Samsung SP-43T6 User manual

COLOUR
TELEVISION
SP43T6/48T6/54T6/62T6
SP47W3/55W3/65W3
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ENG
REMOTE CONTROL
ON-SCREEN MENUS
PERFECT FOCUS
PICTURE IN PICTURE
TELETEXT (depending on the model)
ELECT

2
ENG
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily e in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and ottom letter ox ars (wide screen
pictures), should e limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily e in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side- ars on non-expanded standard format television video and
programming, should e limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, we sites or computer graphics and patterns, should e limited as
descri ed a ove for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dar bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other urned-in images, is not covered y
your Samsung limited warranty.

3
ENG
Safety Instructions
◆Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆Do not expose the television to direct sunlight and other sources of heat.
◆Do not expose the television to any liquids.
◆Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆Do not step on or twist the power cord.
◆Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆If the remote control is not used for a long period of time, remove the batteries and store it in a cool,
dry place.
◆Do not drop the remote control.
☛
This device is not for use in industrial environments.
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash and arrow head
within the triangle is a warning
sign alerting you of “dangerous
voltage” inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛The main voltage is indicated on the
rear of the TV set and the frequency is
50 or 60Hz.
!

4
ENG
Contents (continued)
◆PREPARING YOUR TELEVISION
■Safety Instructions ......................................................................................... 3
■Caution .......................................................................................................... 3
■Front Control Panels...................................................................................... 6
■Front or Side Connection Panels................................................................... 7
■Rear Connection Panel ................................................................................. 8
■Infrared Remote Control ................................................................................ 9
■Inserting the Batteries in the Remote Control................................................ 10
■Connecting the Aerial (or Cable Television Network).................................... 11
■Switching Your Television On and Off........................................................... 12
■Placing Your Television in Standby mode..................................................... 12
■Plug & Play Feature....................................................................................... 13
■Adjusting Basic Convergence........................................................................ 14
■Using the Perfect Focus Feature................................................................... 15
■Choosing Your Language.............................................................................. 16
◆SETTING UP THE CHANNELS
■Storing the Channels Automatically............................................................... 17
■Storing the Channels Manually...................................................................... 18
■Skipping Unwanted Channels ....................................................................... 19
■Fine tuning Channel Reception ..................................................................... 20
■Sorting the Stored Channels ......................................................................... 21
◆USING THE TELEVISION (continued)
■Changing the Picture Standard ..................................................................... 22
■Selecting the Picture Format ......................................................................... 22
■Adjusting the Picture Settings........................................................................ 23
■Activation/Deactivation the Digital Noise Reduction Feature ........................ 24
■Setting the Blue Screen Mode....................................................................... 24
■Using the Natural Scan Feature .................................................................... 25
■Using the LNA (Low Noise Amplifier) Feature............................................... 25
■Adjusting the Volume..................................................................................... 26
■Changing the Sound Standard ...................................................................... 26
■Adjusting the Sound Settings ........................................................................ 27
■Extra Sound Settings (Auto volume/Melody)................................................. 28
■Setting the Dolby ProLogic............................................................................ 29
■Selecting the Sound Mode (depending on the model) .................................. 30
■Switching the Sound Off Temporarily ............................................................ 30

5
ENG
Contents
◆USING THE TELEVISION
■Setting the Sleep Timer ................................................................................. 31
■Setting and Displaying the Current Time....................................................... 31
■Switching the Television On and Off Automatically ....................................... 32
■Setting up your Remote Control .................................................................... 33
■Picture In Picture ........................................................................................... 34
◆USING THE TELETEXT FEATURE (depending on the model)
■Teletext Feature ............................................................................................ 36
■Displaying the Teletext Screen...................................................................... 37
■Selecting Display Options.............................................................................. 38
■Selecting a Teletext Page.............................................................................. 39
◆INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■Setting up your PC (depending on the model) .............................................. 40
■Changing the Screen Size or Position of your PC......................................... 41
■Connecting to the PC Input ........................................................................... 41
■Connecting to the AV Input/Outputs.............................................................. 42
■Connecting to the AV Input............................................................................ 42
■Connecting to the DVD Input......................................................................... 43
■Connecting to the S-Video Input.................................................................... 43
■Connecting to the Audio Output .................................................................... 44
■Viewing Picture From External Sources ........................................................ 44
■Automatic Degaussing to Remove Colour Patches....................................... 45
■Trouble Shooting: Before Contacting Service Personnel .............................. 45
☛➢
Symbols
Press Important Note

