Sanus FSF207 User manual

FSF207 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
Scan for easy install video
san.us/1125

2
1 Does your TV weigh more than 25 lbs. (11.3 kg) including accessories?
No — Perfect!
Yes — This mount is NOT compatible. Visit vuepoint.sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a
compatible mount.
2 What is
your wall
made of?
3 Do you
have all
the tools
needed?
4 Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
CAUTION: Avoid potential personal injuries and property damage!
●This product is includes directions for use in wood stud, solid concrete, concrete block, and steel stud walls - DO NOT install
into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
25 lbs.
(11.3 kg)
Perfect!
CAUTION:
DO NOT install
into drywall
alone
Wood Stud Install
Concrete Install
Steel Stud Install
Tape
Measure Pencil Level Screw
driver
Electric
Drill
Socket
Wrench
Stud
Finder Awl Wood
Drill Bit
Masonry
Drill Bit Hammer Steel
Drill Bit
7/32 in.
(5.5 mm)
1/2 in.
(13 mm) 3/8 in.
(10 mm)
1/2 in.
(13 mm)
Before getting started, let’s make sure this mount is perfect for you!
Drywall
with wood
studs?
Solid
concrete
or concrete
block?
Concrete kit required (not included)
Unsure?
?
Call Customer Service:
1-800-359-5520
(UK: 0800-056-2853)
Drywall
with
steel
studs?
Steel stud kit required (not included)

3
3.94in
100mm
7.87in
200mm
7.87in
200mm
.35in
8.8mm
.33in
8.4mm
2.56in
65mm
7.19in
182.6mm
1.14in
29.1mm
4.90in
124.5mm
8.80in
223.6mm
8.80in
223.6mm
10.26in
260.5mm
ESTIMATED 32" TV
30deg 30deg
4.27in
108.6mm
9.96in
252.9mm
7.59in
192.7mm
3.31in
84.1mm
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
Dimensions
NOTE: TV shifts 4.27 in. (108.6 mm) to
the right or left when in the home position.
Consider this when selecting the location of
your wall mount.

4
M4 x 8mm
M4/M5 M6/M8
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M8 x 20mm
M8 x 16mm
M8 x 35mm
STEP 1 Parts and Hardware
22mm
TV Bracket
TV Screws
TV Bracket
Extenders
TV Bracket Interface
Screws
STEP 1 Attach Bracket to TV
Washers Spacers
03 x8
04 x4
05 x4
06 x4
07 x4
11 x4 12 x4 13 x4
08 x4
09 x4
10 x4
01 x1
02 x4
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return
the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.

5
STEP 2 Parts and Hardware STEP 3 Hardware
Wall Plate Assembly
Wall Plate Template
8-32 x 3/8 in.
Locking Screw
18 x1
15 x1
14 x1
Lag Bolts
16 x2
5/16 x 2¾ in.
17 x2
8-32
Washer
19 x1
Lag Bolt Washer
Cable Ties
20 x3
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
Model: FSF207
6700-004862<00>
THIS WAY UP

6
1/4-20 SnapToggle BB
Lag Bolts
Washer
Fischer UX 10 x 60R
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
.695 x .350 x.075 in.
Lag
Bolts
5/16 x 2¾ in.
S1 x2
C2 x2
C3 x2
C1
x2
S2 x2
S3 x2
Hardware for STEP 2C Steel Stud Installation
[Steel Stud Anchor Kit is NOT INCLUDED]
Hardware for STEP 2B Concrete Installation
[CMK2 Kit is NOT INCLUDED]
Contact Customer Service at 1-800-359-5520 to have these
additional pieces shipped directly to you.
Contact Customer Service at 1-800-359-5520 to have these
additional pieces shipped directly to you.
Anchor
Washer
.734 x .312 x .065 in
Screw
1/4-20 x 1.75

