Samsung Sv-5000w User manual

WORLDWIDE VIDEO

CASSETTE RECORDER

SV-5OOOW

Owner's Instructions

Code No: AC68-00402A

IMPORTANT SAFETY INSTRUCTIONS

To ensure proper warranty, please return your

registration card within two weeks. Record

the serial number from the back of the VCR

and the date of purchase in the space below.

Keep your purchase receipt with this manual

for easy reference.

Model Number

Serial Number

Date Purchased

Dealer

CAUTION

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR

BACK) NO USER SERVICEABLE

PARTS INSIDE REFER

SERVICING TO QUALIFIED SER-

VICE PERSONNEL

This symbol indicates high voltage is present inside. It is

dangerous to make any kind of contact with any inside part

of this product.

This symbol alerts you that important literature concerning

operation and maintenance has been included with this

product.

Note to CATVsystem installer: This reminder is provided to call CATV system installer's attention to

Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point of cable entry as practical.

Caution: FCC regulations state that any unauthorized changes or modifications to this equipment

may void the user's authority to operate it.

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention: pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousserjusqu'au fond.

Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is

an infringement of U.S. copyright laws.

Certain Canadian programs may be copyrighted and any unauthorized recording in whole or in part

may be a violation of these rights.

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance

to rain or moisture.

1. Read Instructions All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions All operating and use instructions should be followed.

IMPORTANT SAFETY INSTRUCTIONS

5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning,

6. Attachments Do not use attachments not recommended by the product manufacturer as they may cause

hazards,

7.

8.

Water and Moisture Do not use this product near water for example near a bath tub, wash bowl, kitchen

sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or

table, The product may fall, causing serious i[_ury to a child or adult, and serious dam

age to the product, Use only with a cart, stand, tripod, bracket, or table recommended

by the manufacturer or sold with the product. Any mounting of the product should fol

low the manufacturer's instructions and should use a mounting accessory recommended

by the manufacturer.

9. Cart Usage A product and cart combination should be moved with care, Quick stops, excessive force,

and uneven surfaces may cause the product and cart combination to overturn,

10, Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation

of the product and to protect it from overheating, These openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper venti

lation is provided or the manufacturer's instructions have been adhered to.

11. Power Sources This product should be operated only from the type of power source indicated on the

marking label, If you are not sure of the type of power supplied to your home, consult your product dealer

or local power company.

12. Grounding or Polarization-This product may be equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other), This plug will fit into the power outlet only one way. This is

a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug, If the plug

should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety put

pose of the polarized plug.

13. Power Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product,

14. Outdoor Antenna Grounding-If an outside antenna or cable ,, ,_] _

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against " " """'" '_" '.....

voltage surges and built up static charges. Section 810 of the

National Electrical Code, ANSI/NFPA 70 provides information

with regard to proper grounding of the mast and supporting ;"_"" ............

structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna dis-

charge unit, connection to grounding electrodes, and require ,,., ,_..,.,,, ,,,.-

ments for the grounding electrode.

15. Lightning For added protection for this product during a lightning storm or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable sys

tem. This will prevent damage to the product due to lightning and power line surges,

16. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall into such power lines or circuits, When installing

an outside antenna system, extreme care should be taken to keep from touching such power lines or cir

cults as contact with them might be fatal.

17. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock,

18, Object and Liquid Entry-Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short out parts that could result in a fire or electric shock, Never spill

liquid of any kind on the product.

19 Servicing-Do not attempt to service this product yourself asopening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

aWhen the power-supply cord or plug is damaged.

bIf liquid has been spilled or objects have fallen into the product,

cIf the product has been exposed to rain or water,

d If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation,

e If the product has been dropped or damaged in any way.

f When the product exhibits a distinct change in performance-this indicates a need for service,

21. Replacement Parts When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards,

22, Safety cbeck Upon completion of any service or repairs to this product, ask the service technician to per

form safety checks to determine that the product is in proper operating condition,

23. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

III

Quick Reference Guide

7b record a Program now lb record a Program and

let it stop automatically

7b record a Program when

you're away

Insert the cassette. Insert the cassette.

Select the channel by pressing the

CH buttons ( • or •) on the

remote control.

¸

Select the channel by pressing the Press REC for at least one second

CH buttons (• or • ) on the to start recording.

remote control

Insert the cassette.

Press the TIMER button an the

remote control.

CLOCK: I/JAN WED 12:32

CH DAY STANT4STOP

Av SET:_

DELETE :CLR/RST MENU

Enter the Timer program data.

