Sanela SPARTAN Installation and operating instructions

Installation
& maintenance
instructions.
SPARTAN

2
splwashrooms.co.nz
General Information
• Designed for indoor use only. Do not expose to elements of nature.
• All plumbing and electrical connection must be made in accordance with
AUS / NZ standards.
Warnings
• Read all instructions before attempting to install this system. It is

• 
solenoid). Solenoid components are susceptible to debris and require

• Consideration should be given to any regulations relating to an air gap,


3
splwashrooms.co.nz
Operating Instructions and Parts Manual
Please read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/
or property damage. Retain instructions for future reference.
Sanela Spartan Sensor Tap
Sensor activated tapware for cold and pre-mixed water. High quality electronics
combined with elegant aesthetics.

Finish
Water Temperature
Power Supply
Control
Operating Voltage
Active Range
Recommended Pressure
Rate of Flow
Water Inlet
Dimensions
Warranty
Stainless Steel construction

available)

Infra-red sensor
24V DC, 3W






24 Months
Planning
• 

• 

maintenance.
• Install the angel valve to enable ease of future maintenance.
Tempered Water
• 


4
splwashrooms.co.nz
Standard Functions
Hex nut
2 Internal solenoid valve
3 Filter
Connection hose
 
7
8
Mounting screw
 
wago connectors to external
power supply adapter
Operating pressure range
Hands within active

Hands removed from
active range, water stops

water will stop
SENSING RANGE
Components


splwashrooms.co.nz
External Power Supply Installation
Input 
Output 24 V DC
IP rating 
Operating
temperature

Rated power 
Important
To be installed in accordance with all NZ electrical regulations. It must be carried out


 Moisture ingress due to plumbing fault
2. Ongoing maintenance and accessibility
The mounting box can be surface mounted or within the service or ceiling cavity.
󰀨 



splwashrooms.co.nz
Drill and insert appropriate wall anchors if required Remove cover from mounting box
Fix mounting box to wall 
via grommet and terminate accordingly
Reinstall cover of mouting box and ensure sealed.
Tighten grommet to ensure snug around cables
Note: Power supply should be secured via current


7
splwashrooms.co.nz
Faucet Installation
Install  Flush lines thoroughly
Fit connection hose to base of faucet
From external power supply

between basin and facet. Pass mounting screw,
hose and electrical connections through vanity
Fit mounting screw into base of faucet




Recommended


8
splwashrooms.co.nz
 

white to white).
Turn angel valve on and check all connections Do not come within active range
Once power turned on, faucet
will automatically adjust



come in active range during
this time.
Turn power supply on.
It is necessary, for the
proper function, to keep
the unit under constant

the power supply unit
behind the switch into the
light circuit)


splwashrooms.co.nz
Important
• 

• The senor of the faucet must not be obstructed.
• 
cause false activation i.e. mirrors opposite faucet. With wall mounted faucets pay
particular attention to the distance between the bottom of the basin and the faucet


• 
accordance with applicable codes and regulations.
Note: If you require to modify any of the factory settings please request the

Activation Range Time Delay Hygienic Flush


splwashrooms.co.nz
Maintenance
• 

• Clean faucet regularly using soapy water and a soft cloth or wet sponge
• DO NOT clean faucet with any abrasive material or chlorine/acid based




splwashrooms.co.nz
Symptom Possible Cause Corrective Action



hands are within
active range?
a. Water supply
b. Water connections
c. Filter is clogged
d. Faulty solenoid
a. Ensure water at source
b. Ensure connections
c. 
and solenoid)
d. Replace solenoid



when hands are
within active
range.
a. Power supply
b. Power connections to

c. IR sensor damaged
d. Faulty IR sensor
a. Ensure power at
source
b. Check all connections
and polarity
c. 
d. Replace IR sensor
Water doesn’t

a. Dirty IR sensor
b. Obstruction in detection

c. Water drop on sensor eye
d. Ghost sensing due to

e. Debris in solenoid
a. Clean IR sensor
b. Remove obstruction
c. Wipe sensor
d. 
surface or reposition
e. Clean and/or replace
solenoid
 a. Filter clogged
b. Aerator clogged
c. Water supply
a. 
b. Clean aerator
c. 
at source
Troubleshooting

splwashrooms.co.nz
Supreme Comprehensive Warranty
Your Supreme sensor tap is fully guaranteed against defective materials and

records), subject to it being installed and maintained in accordance with the
manufacturer’s instructions.



be payable by the customer.

• 
installation guidelines supplied
• Failure to follow manufacturer’s maintenance instructions
• 
- the use of non-authorised parts
- authorised parts not installed in accordance with the manufacturer’s
instructions
- accidental damage, negligent use, misuse, vandalism, neglect

power supply, natural disaster, or insect infestation)
• 
• 
The above includes consequential damage to any other goods, furnishings, or
property.
• 
• This warranty does not displace any statutory warranty in relation to the

will be limited to a replacement or repair of the dispenser or payment of



• Warranty only extends to products purchased and installed in New Zealand.
• Contamination or poor water quality is not covered by product warranty.
• 
is not covered by the product warranty.


New Zealand

󰀩