7
Blank Page

8
x
8mm
STEP 1 Attach TV Bracket to TV
These smaller hole patterns only use TV bracket 01 .
Do not use the four TV bracket extenders 02 and eight screws 03 .
7.5 x 7.5
10.0 x 10.0
01
10.0
10.0
7.5
1-1 Measure Your TV Hole Pattern 1-2 Assemble Your TV Bracket
Determine which TV bracket configuration to use, A, B, or C
based on your TV hole pattern measurements.
cm
inches
02
03
inch dimensions are approximate
75 mm = 7.5 cm ≈ 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7⅞ in.
Measure the width and height of your TV hole
pattern in cm.
Record your measurements:
Width__________cm x Height ________ cm A
7.5

9
Assemble TV bracket extenders 02 onto TV bracket 01 as
illustrated.
Secure using eight screws 03 in the corner holes shown.
B C
20.0 x 20.0
01
20.0
20.0
02
02
02
02
03
Assemble TV bracket extenders 02 onto TV bracket 01 as
illustrated.
Secure using eight screws 03 in the corner holes shown.
20.0 x 10.0
20.0
10.0
01
02
02
02
02
03

10
1-3 Select TV Screw
Diameter 1-4 Select TV Screw Length
Too Short
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-800-359-5520.
M6 M8
FLAT BACK ROUND BACK CABLESINSET HOLES
M4
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Hand thread screws into the
threaded inserts on the back
of your TV to determine which
screw diameter (M4, M6, or
M8) to use.

11
Flat Back
1-5 Attach TV Bracket
TV Bracket
Configuration A
Illustrated
(with spacers)
TV Bracket
Configuration B
Illustrated
(with spacers)
NOTE: For 20.0
x 20.0 or 20.0 x 10.0 hole
patterns, you may need to
loosen the screws 03 to
align the bracket extenders
02 .
After bracket extenders
02 are secured to the
back of your TV, re-tighten
screws 03 .
02
01
01
Round Back / Extra Space
04
13
11 12
08 09 10
11 12
05 06 07
Position your TV bracket configuration (A, B, or C) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and
level.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough
to secure the TV bracket to the TV. DO NOT overtighten the screws.
IMPORTANT:Ensure TV bracket is securely fastened before moving on to the next step.

12
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
Model: FSF207
6700-004862<00>
THIS WAY UP
2
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
Model: FSF207
6700-004862<00>
THIS WAY UP
3
Model: FSF207
6700-004862<00>
14 14
≤ 5/8 in.
(16 mm)
1
3 in.
(75 mm)
7/32 in.
(5.5 mm)
NOTE: TV shifts
4.27 in. (108.6 mm)
to the right or left
when in the home
position. Consider
this when select-
ing the location of
your wall mount.
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to
edge stud finder.
2. Position the wall template 14 at your desired height and line up the holes with your stud center line. Level the template and
tape in place.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 14 .
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).

13
17
16
16
15
15
4
4. Install wall plate assembly 15 using two lag bolts 16 and two washers 17 . Tighten the lag bolts only until they are pulled
firmly against the wall plate.
NOTE:If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the
wall plate until level. Tighten the bottom lag bolt when adjustments are complete.
CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate 15 .Ensure the wall plate is securely fastened to the wall before continuing on to the
next step.

14
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate assembly 15 directly onto the concrete surface
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
1. Position the wall plate template 14 on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
Model: FSF207
6700-004862<00>
THIS WAYUP
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
Model: FSF207
6700-004862<00>
THIS WAY UP
Model: FSF207
6700-004862<00
>
14 14
21
10 mm
(3/8 in.)
75 mm
(3 in.)
NOTE: TV shifts 4.27 in.
(108.6 mm) to the right
or left when in the home
position. Consider this
when selecting the loca-
tion of your wall mount.
Concrete Installation Kit CMK2 is not
included (see page 6) Contact Customer
Service at 1-888-333-9952 to have the
additional hardware shipped directly to you.
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option

