Samsung WD6122CKC User manual

Washing Machine
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/global/register
WD6122CKC
WD6122CKS
WD6122CK-02384Q_EN.indd 1 2007-05-04 ¿ÀÈÄ 6:04:17

2_ features
features
1. Air wash
Air wash can remove any bad smells from the laundry or reduce the need for dry cleaning.
 Mite sterilization: Sterilizes any bacteria or mites in the bedding where the water-wash is
not effective.
2. Silver nano (Ag+) anti-bacteria, sterilization system
Protects your skin and keeps the interior clean and pleasant by removing bacteria from the
laundry and adding a silver-nano coating to it.
3. Washing to drying with one button
We can select the drying time manually. The machine features an auto sensor of the optimal
dry state that enables you to perform the whole wash cycle including the drying cycle using
one button.
WD6122CK-02384Q_EN.indd 2 2007-05-04 ¿ÀÈÄ 6:04:17

Safety information _3
safety information
Throughout this manual, you’ll see Warning and Caution notes.
These warnings, cautions, and the important safety instructions that follow do
not cover all possible conditions and situations that may occur.
It’s your resposibility to use common sense, caution, and care when installing,
maintaining, and operation your washer. Samsung is not liable for damages
resulting from improper use.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual means:
WARNING
Hazards or unsafe practices that may result in severe personal injury or
death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when
using your washer, follow these basic safety precautions:
BEFORE USING THE APPLIANCE
Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.
The appliance is designed for home use only.
Make sure that water and electrical connections are made by qualified technicians,
observing the manufacturer’s instructions (see “Installing the Washing Machine”) and local
safety regulations.
All packaging and shipping bolts must be removed before the appliance is used. Serious
damage may occur if they are not removed. See “Removing the shipping bolts”.
Before washing clothes for the first time, you must run a complete cycle without clothes.
See “Washing for the first time”.
SAFETY INSTRUCTIONS
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet
or set the Power button to Off.
Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Always unplug the appliance and turn off the water after use.
Before you open the door of the appliance, check that the water has drained. Do not open
the door if you can still see water.
Pets and small children may climb into the appliance. Check the appliance before each use.
CAUTION
WARNING
WD6122CK-02384Q_EN.indd 3 2007-05-04 ¿ÀÈÄ 6:04:17

4_ Safety information
The glass door becomes very hot during the washing cycle. Keep children away from the
appliance while it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or
unqualified persons may cause injury and/or make more serious repairs to the appliance
necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
This appliance should only be serviced by an authorized service center, and only genuine
spare parts should be used.
This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to ensure that they do not play with
the appliance.
If this appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set or electrical portable outlet device must be positioned so that it
is not subject to splashing or ingress of moisture. Additionally, the cord extension set or
electrical portable out let device must be of a current rating suitable for the appliance.
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
Do not use processed water containing oil, cream or lotion, which is usually found in skin-
care shops or massage clinics.
• Otherwise this will cause the packing to be deformed, which causes a malfunction or
water leak.
A stainless washing tube does not usually rust. However if some metal such as a hair pin is
left in the tube for an extended time, the tube could rust.
• Do not leave water or bleach containing chlorine in the tube for an extended period of
time.
• Do not regularly use or leave water containing iron in the tube for an extended period of
time.
• If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to
the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a
metal brush)
For washing machines with ventilation openings in the base, that a carpet must not
obstruct the openings.
Use the new hose-sets and old hose-sets should not be reused.
The dryer is not to be used if chemicals have been used for cleaning.
safety information
WD6122CK-02384Q_EN.indd 4 2007-05-04 ¿ÀÈÄ 6:04:18

