Samsung RM40D Parts list manual

Setup Samsung RM40D Signage TV
How to setup Samsung Signage TV –RM40D to auto play video from USB flash drive
Rev. 02

2

3
Initial display setup
Only needed if the display is unused.
Skip to Page 11 if you already did this or the display starts up normally.
Upon first boot the TV needs a one-time setup.
Go through the setup screen and choose the highlighted settings.
Use the arrow keys to navigate the menus and the enter key in the middle to select an option.

4
If the display does not turn itself ON press the ON/OFF on the remote to turn the display ON again and
continue the setup.

5
Press Ok on the remote to change the channel source and select No TV (Signage Only)

6

7
Skip WI-FI setup
The TV automatically scans for nearby WIFI networks and may find some, but skip the setup by choosing
the arrow to right.

8
.

9
Initial/First startup setup done

10
After the initial setup, we need to import a preconfigured setup from the provided USB key.
If a USB key was not delivered with a USB key or you have lost it, you can email a request for a new setup file to
[e-mail]
Subject: New setup file.
Extract the content of the ZIP file to the USB key so all folders and files a located at the root of a USB key.
Insert the USB key, with the config files, in the USB slot located on right side of the TV.
With the TV turned ON press the MENU key on the remote.
Scroll down with the arrow keys and choose System.