Samsung SC7215 User manual

Operating Instructions
VACUUM CLEANER
❈Before operating this unit, please read the instructions carefully.
❈For indoor use only.
Register your product at www.samsung.com/global/register
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 1

1
IMPORTANT SAFEGUARDS
1. Read all instructions carefully. Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate on the bottom of the
cleaner.
2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.
Do not use to suck up water.
3. This appliance is not intended for use by young persons or infirm persons without
supervision unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the appli-
ance.
4. Do not use the vacuum cleaner without a dust bag. Replace the dust bag before it is
full in order to maintain the best efficiency.
5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep
the vacuum cleaner away from stoves and other heat sources.
Heat can deform and discolour the plastic parts of the unit.
6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage
the cleaner parts. Do not stand on the hose assembly. Do not put a weight on the
hose. Do not block the suction or the exhaustion part.
7. Switch the vacuum cleaner off at the machine before unplugging from the electrical
outlet. Do not pull on the cord to disconnect the plug from the electrical outlet. Ensure
that it is disconnected before attending to the filter.
8. The plug must be removed from the socket out-let before cleaning or maintaining the
appliance.
9. The use of an extension cord is not recommended.
10. If your vacuum cleaner is not operating correctly, switch off the power supply and
consult an authorized service agent.
11. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
12. The vacuum cleaner is provided with a self-resetting thermal cut-out which automati-
cally shuts off on over-heating. Overheating can be caused by blockage in the filter,
nozzle, tube or hose. After removing the cause and allowing the motor to cool, the
vacuum cleaner will automatically restart.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 2

1ASSEMBLING THE CLEANER
Features may vary according to model.
For storage, park the floor nozzle.
OPTION
▼
2
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 3

3
2OPERATING YOUR CLEANER
2-1 POWER CORD
2-2 HANDLE CONTROL TYPE ONLY
2-3 USING CYCLONE FILTER (OPTIONAL)
NOTE
When removing the plug
from the socket, please
take care to grasp the
plug, not the cord in order
to avoid undue stress.
• SLIDE TO THE STOP POSITION
Vacuum-cleaner switches off (stand by mode)
• SLIDE FORWARD TO MAX
Suction capacity increases smoothly up to maximum.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 4

4
2-4 USING FLOOR TOOLS
PARQUET SPECIALIST
HARD FLOOR SMART
OPTION
OPTION
CREVICE
UPHOLSTERY
DUSTING
Blanket brush Bedclothes or Blanket
Cut off pet hairs or
threads surrounding brush
by using scissors.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 5

5
12
VP-95B TYPE
VP-95M TYPE
4CHANGING THE DUST BAG
3
OPTIONAL
●FOR CLOTH FILTER BAG
After using, if the cloth bag is full of dust,
clean the cloth filter bag and use it again.
3DUST FULL INDICATOR
If the “Dust-Full” indicator changes to “RED” while you are clean-
ing, the dust bag, requires replacement.
NOTE : If the “Dust-Full” indicator continues to display “RED”
even after changing the dust bag, turn the cleaner off
and check whether the hose, tube or nozzle is clogged.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 6

6
5
CLEANING THE CYCLONE FILTER (Optional)
- CLEANING THE INNER PART OF CYCLONE FILTER
NOTE
It is necessary to use
Cyclone Filter while
cleaning.
1 2 3
4 5 6
78
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 7

7
6CLEANING THE INLET FILTER
12 3
NOTE : Do not allow the filter to become clogged as this may cause power reduction
or may damage the motor.
DJ68-00308J REV(0.1)
7OUTLET FILTER
123
PROBLEM CAUSE REMEDY
- IF YOU HAVE A PROBLEM
Motor does not start. No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Nozzle, suction hose or
tube is blocked.
Remove the object and empty/
wash cassette filter as required.
Cord does not rewind fully. Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and push
down the cord rewind button.
Vacuum cleaner does not
pick up dirt. Crack or hole in hose.
Check hose and replace if
required.
If you have any comments or questions regarding a Samsung products,
contact the SAMSUNG customer care center.
Country
AUSTRALIA
HONG KONG
MALAYSIA
SINGAPORE
Customer Care Center ☎
1300 362 603
2862 6001
1800-88-9999
1800-SAMSUNG (7267864)
Web Site
www.samsung.com/au
www.samsung.com/hk
www.samsung.com/my
www.samsung.com/sg
DJ68-00308J(0.1)-EN 3/7/06 9:14 PM Page 8