Santa Fe Connect Instruction Manual

Start Here!
You should have received the following items:
Santa Fe Connect Monitor
Santa Fe Connect Cable (2 Ft.)
Santa Fe Connect Cable (25 Ft.)
Santa Fe Connect Water Sensor
Santa Fe Connect Water Sensor Cable (25 Ft.)
Hanging Screw
1
2
3
4
5
To get started connecting your new dehumidier to the cloud, please follow these simple steps:
Side View
Back
View
Step 1: Plug in and turn on your dehumidier.
Step 2: Choose placement of the Monitor. Position the Monitor onto the
back of your dehumidier. The magnet on the back of the Monitor
will hold it in place, or position the Monitor somewhere within
25 feet of the dehumidier using the hanging screw. DO NOT
place the Monitor on the exhaust grill of the dehumidier.
Step 3: Attach the Santa Fe Connect Cable to the Monitor. Use only one
of the cables provided. Choose your cable based on the length
required to reach the Monitor.
Step 4: Attach the other end of the Santa Fe Connect Cable to your dehumidier.
Step 5: This step is optional. Attach the Water Sensor to the Monitor using
the Water Sensor Cable. Position the Water Sensor onto the floor.
This diagram shows using the
2 Ft. Santa Fe Connect Cable.
6
1
2
3
4
5
6
For further distances, the
25 Ft. Santa Fe Connect
Cable and Hanging
Screw may be used.
TS-1068 4/18 Rev B
Start Here!
You should have received the following items:
Santa Fe Connect Monitor
Santa Fe Connect Cable (2 Ft.)
Santa Fe Connect Cable (25 Ft.)
Santa Fe Connect Water Sensor
Santa Fe Connect Water Sensor Cable (25 Ft.)
Hanging Screw
1
2
3
4
5
To get started connecting your new dehumidier to the cloud, please follow these simple steps:
Side View
Back
View
Step 1: Plug in and turn on your dehumidier.
Step 2: Choose placement of the Monitor. Position the Monitor onto the
back of your dehumidier. The magnet on the back of the Monitor
will hold it in place, or position the Monitor somewhere within
25 feet of the dehumidier using the hanging screw. DO NOT
place the Monitor on the exhaust grill of the dehumidier.
Step 3: Attach the Santa Fe Connect Cable to the Monitor. Use only one
of the cables provided. Choose your cable based on the length
required to reach the Monitor.
Step 4: Attach the other end of the Santa Fe Connect Cable to your dehumidier.
Step 5: This step is optional. Attach the Water Sensor to the Monitor using
the Water Sensor Cable. Position the Water Sensor onto the floor.
This diagram shows using the
2 Ft. Santa Fe Connect Cable.
6
1
2
3
4
5
6
For further distances, the
25 Ft. Santa Fe Connect
Cable and Hanging
Screw may be used.
TS-1068 4/18 Rev B

Step 6: Download the Santa Fe Connect app from
www.Santa-Fe-Products.com/Connect or search
“Santa Fe Connect” on the App Store or Google Play.
Step 7: Launch the Santa Fe Connect app and select Sign Up.
Step 8: Enter your account details and select notication
preferences. Then select Create Account.
Step 9: If this is your rst time installing a dehumidier, follow
the instructions in Image A.
If you are installing your second dehumider, you can choose
the + icon from the side menu, as shown in Image B.
After installing your Santa Fe Connect Monitor using the
instructions on the other side, follow the steps below.
LED Indicators
Blinking Blue: Setup mode (ready to accept new WiFi credentials).
Blinking Green: Connecting to local WiFi network.
Blinking Turquoise: Connecting to Cloud.
Breathing Turquoise (fading in and out): Connected to the Cloud.
CONNECT
For Product Manual and
Troubleshooting Guide, visit
www.Santa-Fe-Products.com/Connect
or call 1-800-533-7533.
Image A Image B
Step 6: Download the Santa Fe Connect app from
www.Santa-Fe-Products.com/Connect or search
“Santa Fe Connect” on the App Store or Google Play.
Step 7: Launch the Santa Fe Connect app and select Sign Up.
Step 8: Enter your account details and select notication
preferences. Then select Create Account.
Step 9: If this is your rst time installing a dehumidier, follow
the instructions in Image A.
If you are installing your second dehumider, you can choose
the + icon from the side menu, as shown in Image B.
After installing your Santa Fe Connect Monitor using the
instructions on the other side, follow the steps below.
LED Indicators
Blinking Blue: Setup mode (ready to accept new WiFi credentials).
Blinking Green: Connecting to local WiFi network.
Blinking Turquoise: Connecting to Cloud.
Breathing Turquoise (fading in and out): Connected to the Cloud.
CONNECT
For Product Manual and
Troubleshooting Guide, visit
www.Santa-Fe-Products.com/Connect
or call 1-800-533-7533.
Image A Image B