Samsung SW60ASP User manual

CONTENTS Page
FEATURES............................................................................................1
DESCRIPTION OF PARTS....................................................................2
SAFETY INSTRUCTIONS .....................................................................3
INSTALLATION & MAINTENANCE......................................................4
ENVIRONMENT................................................................................4
IN CASE OF PUMP-DRAINED WASHER.......................................4
HOW TO CONNECT WATER SUPPLY HOSE................................4
CLEANING THE FILTER NET..........................................................5
HOW TO ADD THE FABRIC SOFTENER.......................................5
HOW TO PUT THE DETERGENT IN ..............................................5
CLEANING THE FILTER..................................................................5
LEVELLING.......................................................................................5
PRECAUTIONS................................................................................6
TO DO A CLEAN WASHING ...........................................................6
WASHING INSTRUCTION.....................................................................6
PROCEDURE...................................................................................6
WASH PROGRAM............................................................................7
WASHING PROGRAM DETAILS..........................................................7
OPTIONAL CYCLE................................................................................8
TROUBLESHOOTING...........................................................................8
SPECIFICATION
Owner’s Instructions
SW50ASP/SW60ASP
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 1

1
FEATURES
3
WATERFALL FLOW
• The Waterfall Flow injected from under
the pulsator cascades with full force
back into the tub, pushing down any
clothes that float right under the water
surface. It is this Waterfall Flow that
enables this washing machine to
effectively wash large and heavy
items, such as bluejeans and blankets.
1
2
SOFTENER DISPENSER
• The Softener Dispenser releases the
fabric softener at the appropriate time
when the last rinsing proceeds.
MAGIC FILTER
• This unique magic Filter ensures that
all the lint inside the tub is captured for
top quality filtering results to deliver
consistently effective cleaning results.
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 2

2
DESCRIPTION OF PARTS
CONTROL PANEL
DRAIN-HOSE (PUMP)
WATER SUPPLY HOSE(HOT)
WATER SUPPLY HOSE (COLD)
LID
Be sure to keep the lid
closed during washing
and spinning.
Lint will be collected in
the filter during
washing.
FILTER
DETERGENT BOX
GROUND LEAD When the water pipe is metal, make sure to cover the end of the ground wire.
POWER CORD
WATER DRAIN HOSE
RAT PROTECTION
PANEL
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
FRONT CONTROL
PANEL
BLEACH INLET
PULSATOR
FABRIC SOFTENER
DISPENSER
WATERFALL FLOW
SPIN BASKET
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 3

3
SAFETY INSTRUCTIONS
●Where an unearthed power cord is not fitted,
be sure that the washer is grounded.
To avoid electrical shock use metal piping for the ground
connection.
Take care not to ground the washer to gas pipes or
telephone cables due to the danger of explosion from
lightning strikes.
●During spinning, don't put your
hand in the spin basket.
Because the spin basket is rotating at the
high speed, rotating parts may injure your
hand.
●Openings must not be obstructed by carpeting
when the washing machine is installed on a
carpeted floor.
●Turn off water taps when the washer is not in
use to avoid water pressure damage to the
pump.
●To minimize the possibility of electric shock,
unplug this appliance from the power supply or
disconnect the washer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
●The appliance is not intended for use by young
children or infirm persons without supervision.
●Young children should be supervised to ensure
that they do not play with the appliance.
●If the power supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
●Place clothes evenly into the washer as
unevenly distributed laundry may cause
excessive out-of-balance noise and vibration.
●Maximum hot water supply temperature
60 degrees.
● Before washing, check all pockets.
If nails or pins remain in pockets, they may damage the
washer or clothes.
●Don’t press the control panel with a sharp
object.
Panel damaged or malfunction may occur.
If the control panel for this washer is damaged,
it must be replaced by a repair shop appointed by the
manufacturer, as special purpose tools are required.
● Do not operate this appliance if it is damaged,
malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged
cord or plug.
●Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
●The instructions for use shall specify the
maximum mass or dry cloth in kg, for which the
appliance is designed.
●If the appliance is supplied from a cord
extension set or electrical portable outlet
device the cord extension set or electrical
portable outlet device should be positioned so
it is not subject to splashing or ingress of
moisture.
WARNING!
To reduce the risk of fire, electric shock, or injury to persons when using your appliance,
take care to adhere to the following precautions.
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 4

