pressing the S.MODE button on the
remote control.
◆Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
◆Auto Volume
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
◆Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
◆Half Mute
You can reduce volume to half and control volume even
in the mute mode.
Method:
ENTER : On/Off
The DUAL I-II button displays/
controls the processing and
output of the audio signal. When
power is switched on, the mode
is automatically preset to either
“Dual-I ” or “Stereo”, depending on the current transmission.
Selecting the Sound Mode
(depending on the model)
➢
◆If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
◆NICAM Stereo
Type of broadcast
Mono
(Normal use)
Dual-I
NICAM
Dual-II
NICAM
Mono
(Normal)
↔ ↔
Regular +
NICAM Mono
Regular broadcast
(Standard audio)
NICAM Dual-I/II
On-screen indication
Mono
NICAM Mono
(Normal)
↔
NICAM Stereo Stereo
NICAM Mono
(Normal)
↔
◆A2 Stereo
Type of broadcast
Mono
(Normal)
Bilingual or Dual-I/II
Regular broadcast
(Standard audio)
On-screen indication
Dual-I ↔ Dual-II
Stereo Stereo Mono
(Forced mono)
↔
◆Mode: Dynamic/ Standard/
Movie/Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
◆You can select these options
simply by pressing the
P.MODE button on the remote control.
◆Contrast/Brightness/Sharpness/Colour/Tint(NTSC
only)
The television has several settings which allow you to
control the picture quality.
◆Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
➢Warm1,Warm2 can be selected only when the TV is
in the Movie mode.
◆Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard or Movie.).
Picture - Mode
Picture - Digital NR
◆Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
◆Tilt
If you find that the picture received is slightly titled to one
side, you can adjust the title setting(-7 to +7).
◆Size
You can select a picture size among Normal/Zoom/Wide.
Mode : Standard ►
Equalizer ►
SRS TS XT : Off ►
Auto Volume : Off ►
Turbo Sound : Off ►
Pseudo Stereo : Off ►
Half Mute : Off ►
SoundT V
Enter
Move Exit
Mode : Dynamic ►
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
►
▼ More
PictureT V
Enter
Move Return
▲ More
Size : Normal
►
Digital NR : Off ►
Tilt : 0
Reset : OK
►
PictureT V
Enter
Move Return
P.SIZESTILLP.MODE S.MODE
SIZESOURCE
PTURBO POSITION
DUAL
AA68-03964D-00Eng_0423.indd7 2008-06-05오후5:34:42
SWAP

English - 8
1
2
1
(index)
Used to display the index (contents) page at any time
while you are viewing teletext.
2
2
1
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow
on automatically. To resume, press it again.
3
2
1
(reveal)
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
4
2
1
(size)
Press to display the double-size letters in the upper half
of the screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
5
2
1
(store)
Used to store the teletext pages.
6
2
1
(mode)
Press to select the teletext mode (LIST/FLOF). If you
press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page
into list using the
2
1
(store) button.
7
2
1
(sub-page)
Used to display the available sub-page.
8
2
1
(page up)
Used to display the next teletext page.
9
2
1
(page down)
Used to display the previous teletext page.
0
2
1
(cancel)
Used to display the broadcast when searching for a page.
!
2
1
(teletext on/mix)
Press to activate teletext mode after selecting the
channel providing the teletext service. Press it again to
overlap the teletext with the current broadcasting screen.
@ Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are colour-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding
to the required. The page is displayed with other
coloured information that can be selected in the same
way. To display the previous or next page, press the
corresponding coloured button.
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
☛For teletext information to be displayed correctly,
channel reception must be stable. Otherwise,
information may be missing or some pages may not be
displayed.
Teletext Feature (depending on the model)
TV
PIP INFO TTX/MIX
SRS
P.SIZESTILLP.MODE S.MODE
SIZESOURCE SWAP
PTURBO POSITION
DUAL
CH LIST EZ.VIEW
AA68-03964D-00Eng_0423.indd8 2008-06-05오후5:34:43