Contents _5
contents
INSTALLING THE WASHING
MACHINE
6
6 Unpacking the Washing Machine
6 Overview of the washing machine
7 Selecting a location
7 Adjusting the leveling feet
7 Removing the shipping bolts
8 Connecting the water supply hose
8 Connecting the water supply hose (Option)
9 Positioning the drain hose
10 Plugging in the machine
WASHING A LOAD OF LAUNDRY
11
11 Washing for the first time
11 Putting detergent in the washing machine
12 Overview of the control panel
13 For the Silver Wash washing
14 Childlock (button lock function)
14 Washing clothes manually
15 Washing clothes using Fuzzy Logic
16 Using Dry course
16 Using delay start
17 To Add Laundry
17 Using Clean Tub
18 Performing Air Wash
19 Washing tips and hints
MAINTAINING THE WASHING
MACHINE
20
20 Draining the washing machine in an
emergency
20 Repairing a frozen washing machine
20 Cleaning the exterior
21 Cleaning the detergent drawer and recess
21 Cleaning the debris filter
22 Cleaning the water hose mesh filter
TROUBLESHOOTING
23
23 Problems and solutions
24 Understanding error messages
PROGRAMME CHART
25
25 Programme chart
APPENDIX
26
26 Fabric care chart
26 Electrical warnings
26 Protecting the environment
27 Declaration of conformity
27 Specification
WD6122CK-02384Q_EN.indd 5 2007-05-04 ¿ÀÈÄ 6:04:18

6_ Installing the washing machine
installing the washing machine
UNPACKING THE WASHING MACHINE
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received
all of the items shown below. If the washing machine was damaged during shipping or you do not have all
of the items, contact your Samsung dealer immediately.
OVERVIEW OF THE WASHING MACHINE
Wrench Water supply hose Hose guide Bolt hole covers
Cold Water supply
hose
Drain Hose
Control panel
Detergent drawer
Door
Adjustable feet
WD6122CK-02384Q_EN.indd 6 2007-05-04 ¿ÀÈÄ 6:04:20

Installing the washing machine _7
SELECTING A LOCATION
Before you install the washing machine, select a location with the following characteristics:
• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)
• Away from direct sunlight.
• Adequate ventilation
• Room temperature that will not fall below 0˚C
• Away from sources of heat such as coal or gas
Make sure that the washing machine does not stand on its power cord.
Ventilation openings must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
ADJUSTING THE LEVELING FEET
If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the
feet):
1. Loosen the leg bolt by turning it with your hand until it is at
the desired height.
2. Tighten the locking nut by turning it with a (-) screwdriver.
If the washer is placed on an uneven or weak surface, noise or
vibration occurs.
(Only a l degrees angle is allowed.)
REMOVING THE SHIPPING BOLTS
Before using the washing machine, you must remove the four
shipping bolts from the back of the unit. To remove the bolts:
1. Loosen all bolts with the wrench before removing them.
2. Take each bolt head and pull it through the wide part of the
hole.
Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
01 Installing the washing machine
WD6122CK-02384Q_EN.indd 7 2007-05-04 ¿ÀÈÄ 6:04:22

8_ Installing the washing machine
CONNECTING THE WATER SUPPLY HOSE
The water supply hose must be connected to the washing machine at one end and to the water
faucet at the other. Do not stretch the water supply hose. If the hose is too short replace the
hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water
supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink’s cold water faucet and
tighten it by hand. If necessary, you can reposition the water supply hose at the washing
machine end by loosening the fitting, rotating the hose, and retightening the fitting.
Option :
1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water faucet and
tighten it by hand.
CONNECTING THE WATER SUPPLY HOSE (OPTION)
1. Remove the adaptor from the water supply hose.
2. First, using a ‘+’ type screw driver, loosen the four screws on
the adaptor. Next, take the adaptor and turn part(b) following
the arrow until there is a 5mm gap.
installing the washing machine
L-Shaped arm
Supply valve
Cold water
supply valve
option
WD6122CK-02384Q_EN.indd 8 2007-05-04 ¿ÀÈÄ 6:04:23

Installing the washing machine _9
3. Connect adaptor to the water tap by tightening the screws
firmly.
Then, turn part (b) following the arrow and put(a) and (b)
together.
4. Connect the water supply hose to the adaptor. Pull down
part (c) of the water supply hose.
When you release part (c) the hose automatically connects
to the adaptor making a ‘click’ sound.
5. Connect the other end of the water supply hose to the
inlet water valve at the top of the washer. Screw the hose
clockwise all the way in.
• If the water tap has a screw type faucet, connect the water
supply hose to the tap as shown.
• After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply. In case the faucet is square
or too big, remove the spacing ring before inserting the faucet into the adaptor.
• The appliance is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
POSITIONING THE DRAIN HOSE
The end of the drain hose may be positioned in three ways:
Over the edge of a wash basin
The drain hose must be placed at a height of between 60 and
90 cm. To keep the drain hose spout bent, use the supplied
plastic hose guide. Secure the guide to the wall with a hook or
to the faucet with a piece of string to prevent the drain hose
from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60
cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no longer than 90 cm.
01 Installing the washing machine
a
b
c
WD6122CK-02384Q_EN.indd 9 2007-05-04 ¿ÀÈÄ 6:04:25

