SANUS VuePoint F107d User manual

F107d INSTRUCTION MANUAL
Scan for easy install video
san.us/793
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!

2
Unsure?
?
Perfect! Call 1-888-333-9952
Solid concrete or concrete
block - call 1-888-333-9952
Does your TV weigh more than 35 lb (15.9 kg) including accessories?
No
— Perfect!
Yes
— This mount is NOT compatible. Visit vuepoint.sanus.com or call 1-888-333-9952 to find a compatible mount.
35 lb
(15.9 kg)
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
1
2
3
4
What is your wall made of?
Drywall with
wood studs
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at 1-888-333-9952.
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
1/2 in.
(13 mm)
Do you have all of the tools needed? Optional
7/32 in.
(5.5 mm)
Wood
3/8 in.
(10 mm)
Concrete

3
Dimensions
in.
[cm]
SIDEFRONT
TOP
7.9
[20.0]
7.9
[20.0]
7.6
[19.3]
2.9
[7.5]
7.2
[18.3]
4.3
[10.8]
7.9
[20.0]
3.9
[10.0]
3.9
[10.0]
3.0
[7.5]
16º 16º
3.0
[7.5]
2.6
[6.5]
NOTE: TV shifts 4.3 in. (10.8 cm)
to the right or left when in the home
position. Consider this when selecting
the location of your wall mount.

4
M4 x 8mm
M4 x 12mm
M5 x 12mm
M6 x 12mm M6 x 35mm
M5 x 35mm
M4 x 35mm
TV Bracket
TV Screws
TV Bracket
Extenders
TV Bracket
Interface
Screws
03 x8
02 x4
01 x1
04 x4
06 x4
08 x4
10 x4 11 x4 12 x4
05 x4
07 x4
09 x4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
Washers Spacers
M
4
/
M
5
M
6

5
8-32 x 3/8 in.
8-32
5/16 x 2¾ in.
STEP 2 Parts and Hardware STEP 3 Parts and Hardware
Wall Plate Assembly
Wall Plate Template
Lag Bolts
Washer
Cable Ties
Locking Screw
5/16 x 2¾ in.
.695 x .350 x .075 in.
Concrete Installation Kit CMK1 (not included)
x4
x4
x4
.695 x .350 x.075 in.
5/16 x 2¾ in.
Contact Customer Service at 1-888-333-9952 to have
these additional pieces shipped directly to you.
Fischer UX 10 x 60 Anchor
15 x2
16 x1
17 x1
18 x3
13 x1
14 x1

6
x
8mm
STEP 1 Attach TV Bracket to TV
These smaller hole patterns only use TV bracket 01 .
Do not use the four TV bracket extenders 02 and eight screws 03 .
7.5 x 7.5
10.0 x 10.0
01
10.0
10.0
7.5
1-1 Measure Your TV Hole Pattern 1-2 Assemble Your TV Bracket
Determine which TV bracket configuration to use, A, B, or C
based on your TV hole pattern measurements.
cm
inches
02
03
inch dimensions are approximate
75 mm = 7.5 cm ≈ 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7⅞ in.
Measure the width and height of your TV hole
pattern in cm.
Record your measurements:
Width__________cm x Height ________ cm A
7.5

7
Assemble TV bracket extenders 02 onto TV bracket 01 as
illustrated.
Secure using eight screws 03 in the corner holes shown.
B C
20.0 x 20.0
01
20.0
20.0
02
02
02
02
03
Assemble TV bracket extenders 02 onto TV bracket 01 as
illustrated.
Secure using eight screws 03 in the corner holes shown.
20.0 x 10.0
20.0
10.0
01
02
02
02
02
03

8
1-3 Select TV Screw
Diameter 1-4 Select TV Screw Length
Too Short
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-888-333-9952.
M5 M6
FLAT BACK ROUND BACK CABLESINSET HOLES
M4
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Hand thread screws into the
threaded inserts on the back
of your TV to determine which
screw diameter (M4, M5, or
M6) to use.

9
Flat Back
Round Back / Extra Space
1-5 Attach TV Bracket
Position your TV bracket configuration (A or B) over your TV hole pattern - making sure the bracket is centered over the TV hole
pattern and level. Secure bracket using your screw/washer (Flat Back) or spacer/screw/washer (Round Back / Extra Space)
selection.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
12
02
01
TV Bracket
Configuration A
Illustrated
(with spacers)
TV Bracket
Configuration B
Illustrated
(with spacers)
04 06 08
10
10
11
11
NOTE: For 20.0
x 20.0 or 20.0 x 10.0 hole
patterns, you may need to
loosen the screws 03 to
align the bracket extenders
02 .
After bracket extenders
02 are secured to the
back of your TV, re-tighten
screws 03 .
01
03
0905 07

10
STEP 2A Attach Wall Plate - Wood Stud
2 3
13
13
≤ 5/8 in.
(16 mm)
1
3 in.
(75 mm)
7/32 in.
(5.5 mm)
NOTE: TV shifts
4.3 in. (10.8 cm)
to the right or left
when in the home
position. Consider
this when select-
ing the location of
your wall mount.
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to
edge stud finder.
2. Position the wall plate template 13 at your desired height and line up the holes with your stud center line. Level the template
and tape in place.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 13 .
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).