Then press the MENU button.

qlml

I

i

Press REC for at {east one second

to start recording.

When you have finished recording,

press STOP (m).

Press REC several times until the

required recording time is

displayed.

Result: Recording stops automati-

cally at the end of the

required time.

i__ii_i( _iii_ii_ii_/_i_iii!i

Press VCR POWER to turn off the

VCR and to activate the timer.

Contents 1

• FOREWORD

•Safety Instructions ......................................................................................... 4

• Getting Started .............................................................................................. 5

• VCR OVERVIEWS

• Front View of the VCR ................................................................................... 6

• Rear View of the VCR ................................................................................... 6

• Display Indicators .......................................................................................... 7

• Infrared Remote Control ................................................................................ 7

• CONNECTING YOUR VIDEO CASSETTE RECORDER

• Worldwide VCR Background ........................................................................

• Worldwide TV Color System ..........................................................................

• Multi-System VCR vs Worldwide VCR ..........................................................

• System Conversion with the Worldwide VCR ................................................

• Tape Conversion with the Worldwide VCR ...................................................

• Deciding How to Connect Your VCR .............................................................

• Connecting Your VCR to the TV ....................................................................

• SETTING UP YOUR VIDEO CASSETTE RECORDER

• Inserting the Batteries in the Remote Control ................................................

• Initial Setup ....................................................................................................

• User Setl Setting ..........................................................................................

• User Set2 Setting ..........................................................................................

• Setting the Date and Time .............................................................................

• To turn On-Screen Information on/off ............................................................

• Setting the VCR RE out System ....................................................................

• Setting the RF OUT CHANNEL .....................................................................

• Presetting the Stations Automatically ............................................................

• Presetting the Stations Manually ...................................................................

• RECORDING TELEVISION BROADCASTS

• Selecting the Cassette Type ..........................................................................

• Selecting the Recording Speed .....................................................................

• Protecting a Recorded Cassette ....................................................................

• Recording a Program ....................................................................................

• Stopping a Recording Temporarily ................................................................

• Recording a Program with Automatic Stop ....................................................

• Using the Timer Programming Feature .........................................................

• VCR Plus+ Recording (AMERICA only) ........................................................

• VCR Plus+ Set up (AMERICA only) ..............................................................

• Checking a Preset Recording ........................................................................

• Cancelling a Preset Recording ......................................................................

• PLAYING BACK

• Playing a Cassette .........................................................................................

• Selecting the PLAY SYSTEM Mode ..............................................................

• Receiving Stereo Broadcasts ........................................................................

• Receiving SAP Broadcasts ............................................................................

• SQPB (Super VHS Quasi PlayBack) .............................................................

• Adjusting Picture Alignment Manually ...........................................................

• Adjusting Picture Sharpness .........................................................................

• Selecting the Audio Output Mode ..................................................................

8

9

10

11

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

3O

31

32

Contents (cont.)

• REWINDING AND FAST-FORWARDING

• Rewinding and Fast-forwarding a Cassette ................................................... 33

• Playing a Cassette in Slow Motion ................................................................ 33

• Playing a Sequence Frame by Frame ........................................................... 34

• Playing a Sequence at Variable Speeds ....................................................... 34

• SPECIAL FUNCTION

• STROBE ........................................................................................................ 35

• ART ............................................................................................................... 35

• MONITOR ...................................................................................................... 35

• SEARCHING FOR A SEQUENCE

• Searching for a Specific Sequence ............................................................... 36

• Using the Tape Counter ................................................................................ 37

• ADVANCED RECORDING FEATURES

• Using the Assemble Edit Function ................................................................. 38

• Connecting Other Equipment to Your VCR ................................................... 39

• Recording from Another VCR or Camcorder ................................................. 40

• TV System Conversion .................................................................................. 41

• Playback Conversion ..................................................................................... 41

• Conversion Recording ................................................................................... 42

• Hi-Fi Audio System ........................................................................................ 43

• Audio Dubbing a Pre-recorded Cassette ....................................................... 44

• Recording an FM Simulcast Program ............................................................ 45

• OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS

• Locking Your VCR ......................................................................................... 46

• Resetting Your VCR ...................................................................................... 46

• Technical Specifications ................................................................................ 47

• SOLVING PROBLEMS

• Troubleshooting Guide .................................................................................. 48

• GLOSSARY

• Glossary of Terms ......................................................................................... 49

• WORLD BROADCAST SYSTEMS 50

• INTERNATIONAL SERVICE NETWORK" .............................................................................................. 51