10_ Installing the washing machine
installing the washing machine
PLUGGING IN THE MACHINE
For European Users.
You will NOT need to ground the plug of the washing machine.
For U.S. Users.
You MUST ground the plug of the washing machine. Check with a licensed electrician before
using the machine to make sure it is properly grounded.
For U.K. Users.
Wiring lnstructions
- WARNING THIS APPLIANCE MUST BE EARTHED.
This appliance must be earthed. In the event of an electrical
short circuit, earthing reduces the risk of electric shock
providing an escape wire for the electric current.
The appliance is equipped with a mains lead which includes
an earth wire for connecting to the earth terminal of your mains
plug.
The plug must be plugged into a socket that is properly
installed and earthed.
* The wires in this mains lead are coloured in accordance with
the following code:
- Green and yellow : Earth
- Blue : Neutral
- Brown : Live
• AS the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
indentifying the terminals in your plug, proceed as follows.
• Connect the green and yellow wire to the terminal in the
plug marked with the letter E or the earth symbol ( ) or
coloured green or green-and-yellow.
• Connect the blue wire to the terminal marked with the letter
N or coloured black.
• Connect the brown wire to the terminal marked with the
letter L or coloured red.
* Consult a qualified electrician or service technician if in
doubt about any of these instructions.
The manufacturer of this washing machine will not accept
any liability for damage to persons or material for non
observance of these requirements.
There are no user serviceable parts inside the washing
machine and if the mains lead of this appliance is damaged,
it must only be replaced by qualified service personnel
approved by the manufacturer because special tools are
required.
GREEN AND
YELLOW
BLUE
13 AMP FUSE
BROWN
WARNING
Ensure that the plug and
power cord are not damaged
before use. If you have any
reason to remove the moulded
plug from this appliance,
immediately remove the fuse
and dispose of the plug.
Do not connect the plug to
a mains socket under any
circumstances as there is a
danger of electric shock.
CIRCUITS
Your washing machine should
be operated on a separate
circuit from other appliances.
Failure to do this may cause
the circuit breaker to trip or
the fuse to blow.
WD6122CK-02384Q_EN.indd 10 2007-05-04 ¿ÀÈÄ 6:04:26

Washing a load of laundry _11
washing a load of laundry
WASHING FOR THE FIRST TIME
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the Power button.
2. Pour a little detergent into compartment ( ) in the
detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
• This will remove any water from the manufacturer’s test run
remaining in the machine.
Dispenser : Detergent for prewash or starch.
Dispenser : Detergent for main wash, water softener, pre-soaking agent, bleach and stain
removal product.
Dispenser : Additives,e.g.fabric softener or former (fill no higher than lower edge of insert “A”)
PUTTING DETERGENT IN THE WASHING MACHINE
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment ( ).
3. Add softener into compartment ( ) (if you desire).
4. Add prewash detergent into compartment ( ) (if you desire).
Concentrated or thick fabric softener and conditioner
must be diluted with a little water before being poured
into the dispenser (prevents the overflow from becoming
blocked.)
02 Washing a load of laundry
MAX
CAUTION
WD6122CK-02384Q_EN.indd 11 2007-05-04 ¿ÀÈÄ 6:04:39

