Samsung SP-43H3HT Instruction manual

English - 1
Connecting to the External Input/Outputs
➢ EXT1 is used for the equipment with an RGB output, such as video game devices or video disc players.
Rear of the TV
VCR
Decoder /
Video game device
Video disc player
Satellite receiver
① This end can be fitted with:
◆A SCART connector
◆An S-Video connector and two audio RCA connectors (L+R); EXT 2
◆Three RCA connectors (VIDEO + AUDIO-L and R)
② If you have a second VCR and wish to copy cassette tape, connect the
source VCR to EXT1 and the target VCR to EXT2 so that you can redirect
the signal from EXT1 to EXT2.
③ If you have a decoder, connect the decoder to the VCR and the VCR to
the television.
➃ When you wish to record a programme, connect the receiver to EXT1 and
the VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2.
or
or
①
DVD
②
➃
③
☛Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 71

English -2
Connecting to the RCA Input
➢The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders,
video disc players, and some video game devices.
Side of the TV
Camcorder
Video game device
Video disc player
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 72

English - 3
Connecting to the S-Video Input
➢The S-VIDEO INPUT and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video
output, such as a camcorder or VCR.
Camcorder
VCR
① To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used.
and
①
Side of the TV
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 73

English - 4
Connecting to the Digital Audio Input
➢The DIGITAL AUDIO IN (OPTICAL IN and COAXIAL IN) connectors are used for equipment with a
digital output (to take digital sound).
Rear of the TV
DVD
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 74

English - 5
Connecting to the Component Input
➢The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
(480i, 480p, 576i,576p, 1080i)
DVD
Rear of the TV
DTV receiver
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 75

English - 6
Connecting Additional Speakers
①
①
The SURROUND SPEAKER OUT connectors are used for sound output to external speakers.
- The factory default of SURROUND SPEAKER OUT SELETION is set to INT.
For sound output to external speakers, set to EXT. Sound to the internal speaker is off.
➢To improve the sound quality, connect the:
◆Red wire to the red terminal
◆Black wire to the black terminal
➢Speakers can be purchased separately.
BP68-00341A (J61A_Euro_ENG) 4/19/04 8:30 PM Page 76