6
ENG
Front Control Panels
➣The actual configuration on your TV may be different, depending on
your model.
a) Source Selection
b) Menu Display
c) Previous Channel Selection
d) Next Channel Selection
e) Volume Decrease
f) Volume Increase
g) Temporary Sound Switch-Off
h) Remote Control Sensor
i) Power
j) Stand by & Timer Indicator

7
ENG
Front or Side Connection Panels
➣The actual configuration on your TV may be different, depending on
your model.
a
a) Perfect Focus
b) Video Input
c) Audio Inputs (L, R)
d) S-Video Input
e) PC Input

8
ENG
Rear Connection Panel
☛The actual configuration on your TV may be different, depending on
the model.
a) 75ΩCoaxial connector for
Aerial/Cable network
b) Audio/Video Input/Output
c) S-Video Input
d) Video Inputs
e) Audio Inputs
f) Audio/Video Monitor Outputs
g) DVD Video Inputs
h) DVD Audio Inputs
i, j, k) Audio Outputs
(Dolby Pro logic)
R L
Option
Option

9
ENG
Infrared Remote Control
➣Buttons and markings are subject to change.
Power
NEXT CHANNEL/
TELETEXT NEXT PAGE
PERFECT FOCUS
VCR/DVD FUNCTIONS;
(STOP/REWIND/PLAY/PAUSE/
FAST-FORWARD)
TELEVISION STANDBY BUTTON
NUMERIC BUTTONS
EXTERNAL INPUT SELECTION
VOLUME DECREASE
TELETEXT SUB-PAGE
ON-SCREEN DISPLAY/
TELETEXT REVEAL
TELETEXT DISPLAY/MIX
DOLBY PRO LOGIC MENU DISPLAY
FASTEXT TOPIC SELECTION
SOUND EFFECT SELECTION PICTURE EFFECT SELECTION
TEMPORARY SOUND SWITCH OFF
SOUND MODE SELECTION/
TELETEXT CANCEL
PICTURE SIZE/TELETEXT SIZE
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
VOLUME INCREASE
CONTROL THE CURSOR IN THE MENU
MENU DISPLAY/
PROGRAMME SELECTION BY NAME
TUNER/CABLE NETWORK SELECTION
MAKE THE REMOTE CONTROL WORKS
FOR TV, PC (OPTION), CABLE,
DVD PLAYER
AV-LINK VCR RECORD (OPTION)
AV-LINK VCR STOP (OPTION)
ONE/TWO-DIGIT CHANNEL SELECTION
➢The performance of the remote control may be affected by bright light.
PIP FUNCTIONS;
PIP ON/SWAP/LOCATE/
SOURCE SELECTION (TV/VIDEO)/
SCAN/CHANNEL SELECTION (P▲/▼)
CHANGE CONFIRMATION
AUTOMATIC SWITCH-OFF
INFORMATION DISPLAY
(MEGA-TELETEXT OPTION)
PC DISPLAY CONTROL
(CHANGE THE POSITION OR
SIZE OF SCREEN)
REMOTE CONTROL SETUP

10
ENG
You must insert or replace the batteries in the remote control when
you :
◆Purchase the television.
◆Find that the remote control is no longer operating
correctly.
1Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2Insert batteries, taking care to respect the polarities:
◆+on the battery with +on the remote control
◆ - on the battery with - on the remote control
3Replace the cover by pushing it in the direction of the arrow.
PRESS
Inserting the Batteries in the Remote Control