12_ Washing a load of laundry
OVERVIEW OF THE CONTROL PANEL
Display panel Displays the remaining wash cycle time, all of washing information and error
messages.
Air Wash button Use to remove bad smells.
Selected in the sequence: Suit/Jumper  Knit  Coat  Bedding  Cancel
Wash selection
button
Use this to only perform washing or prewash.
Selected in the sequence: Main Wash  Prewash + Main Wash  Main
Wash.
The washing time cannot be adjusted (for the Cotton course).
Prewash can only be selected for Cotton, Intensive, Boil, Eco-Boil, Blanket
and Towel.
Temperature
selection button
Selected in the sequence.
220 V 40˚C  60˚C  Cold  40˚C
120 V 30˚C  40˚C  Cold  30˚C
The water temperature varies depending on the course.
 Do not allow only hot water to be supplied.
Rinse selection
button
Select this to add a rinse cycle or only perform the rinse cycle.
You can select this up to 5 times.
Spin selection
button
You can select the spin speed, if necessary.
If only the spin cycle is selected and Start/Pause is pressed in the middle of
the spin cycle, the machine starts spinning from the beginning.
 The spin speed can vary, depending on the course.
 No Spin means no spinning is performed after the drain.
Dry selection
button
Selected in the sequence: Cupboard  Extra  Iron  Light  Time (30min
 1:00min  1:30min  2:00min  2:30min)  Cupboard.
Silver Wash
button
Silver water is supplied in the wash cycle as well as the last rinse, featuring
sterilization and antibacterial coating.
Stop&Add
selection button Select this to add the laundry amid the process.
Delay Start
selection button
Press the button repeatedly to cycle through the available delayed start
options (up to 24 hours maximum in one hour increments).
Displayed hours means the time of finished washing-cycle.
washing a load of laundry
7
6
5
4
3
2
1
8
6
5
4
3
2
178910 11 12 13 14
9
10
WD6122CK-02384Q_EN.indd 12 2007-05-04 ¿ÀÈÄ 6:04:40

Washing a load of laundry _13
Power
Saving(Lighten)
The temperature will be reduced by 10 degrees more than initially specified.
The reduced temperature does not deteriorate the washing performance
greatly, and saves 25% electricity. This feature is available for at least -40˚C.
Fuzzy Control
dial Turn the dial to select one of the 10 available wash programs.
Start/Pause
selection button Press to pause and restart programs.
Power
selection button
Press once to turn the washing machine on, press again to turn the washing
machine off.
If the washing machine power is left on for longer than 10 minutes without
any buttons being touched, the power automatically turns off.
FOR THE SILVER WASH WASHING
The Ag+ water is added during the washing, and then a sanitary, sterilizing washing will be performed.
During the rinse, the Ag+ water is added at the last time of rinse. It treats clothes with silver antibiotic
coating and functions to protect the propagation of bacteria.
1. Open the door, put in the clothes and close the door again.
2. Press Power button.
3. Select a course by turning the course selection dial.
4. Press Silver Wash button.
5. Put suitable amount of detergent and fibre softener in the detergent tray, and close it again.
: Put a suitable amount of detergent in the detergent tray for main washing, and put in fiber
softener to the lower level than the marked line.
For Prewash, put a supplementary detergent in the detergent tray.
Silver Wash: If it is used together with fibre softener, its effect may be decreased.
6. Press Start/Pause button.
: It automatically performs an optimal washing with sensing the weight of clothes.
02 Washing a load of laundry
11
12
13
14
WD6122CK-02384Q_EN.indd 13 2007-05-04 ¿ÀÈÄ 6:04:42

14_ Washing a load of laundry
CHILDLOCK (BUTTON LOCK FUNCTION)
Is a function for children not to handle the washing machine.
Setting/Release
If you want to set up or release that function, press both Temperature and Rinse buttons at the
same time in 3sec.
How to Set up:
1. It can be set up during the power-on or operation of the washing machine.
2. If you set up the “CHILDLOCK” function during the laundry operation, no button except for
Power button can be controlled until you release that function.
3. The CHILDLOCK lamp will be lighted.
1. In case the power is on again, the “CHILDLOCK” function remains unchanged.
2. In case of releasing that function, follow the way of release mentioned above.
3. When the other buttons, except for the Power button, are not controlled after you turn
on the Power , check CHILDLOCK LAMP, please.
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature.
220 V Cold, 40˚C, 60˚C, 75˚C, 95˚C
120 V Cold, 30˚C, 40˚C, 55˚C, 70˚C
8. Press to Rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed.
10. Press the Delay Start button repeatedly to cycle through the available delayed start options
(up to 24 hours maximum in one hour increments.). Displayed hours means the time of
finished washingcycle.
11. Press the Start/Pause button and the machine will begin the cycle.
washing a load of laundry
WD6122CK-02384Q_EN.indd 14 2007-05-04 ¿ÀÈÄ 6:04:42