Symbols

Press/push Hold down important

= Step number

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

.oto iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

Safety Instructions 1

iiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiii The following illustrations represent the precautions to be taken when using this video cassette

iiiiiiiiiiiiiiiiiiiiiiiirecorder.

iiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiii _ The lightning flash with the arrowhead in the triangle is a warning sign alerting you to

iiiiiiiiiiiiiiiiiiiiiiii daogNo°Tuo_VE°ltTg_ivcidethepr°duct"

iiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiii,.

iiiiiiiiiiiiiiiiiiiiiiii _

iiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiDo NOT expose the VCR to De NOT expose the VCR to

direct sunlight, any liquids.

iiiiiiiiiiiiiiiiiiiiiiii DO NOTexposetheVCRto

iiiiiiiiiiiiiiiiiiiiiiii extreme temperature conditions

iiiiiiiiiiiiiiiiiiiiiiii (below5_C(41°F) andab°ve

iiiiiiiiiiiiiiiiiiiiiiii 40°C(104°F)orto extreme

iiiiiiiiiiiiiiiiiiiiiiii humidity conditions (less than

iiiiiiiiiiiiiiiiiiiiiiii 10%andmorethan75%).

iiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiii DO NOT place anyobjectson

iiiiiiiiiiiiiiiiiiiiiiii theVCRorremoteoontrol.

iiiiiiiiiiiiiiiiiiiiiiii

li',i_/

j_

During a storm and/or lightning,

unplug the VCR from the AC

outlet and antenna.

If the remote control is not

used for a long period of time,

remove the batteries and store

it in a cool, dry place.

THIS UNIT IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS.

Getting Started

Thank you for purchasing a SAMSUNG Video Cassette Recorder (VCR).

Together with your VCR, you will find the following accessories in the box.

REMOTE CONTROL

& BATTERIES "AAA" OWNER'S

INSTRUCTIONS

&POWERADAPTOR

COAXIAL CABLE

(EUROPE) COAXIAL CABLE

& RF ADAPTORS

(AMERICA)

AN RCA CABLES

Your Owner's Instructions contain much valuable information on setting up and using your VCR.

Please take the time to read them as they will help you take full advantage of the VCR's features.

The manual is organized as follows:

•Aseriesofstep-by-stepproceduresforeachfunctionavailableformsthemainbodyofthe

manual

•Youcanconsulttheglossaryonpage49, toobtainanexplanationofthemaintechnicalterms

used throughout this manual

•On pages 6 and 7, you will find illustrations of the VCR (front and rear), the display and the

remote control unit to help you find the buttons and understand the symbols displayed.

Preparing Your Video Cassette Recorder

Before being able to play and record video cassettes, you must prepare and connect your VCR.

•Insert batteries in the remote control.

•ConnectyourVCRtothetelevision.

•Set the date and time used to display information on the television screen.

•Preset the stations.

All these operations are essential so you must follow the step-by-step instructions carefully.

Front View of the VCR l

POWER

BUTTON

EJECT

BUTTON

RECORD RESET

BUTTON BUTTON

VIDEO CASSETTE

COMPARTMENT REW

BUTTON

PLAY

BUTTON

RCA V_DEO RCA AUDIO CHANNEL

iNPUT JACK L,R INPUT BUTTONS

JACKS

SYSTEM STANDARD PAUSE/STILL STOP

OUTPUT SELECTION BUTTON BUTTON

BUTTONS

Rear View of the VCR

0

RCA AUDIO L,R

OUTPUT2JACKS

RCA AUDIO RCA AUDIO RC A VIDEO ANTENNAIN

L_R OUTPUT1 L_RIHPUT INPUTJACK RF CONNECTOR

JACKS

VIDEO VIDEO AUDIO/VIDEOIN/OUT OUT TO TV

OUTPUT2 OUTPUT1 SCART(EURO-21)JACK RFCONHECTOR

JACK JACK

Display Indicators

1 Timer indicator 5Conversion indicator 9Multi-function display

2Recording speed ir_dicator 6 Output select indicator 10 Hi-Fi indicator

3Cassette in/out indicator 7 SQPB Indicator 11 Audio Level meter

4Input select indicator 8 INDEX Indicator

Infrared Remote Control

VCR POWER B

REC.SPEED BUTTON

PICTURE SEARCH BUTTON

SAMSUNG

I=

Worldwide VCR Background

"Worldwide Communication through VCR"

Today, the Video Recorder isa major media and communication tool, used for both business and home

entertainment. Furthermore, the emergence of the camcorder has extended the versatility of video

enablinghomevideomaking.