11
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
Plug the aerial or cable network input cable to the 75Ωcoaxial socket
on the rear of the television.
Connecting the Aerial (or Cable Television Network)
Cable
Television
Network
Rear of TV

12
ENG
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2Press the “ I “(ON/OFF) button on the front of the television.
Result: The Standby indicator lights up on the front panel.
3Press the POWER button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
4To switch your television off, press the “I “(ON/OFF) button again
on the front of the television.
Switching Your Television On and Off
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆Power consumption
◆Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1Press the POWER button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up.
2To switch the screen back on, simply press the POWER button
again on the remote control.
➣Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.

13
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER button
on the remote control.
Result: The message PLUG & PLAY is displayed. It flickers for a
little while and then the LANGUAGE menu is automatically
displayed.
2Move the joystick up or down to select required language. Press
the MENU button to enter the language, and then the message
ANT. INPUT : CHECK is displayed.
➣If any language is not selected on the LANGUAGE menu, the
LANGUAGE menu will be displayed about 30 seconds later.
3Make sure that the antenna is connected to the TV. And move the
joystick left or right.
Result: The AUTO STORE menu is displayed.
4Select your area by moving the joystick left or right. The following
areas are available: ASIA/W.EUROPE - CIS/E.EUROPE - CHINA -
HONGKONG/UK - AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA -
AMERICA.
5To search the channels, select the SEARCH by moving the joystick
up or down, and then move the joystick left or right (refer to
“Storing the Channels Automatically”on page 17). Press the
MENU button to skip.
Result: The TIME menu is displayed.
6Move the joystick left or right to move to the hour or minute. Set the
hour or minute by moving the joystick up or down (refer to “Setting
and Displaying the Current Time”on page 31).
7When you have finished, press the MENU button.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
PLUG & PLAY
ANT. INPUT : CHECK
SELECT EXIT
AUTO STORE
AREA : ASIA/W.EUROPE
SEARCH : -/+
SELECT ADJUST EXIT
TIME
CLOCK : -- : -- AM
TIMER : OFF
SELECT ADJUST EXIT
ENJOY YOUR WATCHING

14
ENG
If the color appears spread out or “smeared” on the screen, the
convergence probably needs alignment. Be sure to use the remote
control for the convergence adjustments. (The Convergence
Adjustment can not be made by using the control buttons on the
front panel.)
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the FUNCTION is selected and
press the joystick ( ) button.
Result: The FUNCTION menu is displayed.
3Move the joystick up or down until the CONVERGENCE is selected
and press the joystick ( ) button.
Result: The CONVERGENCE menu is displayed with the RED
selected.
4Press the joystick ( ) button again.
Result: A crosshair pattern will appear on the screen.
5Adjust convergence by using your remote control.
➣If a horizontal red line is visible, use Pand Pbuttons
to move the line so that it is superimposed on the horizontal
center-line (i.e., make a signal horizontal line that is as white
as possible).
➣If a vertical red line is visible, use
- and +buttons to
move the line so that it is superimposed on the vertical
center-line (i.e., make a signal vertical line that is as white as
possible).
6For blue adjustment, do the same as the above.
7After the blue convergence is correctly adjusted, press the
MENU button repeatedly to return to normal viewing.
➣Since the center convergence adjustments can not be
done after completing the side convergence adjustments,
do the center convergence adjustments first.
Adjusting Basic Convergence
SELECT ENTER EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON
SELECT ENTER EXIT
UP/DOWN L/R EXIT
POSITION 0:R/B
RED
PLEASE USE REMOTE CONTROL
CONVERGENCE
MANUAL CONVERGENCE
RED
√√
BLUE
√√
PERFECT FOCUS
√√