Washing a load of laundry _15
WASHING CLOTHES USING FUZZY LOGIC
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Logic” automatic control
system. When you select a wash program, the machine will set the correct temperature, washing time, and
washing speed.
To wash clothes using the Fuzzy Logic programs:
1. Turn on your sink’s water faucet.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Add the detergent, softener, and prewash detergent (if necessary) into the appropriate
compartment.
Prewash is only available when washing Towel, Cotton, Boil, Eco-Boil, Intensive, Blanket.
It is only necessary if your clothing is heavily soiled.
7. Turn the Fuzzy Control dial to select the
appropriate program for the type of clothes
Cotton, Intensive, Boil, Eco-Boil, Quick,
Towel, Blanket, Wool, lingerie, Clean Tub.
You will see the indicators light up on the
control panel.
8. At this time, you can control the wash temperature, rinsing times, spin speed, delay time,
silver wash and dry button by pressing the appropriate option button.
(delay time, silver wash and dry button can be selected optionally by user.)
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin.
The process indicator will light up and the remaining time for the cycle will appear in the
display.
Pause Option
Until water supply is completed after starting operation, it is possible to put in the laundry or take
out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
The door will not open untill the machine stops or the power turns off.
2. Remove laundry.
02 Washing a load of laundry
WD6122CK-02384Q_EN.indd 15 2007-05-04 ¿ÀÈÄ 6:04:43

16_ Washing a load of laundry
washing a load of laundry
USING DRY COURSE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line
for the dried clothe of 7.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button and then press the Dry button.
: The standard course will be selected automatically.
Drying is availably selected only at the courses such as Towel, Cotton, Boil, Eco-Boil,
Intensive and Quick.
3. Select Dry button as follows.
: Every press of this button will select drying type repeatedly in the following order:
Cupboard  Extra  Iron  Light  Time[30 min  1:00 min  1:30 min  2:00 min 
2:30 min]  Cupboard
• It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it again.
5. Press Start/Pause button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If you select Drying function, the intensity of SPIN will be set up as High in default for
increasing the drying effect.
• If cold water is not supplied, drying will not be performed.
• If you do not take out clothes from the tub after the end of drying, a function of wrinkle
protection will be performed for about 30 minutes with the display of [End].
In order to take out the clothes: press firstly Start/Pause or Power button and take
them out.
• In case you wish to dry after hand washing, select both Spin and Dry at the same time.
USING DELAY START
You can set the washing machine to finish your wash automatically at a later time, choosing up to 24
hours maximum (in one hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin
counting down until it reaches your finish time.
4. To cancel “Delay Start”, press the Power button, then turn the washing machine on again.
WD6122CK-02384Q_EN.indd 16 2007-05-04 ¿ÀÈÄ 6:04:43

Washing a load of laundry _17
TO ADD LAUNDRY
1. Press the Stop&Add button.
• The washing machine will automatically pause to operate.
2. Wait about 30 seconds and check the Stop&Add button for the lamp state.
• Blinking: the machine drains water down to the safety level so it can get an additional
quantity of laundry (displayed in pause mode)
• Off: adding the laundry is possible.
The washing machine detects the internal quantity of laundry about 30 seconds before
deciding whether it could get more laundry.
3. Add the laundry.
4. Press the Start/Pause Button.
• Avoid adding the laundry when the machine has foamed up or is filled with water.
Otherwise, the foam or water may leak out of the door. So check it first before opening
the door.
USING CLEAN TUB
Is a course for washing the tub.
1. Press Power button.
2. Select the Clean Tub Course by turning the dial of Course Select.
3. Put an adequate amount of bleaching agent in the detergent tray ( ) for Main Laundry.
(See “Washing for the first time”.)
: You’d better use a powder-type detergent for more efficient washing.
If you want to wash it lightly : You may wash it just by selecting the 40°C-Water without
bleaching agent.
4. Press Start/Pause button.
About one time a month is enough for the tub-washing.
02 Washing a load of laundry
WD6122CK-02384Q_EN.indd 17 2007-05-04 ¿ÀÈÄ 6:04:43

