Samsung VAC8913EP User manual

❈Before operating this unit, please read the instructions carefully.
❈Avant d’utiliser l’appareil, lisez attentivement ce mode d’emploi.
VACUUM CLEANER
ASPIRATEUR
For household use only
Pour utilisation domestique seulement
Operating instructions
Manuel d’instructions
EN
FR
Register your product at www.samsung.com/global/register
Enregistrez vos produits Samsung en vous connectant sur :
www.samsung.com/global/register
EN
FR

EN-1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the following :
READ ALL INSTRUCTIONS BEFORE USING
THIS VACUUM CLEANER
WARNING
To reduce the risk of fire, electric shock, or injury.
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and
before servicing.
2. Do not use outdoors or on wet surfaces.
3. Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
4. Use only as described in this manual. Use only manufacturer’s recommended
attachments.
5. Do not use with damaged cord or plug. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, take it to a service
center.
6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run appliance over cord. Keep cord away
from heated surfaces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
8. Do not handle plug or appliance with wet hands.
9. Do not put any object into openings. Do not use with any opening blocked : keep
free of dust, lint, hair, and anything that may reduce air flow.
10. Keep hair, loose clothing, fingers, and all other parts of the body away from open-
ings and moving parts.
11. Do not vacuum anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
12. Do not use without dust bag and filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not use to vacuum flammable or combustible liquids such as gasoline or use in
areas where they may be present.
16. Store your vacuum cleaner indoors in a cool, dry area.

EN-2
17. Do not use extension cords or an outlet with inadequate current carrying capacity.
18. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
19. Unplug electrical appliances before vacuuming them.
20. The hose contains electrical wires. Do not use if damaged, cut, or punctured. Avoid
picking up sharp objects.
21. Always turn off this appliance before connecting or disconnecting either hose or
motorized nozzle.
SAVE THESE INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug(one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any way

EN-3
PARTS IDENTIFICATION
HANDLE
ON/OFF SWITCH
EXTENSION
WANDS
HEAD LIGHT
POWER BRUSH BUTTON FOR SUCTION
HOSE REMOVAL
TOOL STORAGE
COVER
ON/OFF
SWITCH
CORD REWIND
BUTTON
DUST-FULL
INDICATOR
HOSE
POWER CONTROL
BUTTON
HEIGHT
ADJUSTMENT
KNOB
SUCTION
CONTROL

EN-4
ASSEMBLING THE VACUUM CLEANER FOR USE
EXTENSION WAND
Attaching the Hose to the Canister
Slide the Hose Clamper into the canister Inlet
until it “Clicks” into place.(Fig. A-A)
Attaching the Extension Wand to the Hose
Slide the handle end of hose over the end of
the wand until it “Clicks” into place. (Fig. A-B)
They can be removed by pressing the button
on the Hose.
Attaching the Power Brush
Slide the end of the Extension Wand onto the
Power Brush Wand unitl it “Clicks” into place.
(Fig. A-C)
They can be removed by pressing the button
on the Extension Wand.
The Extension wand can be adjusted to your
height.
Hold the central area with one hand while pulling
the smallest tube out or pushing into the desired
length with the other hand.

EN-5
ON/OFF SWITCH
You can start or stop your vacuum cleaner by
pressing the on/off switch lightly with your toe.
POWER CONTROL
The vacuuming power can be adjusted to suit any situation with electrical power control.
POWER CORD
1) PULLING OUT
The power cord is long enough to drawn out for
convenience.
2) REWINDING
When you have finished cleaning,disconnect the
plug from the electrical outlet and simply press the
cord rewind button lightly with your toe.
When removing the power cord from the electrical outlet, grasp the plug,
not the cord.
NOTE :
eh
Press (+)button to heighten the power.
Press (-)button to lower the power.
* Manual suction power control
The flexible hose hose handle(suction control) has a
manual air flow regulator which allows you to briefly
alter the suction level : the further open the regulator
is, the weaker the suction power.

EN-6
AUTO MODE
eh
USING THE ACCESSORIES
• Dusting brush - for furniture, shelves,
books, etc.
• Upholstery brush - for cushions and
drapery.
• Crevice tool - for radiators,crevices,cor-
ners, between cushions.
• Power brush -The rotating brush
ensures that cleaning is carried out
more thoroughly.
If you press AUTO MODE, the power is automatically
set at 800watt.
For example, when dust bag is full, the quantity of air to
the motor will be decreased and power will be down fol-
lowingly. AUTO MODE, in this case, increases the
power automatically for sufficient suction.
If you want to go back to the normal control type, just
press "+" or "-" buttons.
OPERATING THE BRUSH HEAD
Push the ON/OFF switch(A) down.
(The brush switches on)
CREVICE
DUSTING
UPHOLSTERY

EN-7
PARK POSITION
Located in the top rear side of the vacuum cleaner,
there is a support for a convenient park position
during pauses when using the nozzle.
TRANSPORTING AND STORING THE VACUUM CLEANER
For easy storage and transportation, this vacuum
cleaner has a clip system built onto the body, which
will keep the tube, hose and nozzle in a vertical
position.
REPLACING THE DUST BAG
1) To open the dust cover of the dust bag
compartment, press the clamper
upwards(the clamper is located at the front
of the dust cover).
2) Remove the dust bag from the cleaner

EN-8
3) After removing the used dust bag, insert
the cardboard bag collar of the new dust
bag into its original position.
4) Press the dust cover down gently until
the clamper relocks.
DUST-FULL INDICATOR
If the “Dust-Full” indicator switches to “RED” while you are cleaning, the dust bag is full
and must be replaced.
If the “Dust-Full” indicator continues to display “RED” even after changing
the dust bag, turn the cleaner off and check whether the hose, tube or noz-
zle is clogged.
NOTE :

EN-9
MAINTENANCE OR REPLACEMENT OF THE FILTERS
1) INLET-FILTER.
• Open the dust cover.
• After detaching the filter, wash it lightly with water, dry it in the shade, and then insert it
in its original position.
• Close the dust cover.
2) OUTLET-FILTER.
• The outlet-filter which the air comes out from the vacuum-cleaner.
• Open the dust cover, and then pull the hook upward located at the front of the hepa fil-
ter.
• Remove and replace the exhausted outlet-filter.
• Close the hepa filter, and then close the dust cover.
Hepa Filter
Preliminary Filter
VACUUMING WITH THE POWER BRUSH
1. Attaching the Power Brush
The hose must be plugged into the canister and the power
brush must be plugged into the hose and extension wand
(see page 3).
2. Vacuuming
• For best results, move the power brush slowly using
short,overlapping strokes.
• For heavily soiled areas, repeat strokes in several directions.
• Turn height adjustment knob to match the surface being
cleaned.