Video communication is increasingly becoming a global medium, but different TV broadcasting systems

around the world hinder the worldwide exchange of video tapes.

J

The Samsung $V-5OOOW overcomes the incompatibility of different TV broadcasting systems through

sophisticated digital technology, allowing any standard VHS tape to be played on any TV, anywhere in

the world (with free voltage).

Worldwide TV Color System ]

iiiiiiiiiiiiiiiiiiiiiiiiiiii¸

iiiiiiiiiiiiiiiiiiiiiiiiiiii:Many countries have different TV signal formats, with no exchangeability between them. This makes it

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiimpossibletoplaybackorrecordtapeswithdifferentsignalformats. Thisworldwidecommon VCR

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiovercomesthisproblombyconvortingthesignalformatofanytapointothe,ormatyoudesire.

ComparisonofTVcolorsystems

iiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiii.TSC.Ts04.43

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiNumberof

iiiiiiiiiiiiiiiiiiiiiiiiiiii__c_oo,o0,,oos

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiField

iiiiiiiiiiiiiiiiiiiiiiiiiiii_frequency

iiiiiiiiiiiiiiiiiiiiiiiiiiii_L,ootro_uooo_

!!!!!!!!!!!!!!!!!!!!!!!!!!!!Colorsignal

iiiiiiiiiiiiiiiiiiiiiiiiiiiiimodulation

iiiiiiiiiiiiiiiiiiiiiiiiiiii:_y_tem

iiiiiiiiiiiiiiiiiiiiiiiiiiii:Colorsignal

!!!!!!!!!!!!!!!!!!!!!!!!!!!!frequency

iiiiiiiiiiiiiiiiiiiiiiiiiiii_Borst_,0oo,

iiiiiiiiiiiiiiiiiiiiiiiiiiii_

!!!!!!!!!!!!!!!!!!!!!!!!!!!!

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_e-

iiiiiiiiiiiiiiiiiiiiiiiiiiiii>

iiiiiiiiiiiiiiiiiiiiiiiiiiii

PAL-M PAL PAL-N SECAM MESECAM

525 625

60Hz 50Hz

15.734kHz 15.625kHz

Sub carrier suppression quadrature modulation FM modulation

3.579545 4.433619 3.575611 4.433619 3.582056 DB 4.25MHz

MHz MHz MHz MHz MHz DR 4.40625MHz

Fixed phase Inverted by 1 H DR.DB a_ternation

Classification of TV color systemsby country

• " NTSC

• " PAL

• " SECAM

: Korear US., Canadar Japanr Taiwan, and Philippines

_1. PAL-M

: United Kingdomr Germany, Western Europe, China, and Singapore

: France, Eastern Europe, and CIS

: Brazil

_1. PAL-N : Argentina (The tape is the same asthat of PAL)

_1. NTSC4 43 : Pseudo NTSC signal which is made to use NTSC tape in the Middle East

(The tape is the same as that of NTSC3 58)

_1. MES[CAM : The name of a tape which uses the SECAM signal recording method,

........................ [he output signal during playback is SECAM signal,

.....................SV-5000W accepts all woddwide Broadcasting systems except %CAM-L (France region),

!!!!!!!!!!!!!!!!!!!!!!__

...... Worldwide Broadcasting system is B/G, IrD/K, M, N, L,

!!!!!!!!!!!!!!!!!!!!!!!!!_

iiiiiiiiiiiiiiiiiiiiiiiiiiii_

Multi-System VCR vs Worldwide VCR

The Worldwide VCR issimilar to the Multi-System VCR in that it will play back tapes recorded in any .......................

iiiiiiiiiiiiiiiiiiiiiii

_u,t,-_,_em_ iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

_ _ _ iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

The TV must correspond to the system of the tape being iiiiiiiiiiiiiiiiiiiiiii

Tape duplication with system conversion (eg NTSC to PAL) is iiiiiiiiiiiiiiiiiiiiiii

no_o,_,_,o iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

_V-_OOO_or,_i_oW_ iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

_ iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

_ iiiiiiiiiiiiiiiiiiiiiii

..............................._ _ iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

Recordings can be made in any TV Broadcasting System, iiiiiiiiiiiiiiiiiiiiiii

evenifthetapeisofadifferentsystem; iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

Tapeduplicationwithsystemconversionispossible. iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

System Conversion with the Worldwide VCR 1

System conversion is the most complex digital process undertaken by the Worldwide VCR, converting

iiiiiiiiiiiiiiiiiiiiiiiiithe "input" into a different "output'; eg from NTSC to PAL, or from PAL to SECAM.