18_ Washing a load of laundry
PERFORMING AIR WASH
Air-wash can remove any bad smells from the laundry owing to its powerful airing system. Clothing that can
be deodorized includes woolen coats, cotton or down jumpers, sweaters and suits. (Two suits or less)
1. Open the door, place the laundry inside and close the door.
2. Press the Power button.
3. Press the Air Wash button.
• Each time the button is pressed, the operating mode cycles through the following
sequence:
Suit/Jumper  Knit  Coat  Bedding  Cancel.
• When one of these is selected, no other button can be selected or run and you can only
select the delay start function from between 1:00 – 24:00.
4. Close the door and press the Start/Pause Button.
• If you do not remove the laundry immediately after the Air Wash is performed, the
machine performs an additional wrinkle protection process for 30 minutes.
• Press the Start/Pause or Power button to remove the laundry.
• The ‘insecticide’ process can kill bacteria living in ‘unwashable’ materials such as
blankets, pillows, cushions and needlework dolls.
• Avoid Air Washing the following clothes
- Sensitive clothes made of leather, mink, fur, silk, etc.
- Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits can loosen their
decorations.
- Clothes trimmed with buttons can cause them to break.
- Starchy clothes can become deformed.
• Avoid using the following clothes for the insecticide process
1) Hard bedding such as a wooden pillow (neck-rest)
- Pillows or blankets filled with plastic or starch rather than cotton.
- Electric blankets
2) Furry blankets
3) Bulky blankets
washing a load of laundry
WD6122CK-02384Q_EN.indd 18 2007-05-04 ¿ÀÈÄ 6:04:43

Washing a load of laundry _19
WASHING TIPS AND HINTS
Sorting your laundry: Sort your laundry according to the following characteristics:
• Type of fabric care label symbol: Sort laundry into cottons, mixed fibers, synthetics, silks,
wools and rayon.
• Colour: Divide whites and colours. Wash new, coloured items separately.
• Size: Placing items of different sizes in the same load will improve the washing action.
• Sensitivity: Wash delicate items separately, using the Wool wash program for pure new
wool, curtains and silk articles. Check the labels on the items you are washing or refer to the
fabric care chart in the appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine
drum, and the water tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should
be tied together.
Prewashing cotton: Your new washing machine, combined with modern detergents, will give
perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is
particularly dirty, use a prewash with a protein-based detergent.
Determining load capacity: Do not overload the washing machine or your laundry may not
wash properly. Use the chart below to determine the load capacity for the type of laundry you are
washing.
Fabric Type Load Capacity
Cotton / Intensive 12 kg
Boil / Eco-Boil 7 kg
Towel / Quick / Blanket 1sheet [Within 3kg]
Wool 5 kg
Dry 7 kg
Detergent tips: The type of detergent you should use is based on the type of fabric (otton,
synthetic, delicate items, wool) colour, wash temperature, degree and type of soiling.
Always use “low suds” laundry soap, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based upon the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, ask your water authority.
Keep detergents and additives in a safe, dry place out of the reach of children.
02 Washing a load of laundry
WD6122CK-02384Q_EN.indd 19 2007-05-04 ¿ÀÈÄ 6:04:43

20_ Maintaining the washing machine
maintaining the washing
machine
DRAINING THE WASHING MACHINE IN AN EMERGENCY
1. Unplug the washing machine from the power supply.
2. Open the filter-cover by using a coin or a key.
3. Unscrew the emergency drain cap by turning left. Grip the
cap on the end of the emergency drain tube and slowly pull
it out about 15 cm.
4. Allow all the water to flow into a bowl.
5. Reinsert the drain tube and screw the cap back on.
6. Replace the filter-cover.
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain
operations are normal.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and nonabrasive
household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
WD6122CK-02384Q_EN.indd 20 2007-05-04 ¿ÀÈÄ 6:04:44