4
INSTALLATION & MAINTENANCE
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the
wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak
surface, noise or vibration occurs. (Allowable slope
is 1 degree)
Never install the washer in a very steamy
environment or where it might be open to
the rain.
Excessive moisture may cause an electrical shock
hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by
direct heat,never place the washer near furnaces,
boilers,etc. Do not place under direct sunlight.
IN CASE OF PUMP-DRAINED WASHER
a
b
c
c
1. Remove the adaptor from the
water supply hose.
2. First,using a "+" type screw
driver, loosen the four screws
on the adaptor. Next,take the
adaptor and turn part(b)
following the arrow for gap
about 5mm between them.
3. Connect adaptor to the water
tap by tightening the screws
firmly.
Then,turn part (b) following the
arrow and put (a) and (b)
together.
5. Connect the other end of the
water supply hose to the inlet
water valve at the top of the
washer.
Screw the hose clockwise all
the way in.
6. If the water tap is a screw
type,assemble a water supply
hose that fits to the tap as
shown.
4. Connect the water supply hose
to the adaptor. Pull down the
part (c) of the water supply
hose. When you release part (c)
the hose is automatically
connects to the adaptor making
a 'click' sound.
HOW TO CONNECT WATER SUPPLY HOSE
Check the type of tap fitting which is in your laundry and then see appropriate instruction below:
A tap of ordinary type is desirable In case of square tap
● Take out the internal part of the connector
and join it in the following way.
ORDINARY TAP SQUARE TAP ROTATING TAP Internal part
● Be sure to join tightly
the drain hose into the
drain-outlet on the left
side of the machine.
● Take out the
cap-hose and
connect the
outlet-hose.
● Install the drain
hose in the position
of about 70~80cm
above the ground.
cap-hose
outlet-hose
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 5

•Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
•Place the machine more than
10cm away from the wall.
•Adjust the legs on feet
for levelling .
5
CLEANING THE FILTER NET
1.Push the upper part of
the filter and pull in. 2.Open the cover as shown in the figure. 3.Clean the filter. 4. Close the cover and insert the lower
part of the filter in the basket first and
then push the filter with "click" sound .
1. Place a rag under washer filter not to wet the floor.
2. Turn the filter-cap to the left.
3. Take out the filter and remove any sludge.
4. Reassemble in reverse order.
CLEANING THE FILTER
(pump drained washer)
•When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
•Do not use detergent, bleach or starch into
the Softener Inlet.
•Using too much softener may produce
unsatisfactory results.
•Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
•Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
HOW TO ADD THE FABRIC SOFTENER
1. Open the detergent box by pulling in the direction of the arrow as shown in the figure and then put the powder detergent in
the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
HOW TO PUT THE DETERGENT IN
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it may flow down at any time.
•If the washer is not leveled with the ground, it makes the machine
tremble more or be out of order. So, make sure that the washer is
leveled properly.
LEVELLING
LockLoosen
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
Water
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 6

6
WASHING INSTRUCTION
WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.
Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.
How to earth an outlet with earthing terminals when
an earthed power load is not fitted.
Outlet with earthing terminals:
●Even when the internal wires of the earthing terminals are joined,
connect the earthing conductor (green) of the machine to the tap.
When using an extension cord and a boosting transformer:
●Make sure that the earthing conductor is connected.
Never make an earthing to
●The telephone line, lightning rod, or gas pipe as it is
extremely dangerous in case of lightning strikes.
PROCEDURE
1. Sort the laundry into separate wash loads.
Each load of washing should contain clothing which needs the same washing conditions.
For example, you should not wash delicate clothes with very dirty work clothes.
2. Load the laundry into washing.
Before load, check all pockets, and close zippers, hooks and eyes.
3. Add the detergent. (see page 5)
4. Add the fabric softener. (see page 5)
5. Close the lid.
6. Press power button.
7. Choose the wash program & optional cycle. (see page 7~8)
If you choose “SENSOR”program you don’t need to select water level.
Water level is set automatically at “SENSOR”program.
Press the START/PAUSE button.
8. Select the water level.
Before choosing the water level, remember following things.
When you choose SENSOR, HEAVY-DUTY, ECONO-WASH, WOOL program,
water level is selected “AUTO”automatically, but if you wat to choose water level manually
you can select. HIGH, MEDIUM, LOW, MINIMUM
TO DO A CLEAN WASHING
•Press the POWER botton.
•Pour a little detergent into case-detergent.
•Turn on water supply to the wshing machine.
•Choose the SOAK in CYCLE button and the HIGH in WATER LEVEL button.
•Press the START/PAUSE button.
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:50 PM Page 7