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii _'_'_"

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiNTSC_3.sg) NTSC(_.5o)

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii NTSC 4.43 NTSC 4.43

iiiiiiiiiiiiiiiiiiiiiiiii PAL PAL

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii PAL-M PAL-M

!!!!!!!!!!!!!!!!!!!!!!!!!

iiiiiiiiiiiiiiiiiiiiiiiii PAL-N PAL-N

iiiiiiiiiiiiiiiiiiiiiiiii SECAM SECAM

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii MESECAM (TAPEONLY)

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii [JVCR digitally converts scanning

......................... VCR automatically selects the selected in step II.

!!!!!!!!!!!!!!!!!!!!!!!!! lines, frequency 5e_ds and color

......................... correct TV broadcast system of

_signal into the desired system as

iiiiiiiiiiiiiiiiiiiiiiiiithei.putsig,a,:

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii _

iiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiii tape loaded for playback i I

iiiiiiiiiiiiiiiiiiiiiiiii B_ During pLAYBACK

iiiiiiiiiiiiiiiiiiiiiiiii W. on which playback Is to Playback can be viewed

!!!!!!!!!!!!!!!!!!!!!!!!! The 'input' comes from the

iiiiiiiiiiiiiiiiiiiiiiiii be viewed - is selected on

iiiiiiiiiiiiiiiiiiiiiiiii t_eVO_oo_ot'.oo,

iiiiiiiiiiiiiiiiiiiiiiiii

i __°_°°'_° I .....o_

iiiiiiiiiiiiiiiiiiiiiiiii /

iiiiiiiiiiiiiiiiiiiiiiiii - _°_

iiiiiiiiiiiiiiiiiiiiiiiii Output:

iiiiiiiiiiiiiiiiiiiiiiiiii °-_'_°_ I

iiiiiiiiiiiiiiiiiiiiiiiii .Tsc

iiiiiiiiiiiiiiiiiiiiiiiii

I_l'JI, I]lll'Jll

IIIIII

IT ape Conversion with the Worldwide VCR

One of the most useful functions of the Worldwide VCR is the combination of tape duplication and

system conversion, more simply known as "Tape Conversion". This allows the user to copy, for

example, a SECAM tape and simultaneously convert it to PAL or NTSC. This isparticularly useful for

duplicating home video camcorder recordings and sending them to friends or relatives abroad.

SV_5000W

ASA PLAYBACKVCR

SAMSUNG

Worldwide VCR

m

2ridVCR

ASA RECORDINGVCR

A.yVCR

Corresponding

VHS Tape_

PAL'M _

SECAM

ASAPLAYBACKVCR

Corresponding VCR

sv-g000W

ASARECOROtNGVCR

SAMSUNG

WorldwideVCR

8mm CAMCORDEB

AS A PLAYBACK VCB

Carncolder

Corresponding

SV-5000W

ASA RECORDING VCB

SAMSUNG Worldwide

VCR

Any VHS Tape

Adapter

2nd VCR

AS A PLAYBACK VCR

CorrespondingVCB

0

iiii

SV=5000W

AS A RECORDING VCR

$AMSUNG

Deciding How to Connect Your VCR

You must take into account various factors when deciding how to connect your various audio and/or

video systems.

•Typesofconnectorsavailableonyoursystems.

•SystemsconnectedpermanentlytotheVCR(satellitereceiverforexample)orfromtimeto

time (camcorder for example).

Your VCR is equipped with the following connectors.

Connector Location Type Direction Recommended Use

AV Rear SCART In/Out • Television

LINE Rear AudioNideo RCA Out • Television

• Other VCR

LINE 1 Front Audio/Video RCA In • Audio system

• -_ • Camcorder

• Other VCR

LINE 2 Rear AudioMdeo RCA In • Audio system

• Camcorder

• Satellite receiver

• Other VCR

OUT TO TV Rear 75 OOut • Television

coaxial c_

IN FROM ANT. Rear 75 OIn • Antenna

coaxial -_] • Cable television network

(_e,, Whenever you connect an audio or video system to your VCR, ensure that all units are

switched off,

Refer to the documentation supplied with your equipment for detailed connection instructions

and associated safety precautions,

Connecting Your VCR to the TV 1

A

To receive television programs from an over-the-air or cable

television network, a signal must be received from one of the

following sources,

_, An outdoor antenna,

_, An indoor antenna,

@A cable television system,

(1_ Make sure that both the television and the VCR are

switched off before connecting the cables.

