Sandia Plastics Raven Series Guide

© 2013 Copy Rights Reserved Sandia Products, Inc.
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
1.5 HP, 115 Volt
Important Information and Safety Instructions
Register your Machine at www.sandiaplastics.com/registration.aspx
Serial No:
6-Quart Raven Backpack Series
REGISTER
YOUR
MACHINE
ONLINE!
Reliable Power
Fastest Pick-Up
Maximum Airow
Innovative Design
Lightweight
HEPA Filtration
New Equipment Warranty
Lifetime warranty on roto-molded polyethylene tank, 5-years on motor and all
electrical parts, 1-year on tools.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All
parts are warranted to be new and free from defects in workmanship and material,
under normal use to the original retail purchaser. This warranty limits manufacturer’s
liability for defects in workmanship or materials for replacement of defective parts
only. Manufacturer accepts no liability for incidental or consequential damages
arisen from the use of any equipment, defective or not. This warranty is in lieu of all
expressed or implied warranties and is extended only to the original retail purchaser.
Manufacturer sales and service representatives are not authorized to waive or alter the
terms of this warranty, or to increase the obligations of the manufacturer under the
warranty. Parts replaced or repaired under warranty are warranted for the remainder of
the original warranty period.
Freight charges and travel charges to and from the service provider shall be covered
for ninety (90) days from the original purchase date. After this ninety (90) day
period, freight charges shall be paid by the equipment owner, subject to manufacturer
discretion. Certain circumstances may require additional consideration. No travel
charges shall be covered after ninety (90) days.
Manufacturer covers up to 1-year (365 days) of service labor at manufacturer’s
calculated hourly labor rate/repair time when performed by a manufacturer’s
authorized-service provider. Ultimately, labor reimbursement costs are at the
discretion of the manufacturer. After 1-year, the original retail purchaser is responsible
for all labor costs with no manufacturer reimbursement.
Manufacturer charges a 15% restocking fee for any items that are being returned to
stock. Items must be new, unused and free of damage. Only good for up to 1-year
(365 days). After 1-year, manufacturer does not accept the return of any item(s) for a
reimbursed price.
Authorized warranty replacement parts need to come directly from the manufacturer.
Use of any other parts will void warranty. Manufacturer does not reimburse for parts
used by the customer that were not supplied directly for the machine under warranty.
The warranty starts on the purchase date by the original purchaser, subject to proof
of purchase. Please immediately register your machine online at www.sandiaplastics.
com/registration.aspx or return this Machine Registration Card at the time of
purchase. If proof of purchase cannot be identied, the warranty start date is ninety
(90) days after the inventory stocking date at the distributor’s warehouse.
Make a copy of this card for future reference.
© 2013 All Rights Reserved Sandia Products, Inc.
Sandia Products, Inc.
15571 Container Lane
Huntington Beach, CA 92649
Phone: [phone]
Toll Free: 800-983-5834
Fax: [phone]
www.sandiaplastics.com

Warranty
Registration
Mail to:
Sandia Products, Inc.
15571 Container Lane
Huntington Beach, CA 92649
See reverse side for warranty information.
Make a copy of this card for future reference.
© 2013 All Rights Reserved Sandia Products, Inc.
Please take a moment to register your machine. Fill out the
information below and mail back to Sandia Products immediately.
The warranty starts on the purchase date by the original purchaser, subject to proof of
purchase. Please immediately register your machine online at www.sandiaplastics.com/
registration.aspx or return this Machine Registration Card at the time of purchase. If
proof of purchase cannot be identied, the warranty start date is ninety (90) days after
the inventory stocking date at the distributor’s warehouse.
Machine Model Purchase Date
Motor Type Serial No.
Place of Purchase
Shipped To
Your Name Phone
E-mail Fax
Address Line 1
Address Line 2
City State Zip
Comments:
(2) 6-Quart Raven Backpack Vacuum
Dear Valued Customer,
Congratulations on the purchase of your 6-Quart Raven Backpack Vacuum! The world
of carpet cleaning is becoming more high-tech and competitive and we strive to provide
you with the most innovative products. Our backpack vacuum is yet another example of
this, bringing a new dimension to carpet and upholstery cleaning with its cutting-edge
features, quality and value.
Please review this manual paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be condent that simple maintenance will ensure that your
Backpack Vacuum provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering parts,
please call an authorized distributor.
