SAN HIMA SH-BBQ-OYB20 User manual

USER MANUAL
FOLDING FIRE PIT
SKU: SH-BBQ-OYB20
V1.0

ABOUT US
Founded in 2018, the San Hima brand stands for passion and enthusiasm for exploring the
spectacular nature of the great outdoors. Since its inception, the trusted solutions and proven
designs that San Hima offers to the market have made adventure and travelling flexible and
enjoyable!
Based in Australia, San Hima has under its umbrella a wide selection of outdoor solutions,
including cargo systems, vehicle protection accessories and tow & trailer parts, that are designed
to help you carry your gear wherever your passion takes you and boost your performance when
conquering the peaks!
At San Hima, we have wild souls and we are committed to designing products that are tough
enough to take on any adventures and at the same time, making them safe and easy to use. These
values in our conviction are what drive us to make innovations. Since pursuit your passion
shouldn't be complicated.
Live the Peak, Conquer the Everest, San Hima is your brand of choice!

WARNINGS
Read the installation, operation and maintenance instructions thoroughly before installing or
servicing this equipment.
Failure to follow these instructions could result in fire or explosion, which could
cause property damage, personal injury or death.
This fire pit with logs or coals lit can produce carbon monoxide which has
no odor.
Using it in an enclosed space can kill you.
Never use this fire pit in an enclosed space such as a camper, tent, car or
home.
Carbon Monoxide Hazard
This fire pit is NOT to be operated by children.
This fire pit is NOT to be used in or on boats or recreational vehicles.
Do NOT alter this fire pit in any manner.
Do NOT use this fire pit until it is COMPLETELY assembled and all parts are securely fastened
and tightened.
Do NOT use in an explosive atmosphere. Keep outdoor area clean and free from combustible
materials, gasoline and other flammable liquids.
Do NOT use this fire pit under and overhead or near any unprotected combustible
constructions. Avoid using near or under overhanging trees and shrubs.
Always use this fire pit on a hard level non-combustible surface such as concrete, rock or
stone.
Always empty this fire pit before each use.
Do NOT wear flammable or loose clothing when operating this fire pit.
Do NOT use in windy conditions.
Keep all electrical cords away from a hot fire pit.
All surfaces of this fire pit are hot when in operation. To avoid burns, do NOT touch fire pit
until it has completely cooled unless you are wearing protective gear. Never touch ashes or
coals to see if they are hot.
Use heat-resistant gloves or hot pads when contacting handles.
Do NOT leave a lit fire pit unattended, especially around children and pets.
Do NOT remove ashes or coals until they are completely extinguished.
Use long sturdy fire pit tools when adding or moving logs or coals.
Do NOT place logs or coals directly into bottom of the fire pit. Place them only on the coal bed.
Do NOT lean over this fire pit when in use.
This fire pit should be thoroughly inspected and cleaned on a regular basis.

CARE AND MAINTENANCE
Inspecting
This fire pit should be inspected on a regular basis to ensure product safety and longer
product life.
1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If damage to any component is detected, do NOT operate it.
Warning: Do NOT attempt to inspect this fire pit until the fire is COMPLETELY out.
Cleaning
This fire pit should be cleaned on a regular basis to promote safer experiences and longer
product life.
1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn stains use a citrus based degreaser and a nylon scrubbing brush.
3. Rinse with water.
4. Remove built-up creosote from components with a chimney cleaning product.
Note: After repeated use, a slight discoloration of the finish may occur.
Warning: Do NOT attempt to clean this fire pit until the fire is COMPLETELY out and cool to
touch.
Storage
1. Once the fire is out, coals are cold and fire pit is cool to touch, remove ashes and properly
dispose.
2. Store the fire pit in a dry location to maximize product life.
3. Store the fire pit in a location away from children and pets.
Warning: Do NOT move or store this fire pit until the fire is COMPLETELY out and cool to
touch.

PARTS LIST
SPECIFICATIONS
Net Weight: 11.8kg
Grill Dimensions (Handles Excluded): 437 x 318mm
Side Plate Dimensions: 435 x 115mm
Pit Dimensions: 435 x 435 x 305mm
Height Increments (Fireplace Grill Bridge): 30mm, 4 Different Height Levels
Material: Fire Pit / Fireplace Grill Bridge: Stainless Steel
Fireplace Grill / Side Plates: Food-Grade 304 Stainless Steel
Base Plate / Fireplace Coal Bed: E-Coated Steel
Storage Bag: 600D Oxford Fabric
E: Fireplace Grill x1
F: Side Plates x2
G: Storage Bag x1
H: User Manual x1
A
B
C
D
E
F
GH
A: Folding Fire Pit x1
B: Base Plate x1
C: Fireplace Coal Bed x1
D: Fireplace Grill Bridge x1

ASSEMBLY INSTRUCTIONS
Step 1:
Place the base plate on a hard level
non-combustible surface.
Step 2:
Open the folding fire pit and clip it onto
the base plate.
Step 3:
Place the fireplace coal bed into the fire pit.
Step 4:
To turn the fire pit into a BBQ, open the
folding legs of the grill bridge and install the
grill bridge onto the fire pit.
Note: There are 4 different height levels to
let you adjust your cooking temperature.
Step 5:
Install the side plates and the grill onto the
grill bridge.

WARRANTY
San Hima warrants that each fire pit that is purchased while this Warranty is in effect will be
free from defects in materials and workmanship for a period of 1 year from the date of receiving
the product from San Hima or its authorized distributor/dealer. If it is believable to be defective
during the 1-Year Warranty Period, San Hima will, at its option, replace it with the same or
similar product, or issue a refund for the defective San Hima product. And San Hima will pay for
the cost of shipping or transportation of a defective component. This warranty terminates if a
Purchaser transfers the product to any other person. And please retain your purchase receipt
for Your records.
Please ensure that the San Hima fire pit should be assembled in accordance with warnings and
instructions listed in the user manual, and should be used for the purpose for which it was
designed.
Any and all warranty coverage does not cover: normal wear and tear, incorrect assembly,
damages as a result of failure to follow information in the user manual, unusual, improper or
negligent use or misuse, using the San Hima fire pit other than for the purpose for which it was
originally designed, improper repair or maintenance, alteration, abuse, acts of nature, terrorism,
vandalism, collision or adverse conditions.
If further information or investigation is required or if the claim does not meet the requirements
under our warranty, San Hima'll let you know.