15
43
3. Remove the wall plate template 14 and insert two anchors C1 (Fischer UX 10 x 60 - included in the Concrete Installation Kit*see page 6).
CAUTION: Be sure the anchors C1 are seated flush with the concrete surface.
4. Install wall plate 15 using two lag bolts C3 and two washers C2 (use only the lag bolts and washers from the Concrete
Installation Kit*). Tighten the lag bolts C3 only until the washers C2 are pulled firmly against the wall plate.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt C3 and shifting
the wall plate until level. Tighten the bottom lag bolt C3 when adjustments are complete (see page 13).
CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate 15 .Ensure the wall plate is securely fastened to the wall before continuing on to the
next step.
15
C1
C2C3

16
CAUTION: Avoid potential personal
injuries and property damage!
●Studs must be at least 2x4 in. / 25 ga.
●Stud type and structural strength must
conform to the North American Specification
for the Design of Cold-Formed Steel
Structural Members
[362 S 125 18, C-Shape, S - Stud Section].
●If back side of wall is unfinished, drywall must be
installed to a minimum of one stud left and right
of the stud(s) being used to install the mount.
●Drywall must be a minimum of 1/2 in. (13 mm)
thick on each side of the studs, and a minimum
clearance of 1⅞ in. (48 mm)
behind the wall is required.
●Drywall must be secured to studs with
screws 12 in. (304.8 mm) on center.
●This product must be centered on the studs.
HERE WE GO!
Scan here to view
your install video.
san.us/1125
We're here to help! If you have questions at any point,
contact customer service at 1-888-333-9952.
THIS IS YOUR DRILLING
TEMPLATE FOR STEP 2
YOU’RE REALLY GOING
TO ENJOY STEP 3
GET STARTED
WITH STEP 1
Grab the TV bracket and line
it up with the holes on the
back of your TV.
Attach using the bolts that fit.
Locate your stud and choose a
height for your TV. Then
simply tape this template to
the wall and drill right through.
Once the wall plate is secured,
simply hang TV on arm and secure
into place with safety screw.
Congratulations! You’re done.
WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT
.
.
A
Y UP
Min.
1/2 in.
(13 mm)
12
1. Locate stud.
2. Level the wall plate template 14 and mark the hole locations.
Steel Stud Anchor Kit SSMK1 is not included (see page 6) Contact
Customer Service at 1-888-333-9952 to have the additional hardware
shipped directly to you.
14
STEP 2C Attach Wall Plate to Wall Steel Stud Installation

17
25 mm
(1 in.)
13 mm
(1/2 in.)
34
3. Drill pilot holes as illustrated.
4. Fold metal channel of anchor S1 until it is flat with the plastic straps and slide the metal channel into the drilled hole.
S1

18
56
5. Hold the plastic straps of anchor S1 by the end and pull towards you until the metal channel is flush behind the drywall.
6. Slide the plastic cap down the straps and into the hole with the lip of the cap flush against the wall.
S1
S1

19
7
8
7. Bend the straps up and down until they snap off level with the lip of the cap.
CAUTION: Be sure the cap is seated against the drywall surface and the ends of the anchor do not extend beyond the cap - cut if
neccessary.
8. Install wall plate assembly
15
using two screws
S2
and
two washers
S3
. Tighten the screws only until they are
pulled firmly against the wall plate.
NOTE: If needed, you can make small level
adjustments to the wall plate by loosening the bottom lag bolt
and shifting the wall plate until level. Tighten the bottom lag
bolt when adjustments are complete (see page 13).
CAUTION: Avoid potential personal injury or property
damage! All screws MUST BE firmly tightened to prevent
unwanted movement of the wall plate
15
.Ensure the wall
plate is securely fastened to the wall before continuing on
to the next step.
S1
S3
S2
S1
15

20
HEAVY! You may need assistance with this step.
STEP 3 Hang TV onto Wall Plate
1. Hang the TV onto the arm of wall plate assembly 15 by first hooking the top support, then resting the TV into place.
2. Lock the TV to the wall plate assembly 15 with locking screw 18 and washer 19 .
CAUTION! This locking screw 18 must be installed to secure the TV onto the wall plate assembly 15 .
15
15
55
1 2
18
19