Before you begin using your backpack vacuum, thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your 6-Quart Raven Backpack Vacuum!
Questions or Comments?
Phone: [phone]
Toll Free: 800-983-5834
Fax: [phone]
[email protected]
Mailing Address:
15571 Container Lane, Huntington Beach, CA 92649
Visit our Web site at www.sandiaplastics.com
Register your Machine at www.sandiaplastics.com/registration.aspx

© 2013 Copy Rights Reserved Sandia Products, Inc.
15571 Container Lane, Huntington Beach, CA 92649
Phone: [phone] | Toll Free: 800-983-5834 | Fax: [phone]
[email protected] | www.sandiaplastics.com
Please ll out the following information:
Model No:
Serial No:
Distributor Name:
Distributor Phone No:
Date of Purchase:
6-Quart Raven Backpack Series
By Sandia Products
6-Quart Raven Backpack Vacuum (3)
Table of Contents
New Equipment Warranty...................................................................................................4
Returned Material Authorization (RMA) Procedure ..........................................................4
1.0 Safety Instructions .......................................................................................................5
2.0 Grounding Instructions ................................................................................................6
3.0 Care of your Backpack Vacuum Cleaner .....................................................................7
4.0 Operating and Assembly Instructions. .........................................................................8
5.0 Trouble Shooting Guide.............................................................................................10
6.0 Machine Schematic Drawing.....................................................................................11
7.0 Machine Parts List .....................................................................................................12
8.0 5-Piece Tool Kit .........................................................................................................13

(4) 6-Quart Raven Backpack Vacuum 6-Quart Raven Backpack Vacuum (13)
New Equipment Warranty
Lifetime on roto-molded polyethylene tank, 5-years on motor and all electrical parts,
1-year on tools.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All
parts are warranted to be new and free from defects in workmanship and material,
under normal use to the original retail purchaser. This warranty limits manufacturer’s
liability for defects in workmanship or materials for replacement of defective parts only.
Manufacturer accepts no liability for incidental or consequential damages arisen from the
use of any equipment, defective or not. This warranty is in lieu of all expressed or implied
warranties and is extended only to the original retail purchaser. Manufacturer sales and
service representatives are not authorized to waive or alter the terms of this warranty,
or to increase the obligations of the manufacturer under the warranty. Parts replaced or
repaired under warranty are warranted for the remainder of the original warranty period.
Freight charges and travel charges to and from the service provider shall be covered for
ninety (90) days from the original purchase date. After this ninety (90) day period, freight
charges shall be paid by the equipment owner, subject to manufacturer discretion. Certain
circumstances may require additional consideration. No travel charges shall be covered
after ninety (90) days.
Manufacturer covers up to 1-year (365 days) of service labor at manufacturer’s calculated
hourly labor rate/repair time when performed by a manufacturer’s authorized-service
provider. Ultimately, labor reimbursement costs are at the discretion of the manufacturer.
After 1-year, the original retail purchaser is responsible for all labor costs with no
manufacturer reimbursement.
Manufacturer charges a 15% restocking fee for any items that are being returned to
stock. Items must be new, unused and free of damage. Only good for up to 1-year
(365 days). After 1-year, manufacturer does not accept the return of any item(s) for a
reimbursed price. Authorized warranty replacement parts need to come directly from the
manufacturer. Use of any other parts will void warranty. Manufacturer does not reimburse
for parts used by the customer that were not supplied directly for the machine under
warranty.
Returned Material Authorization (RMA) Procedure
Original purchaser (distributor/service center) must contact the manufacturer to follow
correct RMA/warranty procedures. Must include a copy of RMA Sheet enclosed in the
box with returned item. No returns shall be authorized unless proper RMA procedures are
followed. It is the responsibility of the distributor to repair the customer’s equipment as
soon as possible. If the distributor does not have the facilities to repair the equipment, it
may be shipped or taken to an authorized service center for repair.
Customer must contact the distributor prior to working on or changing out any parts, etc.
Manufacturer must issue an RMA Sheet containing approved labor time and replacement
parts. Do not send parts or equipment back to manufacturer without an RMA number and
approval. No labor will be paid for, nor part costs paid for or reimbursed that have not
been previously approved by the manufacturer. All warranty work must be approved and
authorized to qualify and appropriate warranty procedures must be followed.