1 Remove the 75£_coaxial cable from the television.

2Connect this cable to the 75£2coaxial socket marked • F on the

rear of your VCR.

3Plug the coaxial cable supplied into the _ socket on your VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the antenna on the television.

5Connect one end of the RCA cable supplied to the output

jacks(OUT1 or OUT2) on the rear of the VCR.

:_ Respect the color coding of the Audio and Video In/Out

cable.

6 Connect one end of the SCART cable to the EURO AV socket on

the rear of the VCR.

7 Plug the other end (of the RCA cable or SCART cable) into the

appropriate connector on the television.

@ Regardless of the type of connection chosen, you must

always connect the coaxial cable supplied, Otherwise, no

picture will be visible on the screen when the VCR is

switched off.

NOTICE:

Use the supplied RE adaptors as needed when making RF

connections,

[NTSC/PAL-M Region]

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when

you:

•purchase the video cassette recorder ; or

•find that the remote control is no longer working

correctly,

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2Insert two AAA or equivalent batteries (supptied), taking care to

respect the polarities.

_, + on the battery with + on the remote control.

_, - an the battery with - on the remote control.

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

IInitial Setup

The VCR automatically displays the initial setup MENU when the

VCR isplugged into the AC outlet for the first time.

1

2

3

4

Ptugthe VCRintothe AC outlet.

Result: TheLAM_A6a: SETisdisplayed.

Press the t, o and OK button to select your favorite language.

Result: The COON'Z'RYSeT is displayed.

Press the t, o, o button to se{ect your country region.

Result: The country list is displayed.

Press the t, o, ,_ and OK button to select your country.

_" If your country does not appear in the country list, then

select OTHERS.

** AMERICA **

U.s.A. _CANADA

MEXICO BRAZIL

ARGENTINA CHILE

COLOMBIA VENEZUELA

PERU PANAMA

OTHERS :M

AT _ MEMORY: (OK)

USER SET1 Setting 1

The user set is initially set at the factory. If you want to make any

changes to the USER SET, please follow the instructions below.

1 Press MENU on the remote control.

Result: The programming menu is displayed.

2 Press the *,., ._ button to select user set.

Result: The USER SET1 is displayed.

3 Press *,., _ to select the USER SET1 item.

4 Check below to change the item.

• TAPE SELECT ;EIS0/

TI20

CLOCK TYPE :I2H

PLAY SYSTEM :AUTO

OSD :ON

USER SET2

SAW • END: (MENU) /

USER SET2 Setting

**MENU**

TI_mRPROGEme_IN_

USER SET

INSTALLATION

LANGUAGE SET

CLOCK SET

AT _" END: (MENU)

TAPE SELECT iElS0/

TI20

CLOCK TYPE :I2H

PLAY SYSTEM :AUTO

OSD ;ON

USER SET2

\A. _ END :(MENU ) /

1 Press MENU on the remote control.

Result: The programming menu is displayed.

2 Press the *, *, i button to select user set.

Result: The USER SET1 is displayed.

3 Press *, *, _. to select the USER SET2.

4 Press *, *, _. to select the USER SET2 menu item.

COLOR ;ON

BLUE SCREEN ;ON

SQPB :OFF

USERSETI

kA. _ END:tMENU)/

5 Check beiow to change the item. r_

*USER SET2

iTEM USAGE COMMENT

SAP SAP on/off Initial mode is SAP OFF.

COLOR COLOR or B/W initial mode is an. Color off mode is

select B/W. if color distortion occurs in

the play or conversion mode, then

select color off mode.

BLUE BLUE SCREEN initial setting is blue screen on. Ifany

SCREEN on/off problem occurs with the blue

screen, then select off.

SQPB S-VHS Playback See page 31.

USER SET1 USER SET1 select Select to go to USER SET1 page.

* USER SET1

iTEM USAGE COMMENT

TAPE tape length select Select the recording tape type for

SELECT remaining time.

CLOCK 12H/24H mode Select your favorite ctock type.

TYPE

PLAY play tape system The VCR automatically selects the

SYSTEM selection play system. If an auto detection

error occurs, then select the play

system manually.

OSD OSD display on/off Initial setting is on.

USER SET2 USER SET2 select Select to go to USER SET2 page.

Samsung SV-5000W User manual

Popular VCR System manuals by other brands