15
ENG
When the picture size is distorted after moving the set, use the
Perfect Focus feature to adjust for the optimum picture size set in
the factory.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the FUNCTION is selected and
press the joystick ( ) button.
Result: The FUNCTION menu is displayed.
3Move the joystick up or down until the CONVERGENCE is selected
and press the joystick ( ) button.
Result: The CONVERGENCE menu is displayed.
4Move the joystick up or down until the PERFECT FOCUS is selected
and press the joystick ( ) button.
Result: Perform Perfect Focus in the following sequence:
green ➞red ➞blue.
The Perfect Focus feature ends after the cursor flickers
for one second.
5Press the MENU button repeatedly to return to normal viewing.
➣You can use the Perfect Focus feature by simply pressing
the PERFECT FOCUS button on the remote control.
➣◆If any error happens during Perfect Focus, then
perform Perfect Focus once again.
◆If you can not make adjustments after Perfect Focus,
then make manual adjustments. Still you can not
make adjustments, contact your Service Center.
◆If Perfect Focus operates by a wrong use of remote
control, then press the MENU button to exit.
Using the Perfect Focus Feature
SELECT ENTER EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON
SELECT ENTER EXIT
CONVERGENCE
MANUAL CONVERGENCE
RED
√√
BLUE
√√
PERFECT FOCUS
√√
PERFECT FOCUS
MODE ON
EXIT

16
ENG
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the FUNCTION is selected and
press the joystick ( ) button.
Result: The FUNCTION menu is displayed with the LANGUAGE
selected.
4Select a particular language by moving the joystick left or right
repeatedly.
5When you have finished, press the TV button, or press the
MENU button repeatedly to return to normal viewing.
➣You can choose only English according to location.
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON
SELECT ENTER EXIT
SELECT ADJUST EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON

17
ENG
You can scan the frequency ranges available on your television and
in your area and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels”on page 21.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the CHANNEL is selected and
press the joystick ( ) button.
Result: The CHANNEL menu is displayed with the AUTO STORE
selected.
3Press the joystick ( ) button again.
Result: The AUTO STORE menu is displayed with the AREA
selected.
4Select your area by moving the joystick left or right. The following
countries are available: ASIA/W.EUROPE - CIS/E.EUROPE -
CHINA - HONGKONG/UK - AUSTRALIA - NZ/INDONESIA - SOUTH
AFRICA - AMERICA.
5Move the joystick up or down until the SEARCH is selected and
move the joystick left or right.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
6When searching and storing is complete, the SORT menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 21.
Exit the channel store function Press the MENU button
without sorting the channels repeatedly until the menus
disappear.
Storing the Channels Automatically
SELECT ENTER EXIT
AUTO STORE
AREA : ASIA/W.EUROPE
SEARCH : -/+
SELECT ADJUST EXIT
CHANNEL
AUTO STORE
√√
MANUAL STORE
√√
ADD/ERASE
√√
FINE TUNE
√√
SORT
√√
AUTO STORE
AREA : ASIA/W.EUROPE
SEARCH : -/+
SELECT SEARCH EXIT
SORT
FROM : P 1
TO : P--
STORE : ?
SELECT ADJUST EXIT
EXIT
P 8 C--
426 MHz 22%