8.0 5-Piece Standard Tool Kit
Drawing No. Item No. Description Quantity
110-0031 5” Upholstery Tool 1.00
210-0037 3” Round Dust Brush 1.00
310-0032 14” Scalloped Floor Tool 1.00
410-0033 17” Crevice Tool 1.00
510-0029 2-Piece, 2-Bend Button Lock Wand 1.00
123
4
5

(12) 6-Quart Raven Backpack Vacuum 6-Quart Raven Backpack Vacuum (5)
1.0 Safety Instructions
READ THIS MANUAL BEFORE OPERATING EQUIPMENT. KNOW THE
PROPER OPERATION, SAFETY INSTRUCTIONS, CORRECT APPLICATIONS
AND THE LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
The Backpack vacuum will afford you many years of trouble free operating satisfaction,
provided it is given the proper care. All parts have passed rigid quality control standards
prior to being assembled to produce the nished product. Prior to packaging, your
Backpack Vacuum was again inspected for assurance of awless assembly.
The Backpack Vacuum is protectively packed to prevent damage in shipment. We
recommend that upon delivery, unpack the unit and inspect it for any possible damage.
Only a visual inspection will reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered
your vacuum. As a shipper, we are unable to report any claim for damage. You must
originate any claim within ve (5) days.
This manual is for your protection and information. Please read carefully since failure to
follow precautions could result in discomfort or injury.
Reduce the Risk of Fire, Electric Shock or Injury
DO NOT USE ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE
INDOORS.
• DO NOT leave the vacuum unattended when plugged in. Unplug from the outlet when
not in use and before servicing.
• DO NOT vacuum up any liquids. This vacuum is for dry use only! To avoid electric
shock, DO NOT expose to rain. Store indoors. DO NOT use on wet surfaces.
• This is not a toy. Close attention is necessary when used around or near children.
• Use only as described in the safety instructions. Use only manufacturer-recommended
attachments, accessories, replacement parts and lters.
• DO NOT use the Backpack Vacuum with damaged cord or plug. If the vacuum is not
working as it should, because it has been dropped, damaged, left outdoors or exposed
to water, contact an authorized service center or manufacturer.
• DO NOT pull or carry by the cord, use cord as a handle, close a door on the cord, or
pull the cord around sharp edges or corners. Keep cord away from heated surfaces.
• DO NOT unplug the vacuum by pulling the cord. To unplug, grasp the plug, not the
cord.
• DO NOT handle the plug of the vacuum with wet hands.
• DO NOT put objects into openings. DO NOT use with any opening blocked. Keep
free of dust, lint, hair and anything that may reduce air ow.
• Keep hair, loose clothing, ngers and all body parts away from opening and moving
parts.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
7.0 Machine Parts List
Drawing No. Item No. Description Quantity
110-007-6 6-Quart Cloth Bag for 6-Quart Backpack 1.00
2A 10-0197 6-Quart Paper Bags (10 Pack) 0.10
2B 10-0197-HEPA 6-Quart HEPA Paper Bags (10 Pack) 0.10
3BP-6-L-GRYGRAN 6-Quart Backpack Lid - Gray Granite 1.00
410-0155 Hose Cuff Straight 1.00
510-0024 1-1/2” Black Vacuum Hose 1.00
610-0195 Swivel Cuff 1.00
7A 10-0008-B Dome Filter with Bag Support 1.00
7B 10-0219-6 Complete 6-Quart HEPA Filter (HEPA
Model Only)
1.00
8A 10-0013 Super Motor (Super Models Only) 1.00
8B 10-0012 Whisper Motor (Whisper and Aviation
Models Only)
1.00
8C 10-0346 D.P. Motor (Avenger Models Only) 1.00
910-0199 Vacuum Motor Gasket 1.00
10 10-0023 Shoulder and Waist Belt Washer 4.00
11 10-0022 Shoulder and Waist Belt Screw 4.00
12 10-0021 Shoulder and Waist Belt 1.00
13 10-0020 Cushioned Back Pad 1.00
14 BP-6-T-GRYGRAN 6-Quart Backpack Tank - Gray Granite 1.00
15 10-0015 1/4” Flat Washer 4.00
16 10-0014 Motor Screw 4.00
17 BP-6-B-BLKGRAN 6-Quart Backpack Base - Gray Granite 1.00
18 10-0016-6 6-Quart Deector Plate 1.00
19 10-0017 Deector Plate Screw 3.00
20 10-0017 Sound Dampening Band 1.00
21 10-0018 6-Quart Dual Cell Noise Filter 1.00
22 10-0019-6 Screw for Well Nut 1.00
23 10-0070 Well Nut for Cord Lock 1.00
24 10-0027-A Strain Relief Nut 1.00
25 10-0027 Strain Relief 1.00
26 10-0026 17” Power Cord (Cord Only) 1.00
27 10-0028 50-Foot Electrical Cord 1.00
28 10-0025 On/Off Switch 1.00

(6) 6-Quart Raven Backpack Vacuum 6-Quart Raven Backpack Vacuum (11)
1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury
• DO NOT use without the proper cloth ltration bag, paper lter bag and other lters in
place. Failure to do so, will VOID your warranty.