Wash Time (SW50ASP)
Wash Time (SW60ASP)
Wash Action
Wash Temp.
Deep Rinse
Spin Time
Total Time
(High Water level)
HEAVY DUTY
26 min
20 min
Normal
HOT
HOT + COLD
COLD
COLD
7 min
49 min
SENSOR
25 min
20 min
Normal
HOT
HOT + COLD
COLD
COLD
5 min
49 min
7
9. Select the water temperature.
Before choosing the water temperature remember the following:
•You can choose COLD →COLD+HOT →HOT on all programs.
HOT is hot wash and cold rinse.
COLD is cold wash and cold rinse.
10. Close the lid and press the START/PAUSE button.
11. Do you wat extra rinse?
For extra rinses press the cycle key 1 to 5 times (depending on the number of extra rinse required).
You can select up to 5 extra rinses or return to a single rinse by pressing the cycle key.
The time left display will show the number of rinses selected.
Note tat the extra rinse program is not available when pause is selected or during the spin cycle.
WASH PROGRAM
SENSOR Program
● The best washing program is chosen automatically
● Load size and water level is determined automatically
❈ Unplug the power cord after washing.
ECONO WASH Program
● Saving your time and energy
● This program is suitable for heavily soiled laundry
● Load size and water level is determined automatically
or you can choose the water level you want
❈ Unplug the power cord after washing.
WOOL Program
● This program is suitable for woollen clothes
● Only high and medium water levels are available
❈ Unplug the power cord after washing.
HEAVY DUTY Program
● This program is suitable for heavily soiled laundry
● Load size and water level is determined automatically
or you can choose the water level you want
❈ Unplug the power cord after washing.
WASHING PROGRAM
WOOL
5 min
5 min
Gentle
HOT + COLD
COLD
HOT + COLD
COLD
1 min
29 min
ECONO WASH
5 min
5 min
Normal
HOT
HOT + COLD
COLD
COLD
3 min
32 min
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:51 PM Page 8

8
OPTIONAL CYCLE
TROUBLESHOOTING
Washing machine won’t work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is the fuse all right?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or
hose connection clogged?
Is the water tap frozen?
If water is not supplied in 60 minutes,
a buzzer will sound, and the remaining
time indicator will shown “4E”.
Water does not drain
Is the drain hose down? (No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water does not drain in 15
minutes, a buzzer will sound, and the
remaining time indicator will show “5E”
While lid is opening,
the washing machine won’t work
Make sure to close the lid while washing machine is
operating.
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is the lid closed?
WASH ONLY
● When you choose this cycle, wash cycle is operated.
● Pressing optional cycle key during washing changes
the wash time in two minute intervals.
● The wash time can be changed to between 3 and 25
minutes.
● Load size and water level is determined automatically
❈ Unplug the power cord after washing.
SOAK
● The laundry is soaked in water so that heavy dirt can be
eliminated sufficiently.
● You can choose soak cycle after choosing wash
program.
● When you select soak function, 5 minute cycle (1 min.
washing then 4 min. pause) continue for 30 minutes
before main wash program.
● Load size and water level is determined automatically
❈ Unplug the power cord after washing.
SPIN ONLY
● You can choose this cycle, only cycle is operated.
● Pressing cycle key during spinning only cycle changes
the spin dry time.
The spin dry time can be changed to between 1 and 7
minutes.
❈ Unplug the power cord after washing.
DELAY START
● This function allows you to delay the start of your
chosen wash program for 3, 4, ... 18 hours.
● By pressing the delay start key you can select delayed
period for 3, 4, ... 17, 18 hours, and your washing
machine will finish the selected wash program after the
delayed period.
RINSE AND SPIN ONLY
● When you choose this cycle, only rinse & spin cycle are
operated without wash cycle.
● Pressing cycle key during operation changes the
number of rinse (see above).
You cannot change the spin dry time using this function.
❈ Unplug the power cord after washing.
RINSE ONLY
● When you choose this function, only rinse cycle is
operated.
● Pressing function key during rinsing changes the
number of rinse. Up to 5 rinses can be optionally
selected.
❈ Unplug the power cord after washing.
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:51 PM Page 9

330 426
5.0 6.0
540 X 560 X 850 588 X 618 X 955
31 38
106(high) 138(high)
50~780KPa 50~780KPa
Power input(Watts)
Load capacity(kg)
Size(WxDxH)(mm)
Net Weight(kg)
Water Consumption(liters)
Water Pressure(min-max)
SW50ASP SW60ASP
IF YOU NEED HELP WITH YOUR NEW
SAMSUNG WASHING MACHINE
Contact your nearest Samsung office or Samsung authorized
service center for technical assistance
SPECIFICATION
CODE NO. : DC68-01488C
SW50ASP60ASP-GB-01488C-76% 6/17/02 2:51 PM Page 10