18
ENG
When storing channels manually, you can choose:
◆Whether or not to store each of the channels found.
◆The number by which you wish to identify each stored
channel.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the CHANNEL is selected and
press the joystick ( ) button.
Result: The CHANNEL menu is displayed.
3Move the joystick up or down until the MANUAL STORE is selected
and press the joystick ( ) button.
Result: The MANUAL STORE menu is displayed with the COLOR
SYSTEM selected.
4If necessary, indicate the broadcasting standard required by
moving the joystick left or right.
Result: The color standards are displayed in the following order.
AUTO ➞ PAL ➞ SECAM ➞ NT4.43 ➞ NT3.58
➣NT4.43 is a “trick”playback mode used by special
VCR’s to play PAL-recorded videos in NTSC mode.
5Move the joystick up or down until the SOUND SYSTEM is selected
and move the joystick left or right.
Result: The sound standards are displayed in the following order.
BG ➞ DK ➞ I➞ M
6If you... Move the joystick...
Know the number ◆up or down to select the CHANNEL.
of the channel ◆left or right to indicate the required
to be stored required number.
Do not know the ◆up or down to select the SEARCH.
channel numbers ◆left or right to start the search.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7To assign a programme number to the channel, select the
PROG.NO.. Move the joystick left or right until you find the correct
number.
8To store the channel and associated programme number, select
the STORE and move the joystick left or right.
Result: OK is displayed.
9Repeat Steps 6to 8for each channel to be stored.
10 When you have finished manual storage, press the TV button, or
press the MENU button repeatedly to return to normal viewing.
Storing the Channels Manually
➞
➞
➞
➞
SELECT ADJUST EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : C12
STORE : ?
SELECT ADJUST EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : C12
STORE : ?
SELECT ADJUST EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : P12
STORE : ?
SELECT SEARCH EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : P12
STORE : ?
SELECT ADJUST EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : P12
STORE : ?
SELECT ADJUST EXIT
MANUAL STORE
COLOR SYSTEM : AUTO
SOUND SYSTEM : BG
SEARCH : 138MHZ
CHANNEL : C 6
PROG.NO. : P12
STORE : ?

19
ENG
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the CHANNEL is selected and
press the joystick ( ) button.
Result: The CHANNEL menu is displayed.
3Move the joystick up or down until the ADD/ERASE is selected and
press the joystick ( ) button.
Result: The ADD/ERASE menu is displayed.
4Move the joystick up or down to select the required channel.
5To add or erase the desired channel by moving the joystick left or
right.
6When you have finished adding and erasing channels, press the
TV button, or press the MENU button repeatedly to return to
normal viewing
Skipping Unwanted Channels
SELECT ENTER EXIT
CHANNEL
AUTO STORE
√√
MANUAL STORE
√√
ADD/ERASE
√√
FINE TUNE
√√
SORT
√√
SELECT ENTER EXIT
CHANNEL
AUTO STORE
√√
MANUAL STORE
√√
ADD/ERASE
√√
FINE TUNE
√√
SORT
√√
SELECT ADJUST EXIT
ADD/ERASE
P 0 : ADDED
P 1 : ADDED
P 2 : ADDED
P 3 : ADDED
SELECT ADJUST EXIT
ADD/ERASE
P 0 : ERASED
P 1 : ADDED
P 2 : ADDED
P 3 : ADDED

20
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-
tune the channel manually.
1Press the MENU button.
Result: The main menu is displayed.
2Move the joystick up or down until the CHANNEL is selected and
press the joystick ( ) button.
Result: The CHANNEL menu is displayed.
3Move the joystick up or down until the FINE TUNE is selected and
press the joystick ( ) button.
Result: The FINE TUNE menu is displayed with the TUNE
selected.
4To... Move the joystick...
obtain a sharp and ◆left or right.
clear picture and Result: The horizontal bar’s cursor
good sound quality moves to the left or right.
memorise adjusted ◆up or down to select the STORE.
picture or sound ◆left or right.
Result: OK is displayed.
erase adjusted ◆up or down to select the ERASE.
picture or sound ◆left or right.
Result: OK is displayed.
5When you have finished, press the TV button, or press the
MENU button repeatedly to return to normal viewing.
Fine tuning Channel Reception
SELECT ENTER EXIT
CHANNEL
AUTO STORE
√√
MANUAL STORE
√√
ADD/ERASE
√√
FINE TUNE
√√
SORT
√√
SELECT ADJUST EXIT
FINE TUNE
TUNE : -/+
STORE : ?
ERASE : ?
SELECT ADJUST EXIT
FINE TUNE
TUNE : -/+
STORE : OK
ERASE : ?
SELECT ADJUST EXIT
FINE TUNE
TUNE : -/+
STORE : ?
ERASE : OK
FINE TUNE