• DO NOT use the vacuum to pick up ammable or combustible liquids such as
gasoline or use in areas where they may be present.
• Use extra care when cleaning on stairs.
• DO NOT use where oxygen or anesthetics are used.
• Turn off all controls before unplugging. Make sure the on/off switch is in the OFF
position.
• The extension cord provided with this unit is 50-foot, 16/3-gauge wire and MUST be
used with this unit to ensure grounding protection.
• Replace damaged or worn parts immediately with genuine, original equipment parts to
maintain safety and to protect your limited warranty.
• DO NOT lubricate the motor.
• DO NOT tie extension cord to pigtail cord. This will damage the cord and will not be
covered under warranty.
• DO NOT overstretch the safety power cord between the vacuum and the electrical
outlet in the wall.
• DO NOT use without all lters correctly secured in place.
• When using the vacuum with a powerhead tool and connection, always turn OFF the
vacuum and nozzle tool before connecting or disconnecting either the hose or power
nozzle. Depending on your vacuum model, the hose may contain electrical wires.
DO NOT use when damaged, cut or punctured.
Always turn OFF the vacuum before connecting, disconnecting or working on the
vacuum. The vacuum must be connected to a properly grounded outlet only (see
grounding instructions, Section 2.0).
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK.
Electrical equipment must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current and reduces the risk
of electric shock. The vacuum is equipped with a cord containing a grounding conductor
and grounding plug. The plug must be inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a at bed terminal. The green insulated wire, with or without yellow stripes, is the
grounding wire.
6.0 Machine Schematic Drawing

(10) 6-Quart Raven Backpack Vacuum 6-Quart Raven Backpack Vacuum (7)
2.0 Grounding Instructions Continued
The electric vacuum is for use on a normal 120 volt circuit. It has a grounded plug that
ts the outlet illustrated in Figure A. If a properly grounded outlet is not available, a
temporary adapter, such as the adapter illustrated in Figure B and C, may be used to
connect the plug into a 2-pole outlet, as shown in Figure C.
The temporary adapter should be used only until a properly grounded outlet, Figure A,
can be installed by a qualied electrician. The green color rigid ear lug or grounding
means extending from the adapter must be connected to a permanent ground, such as
a properly grounded outlet box cover. Whenever the adapter is used, it must be held in
place by its grounding means and a metal screw, as shown in Figure C.
WARNING:
Improper connection of the equipment grounding conductor can result in a risk of electric
shock. Check with a qualied electrician or service person if you are in doubt as to
whether the outlet is properly grounded. DO NOT modify the plug provided with the
equipment. If it will not t into the outlet, have a proper outlet installed by a qualied
electrician.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
3.0 Care of your Backpack Vacuum Cleaner
Treat your vacuum as you would any other high grade precision made product.
Dropping, unreasonable bumping across thresholds and other misuses may result in a
damaged unit which will not be covered under warranty.
When not in use, the power cord should be wrapped around the molded-in cord wrap
for storage. After each use, wipe the vacuum body, accessories and power cord with a
slightly damp cloth.
WARNING: DO NOT use vacuum without the proper cloth ltration bag, paper
lter bag and other lters in place. Failure to do so, will VOID your warranty.
If using vacuum in a paint, sawdust or drywall environment, you must dispose of
paper lter bag and shakeout cloth lter bag after each use. Failure to do so will
cause severe damage to your vacuum and VOID your warranty. Dispose of paper
lter bag in a reproof container. The combination of urethane and wood, may
result in combustion.