English - 9
OSD Map

✽
: It is variable depending on the model.
Picture - Mode - Dynamic / Standard / Movie
- Contrast
- Brightness
- Sharpness
- Colour
- Tint (NTSC only)
- Colour Tone - Cool2 / Cool1 / Normal / Warm1 / Warm2
- Size - Normal/Zoom/Wide
- Digital NR - Off/Low/Medium/High/Auto
- Tilt
- Reset - OK / Cancel
Sound - Mode - Standard / Music / Movie / Speech / Custom
- Equalizer
- SRS TS XT
- Auto Volume - Off / On
- Turbo Sound - Off / On
- Pseudo Stereo - Off / On
- Half Mute - Off / On
Channel- - Area - Asia / W.Europe / CIS / E.Europe / China / Hong Kong / UK / Austraila / NZL /
Indonesia / South Africa / America
- Auto Store
- Manual Store - Programme
- Colour System ✽- Auto / PAL / SECAM / NTSC4.43 / NTSC3.58
- Sound System ✽- BG / DK / I / M
- Channel
- Search
- Store
- Channel Manager - Channel List
- Child Lock - Off/On
- Sort
- Name
- Fine Tune
- LNA - Off/On
- Channel Grouping - Group Select
- Set Channel Group
Setup - Plug & Play
- Language ✽
- Time - Clock Set
- Sleep Timer
- Scheduler
- Blue Screen - Off / On
- Melody - Off/Low/Medium/High
- Film Mode - Off/Auto
- Music Mode - Off / On
- PIP ✽
- Karaoke Mode ✽- Karaoke Mode
- MIC Level
- Echo Level
- Reset
Input - Source List ✽
- Edit Name 
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall
socket.
Check that you have pressed the “I” button (On/Off) and
the POWER button.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
Check the volume.
Check whether the volume MUTE button on the remote
control has been pressed.
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the
television, then move it further away.
Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission
window).
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Check that the batteries are drained.
Troubleshooting
AA68-03964D-00Eng_0423.indd9 2008-06-05오후5:34:43

English - 10
Standard screen format televisions (4:3, the aspect ratio of
the screen width to height) are primarily designed to view
standard format full-motion video.
The images displayed on them should primarily be in the
standard 4:3 ratio format and constantly moving. Displaying
stationary graphics and images on screen, such as the
dark top and bottom letterbox bars (wide screen pictures),
should be limited to no more than 15% of the total television
viewing per week.
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers
this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-
bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such
as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying
any stationary images that exceed the above guidelines
can cause uneven aging of picture tubes (CRTs) that
leave subtle, but permanent burned-in ghost images in the
television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images,
not stationary patterns or dark bars.
On television models that offer picture sizing features, use
these controls to view the different formats as a full screen
picture.
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
Important Warranty Information
Regarding Television Format Viewing
Model CS29Z58HYQ CS29Z57HYQ CS29A730EY CS-29Z47HAQ CS-29Z50HKQ
Screen aspect ratio 4:3 4:3 4:3 4:3 4:3
Screen size, inches 29 29 29 29 29
Full screen diagonal size
(cm)
72 72 72 72 72
Usable screen area
diagonal size (cm)
68 68 68 68 68
Supported color modes PAL/SECAM(NT3.58,NT4.43)
Supported audio modes B/G,DK,I,M
Dimensions (mm)
H 600 600 600 604 600
W 749 765 784 773 765
D 411 420 409 419 416.5
Weight (kg) 39.4 39.4 38.8 39.7 41.4
Mono/Stereo STEREO STEREO STEREO STEREO STEREO
Integrated speaker power 10 W X 2 10 W X 2 10 W X 2 10 W X 2 10 W X 2
Power consumption, W 150 150 150 150 150
SCART available available available available available
S-VIDEO / RCA (input) available available available available available
RCA (output) no no no no no
Earphone / headphone no no no no no
Microphone jack no no no no no
Component (Y/PB/PR) available available available available available
Optional accessories
Remote control available available available available available
Batteries available available available available available
Adapter for internal
antenna
no no no no no
User Manual available available available available available
➢
For the power supply and Power Consumption, refer to the label
attached to the product.
➢
Should be used for its intended purpose under normal conditions.
Life time:7 years
Specifications
AA68-03964D-00Eng_0423.indd10 2008-06-05오후5:34:44

AA68-03964D-01
AA68-03964D-00Eng_0423.indd11 2008-06-05오후5:34:44