11
15
4. Install wall plate assembly 14 using two lag bolts 15 . Tighten the lag bolts only until they are pulled firmly against the wall
plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall
plate until level. Tighten the bottom lag bolt when adjustments are complete.
15
14
14
4

12
STEP 2B Attach Wall Plate - Solid Concrete / Concrete Block
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate assembly 14 directly onto the concrete surface
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
1. Position the wall plate template 13 on the wall at your desired height. Level the wall plate template and mark the hole
locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
13
13
21
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
10 mm
(3/8 in.)
75 mm
(3 in.)
NOTE: TV shifts 4.3 in.
(10.8 cm) to the right or
left when in the home
position. Consider this
when selecting the loca-
tion of your wall mount.

13
43
3. Remove the wall plate template 13 and insert two anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit
CMK1*).
CAUTION: Be sure the anchors are seated flush with the concrete surface.
4. Install wall plate assembly 14 using two lag bolts and two washers (use only the lag bolts and washers from the Concrete
Installation Kit CMK1*). Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
*Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit CMK1 shipped directly to you.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall
plate until level. Tighten the bottom lag bolt when adjustments are complete (see page 11).
14
*
*
*

14
HEAVY! You may need assistance with this step.
STEP 3 Hang TV onto Wall Plate
1. Hang the TV onto the arm of wall plate assembly 14 by first hooking the top support, then resting the TV into place.
2. Lock the TV to the wall plate assembly 14 with locking screw 16 and washer 17 .
IMPORTANT: This locking screw 16 must be installed to secure the TV onto the wall plate assembly 14 .
14
14
1 2
16
17

15
Manage Cables
Cables can be routed through the cable channel on the top of the arm of the wall plate assembly 14 for a cleaner look.
14
18

16
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the tilt tension
knob by hand.
NOTE: Once your TV is in place, tighten the tilt tension
knob to prevent unwanted movement.
LEVEL ADJUSTMENT
To adjust the leveling of your TV, loosen the locking screw
16
, level your TV, then tighten locking screw
16
.
IMPORTANT: This locking screw
16
must be installed to
secure the TV onto the wall plate assembly
14
.
L
o
o
s
e
n
T
i
g
h
t
e
n
Tilt Tension Knob
L
o
o
s
e
n
T
i
g
h
t
e
n
16
14

17
REMOVING THE TV
To remove your TV from the wall plate assembly 14 , disconnect all cables and then reverse the procedures in STEP 3.
14
HEAVY! You may need
assistance with this step.

18
Features
20.0
20.0 10.07. 5
10.0
7. 5
TV bracket can be
configured to fit TV hole
patterns from 7.5 x 7.5 cm
up to 20.0 x 20.0 cm

19
TV tilts up or down for the
perfect viewing angle
Fully articulating arm
creates 2-point movement
for optimal viewing position
Cable channel
holds cables
along mount arm
for a clean look
Adjustments allow fingertip control
of TV or restriction of TV movement
Level
adjustments
create a
worry-free
installation

20
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
¿Su televisor pesa más de 15.9 kg (35 libras), incluidos los accesorios?
No — ¡Perfecto!
Sí
— Este soporte NO es compatible. Visite Vuepoint.Sanus.com o llame al 1-888-333-9952 para encontrar un soporte compatible.
(15.9 kg)
35 libras
¿Listo para comenzar?
Lea estas instrucciones en su totalidad para estar seguro de sentirse cómodo con este fácil proceso de instalación. Consulte también
el manual del usuario de su televisor para ver si existe algún requisito especial para instalar su televisor en la pared.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto,
contáctese con el servicio de atención al cliente al 1-888-333-9952.
Antes de comenzar, verifiquemos que este soporte sea perfecto para usted.
1
2
3
4
PRECAUCIÓN: Evite lesiones y daños materiales.
●Este producto está diseñado para ser instalado en paredes con montantes de madera. NO lo instale en una pared de yeso
únicamente.
●La pared debe soportar cinco veces el peso del televisor y del soporte juntos.
●No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por el fabricante.
●El fabricante no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o del uso indebido.
¿Tiene todas las herramientas necesarias?
1/2"
(13 mm)
Opcional
7/32"
(5.5 mm)
Madera
3/8"
(10 mm)
Hormigón
¿De qué está hecha su pared?
¿No está seguro? Llame al
1-888-333-9952
?
¡Perfecto!
Tabiques de yeso
con montantes de
madera
Hormigón sólido o bloques
de cemento - llame al
1-888-333-9952