5.0 Troubleshooting Guide
CAUTION: Always disconnect power cord before servicing vacuum.
WARNING: Repairs should only be performed by an authorized service center.
PROBLEM: Loss of vacuum
CAUSE SOLUTION
Cap is damaged Inspect and replace if needed
Faulty vacuum motor Call manufacturer or service center
Full paper bag lter Replace paper lter bag
Clogged hose or wand Remove obstruction
Loose or broken fan Call manufacturer or service center
PROBLEM: Motor is not running
CAUSE SOLUTION
Faulty on/off switch Call manufacturer or service center
Power cord defective Call manufacturer or service center
Loose connection or wiring Call manufacturer or service center
Motor defective Call manufacturer or service center
Blown fuse or tripped circuit breaker Replace fuse or reset circuit breaker
PROBLEM: Dust blowing from vacuum when running
CAUSE SOLUTION
Full paper bag Replace lter bag
Paper lter bag not installed properly Reinstall or replace paper lter bag properly
Cloth lter bag is dirty Clean cloth lter bag
Cloth or paper lter bag is torn Replace

(8) 6-Quart Raven Backpack Vacuum 6-Quart Raven Backpack Vacuum (9)
4.0 Operation and Assembly Instructions
DRY PREPARATION AND OPERATION ONLY! DO NOT USE ON WET
SURFACES.
This vacuum is equipped with an air-thru motor and is designed for dry pickup only.
Unpack the carton and remove the vacuum and attachments (if purchased with tools).
Getting Started:
1. Make sure the on/off switch is in the OFF position.
2. Remove lid and check to make sure you have both a cloth lter bag and paper lter
bag in place. Place lid back onto the vacuum body, tightening securely. Both bags
must be used at all times. Any damage resulting from the lack of using both bags will
VOID your warranty.
3. Wrap the safety power cord around the molded-in cord wrap on the side of the
vacuum. Do not tie or loop the pigtail cord with the extension cord.
4. Loosen the shoulder and waist belt straps and slide vacuum on.
5. Connect and tighten the waist belt making sure the majority of the weight is on your
hips and not your shoulders.
6. Adjust the shoulder straps for comfort.
7. Connect the sternum straps for added support and ideal t.
8. Plug the vacuum into a properly grounded outlet.
9. Turn unit to the ON position and proceed with vacuuming.
10. Always store vacuum, safety power cord and tools in a cool, dry place indoors.
NOTE: The weight of the vacuum should be distributed on your hips. Adjust any strap as
needed for your custom t.
To Change Paper Filter Bag:
1. Unscrew lid and lift lid off of the body.
2. Remove full paper bag from the tank and dispose of
properly.
3. Take new paper lter bag and set inside cloth lter bag,
expanding it to the sides of the cloth lter bag.
4. Place lid back onto the vacuum body, tightening securely.
Cloth Filter Maintenance:
The cloth lter should be inspected and cleaned each time you empty the tank. DO NOT
wash the cloth lter. It could cause shrinkage of the cloth and damage to the gasket.
Simply shake off any dust or loose particles and brush the exposed surface with a soft
bristle brush.
CAUTION: Always exercise caution when handling the vacuum. Dropping the vacuum
could cause permanent damage to the internal components.
4.0 Operation and Assembly Instructions Continued
HEPA Cloth Filter Maintenance:
When the white disk inside your dome lter is discolored, replace it with a new HEPA
lter with bag support. Replacement time frame of the HEPA lter depends on the
frequency and application of use. For best results, replace every six (6) months.
IMPORTANT: Following the instructions above is critical in prolonging the life of your
vacuum. All lters must be used at all times. Failure to do so will VOID your warranty.
Assembly of Attachments:
The vacuum comes assembled, but you will need to install the hose to the wand and the
wand to the attachment.
Wand Assembly (for 2-Piece Wand Only):
• Align the button lock of the upper wand section with the opening
for the button lock on the lower wand section.
• Push the sections together until the button lock slides into place
and the lock is secured.
To Connect Wand to Hose:
• Insert the tapered end of the wand into the swivel cuff at the end
of the hose.
To Connect Wand to Attachments:
• Turn wand nut counterclockwise approximately four (4)
complete turns.
• Insert the tool into the wand and coupling.
• While holding the tool in place, turn nut clockwise until wand
nut is fully locked.