Sanus SLF9 User manual

Scan for easy install video
http://san.us/1043
SLF 9 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-1376 (UK: 0800-056-2853). We’re ready to help!

2
No — Perfect!
Yes — This mount is NOT compatible. Visit simplicity.sanus.com or call 1-888-333-1376
(UK: 0800-056-2853) to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-1376 (UK: 0800-056-2853).
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
150 lbs.
(68 kg)
Ready to begin?
Does yourTV
(including accessories)
weigh more than
150 lbs. (68 kg)?
CAUTION:
DO NOT install
into drywall alone
Unsure?
Drywall with
wood studs?
Solid concrete or
concrete block?
Call Customer Service:
1-888-333-1376 (UK: 0800-056-2853)
Perfect! Perfect!
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Para Español ver página 26
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!

3
Features
TV tilts up
or down for
the perfect
viewing angle
Cable covers hold cables
along mount arm for a
clean look
Adjustment knob allows fingertip
control of TV or restriction of TV
movement
Mounting arm adjusts* within the
wall plate for optimal positioning
Level
adjustment
creates a
worry-free
installation
Fully articulating arm with
3 pivot points, creates
optimal viewing positions
Fit TV VESA hole
patterns from
75 x 75 mm up to
600 x 400 mm
* CAUTION: Avoid potential personal injury or property damage!
For concrete applications, the arm assembly must remain centered in the wall plate.

4
MIN SWIVEL WITH 90" TV
OFFSET RANGE
FULLY ASSEMBLED MOUNT LEVELING
TOP VIEW - EXTENDED
TOP VIEW - COLLAPSED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D VIEW
TV INTERFACE
WALL PLATE
15.75 in
[400mm]
15.75 in
[400mm]
3.9 in
[100mm]
3.9 in
[100mm]
3.0 in
[750 mm]
2.95 in
[750 mm]
7.87 in
[200 mm]
7.87 in
[200 mm]
23.62 in
[600mm]
8.7 in
[220 mm]
17.3 in
[440 mm]
3.19 in
[80.9 mm]
3.46 in
[87.8 mm]
24.05 in
[611 mm]
5˚
35˚35˚
4˚
UP
15˚
DOWN
2.5˚
16 in
[406 mm]
24 in
[610 mm]
28.51 in
[724.1 mm]
21.65 in
[549.9 mm]
10.9 in
[277 mm]
13.7 in
[347 mm]
Dimensions

5
HERE WE GO!
Scan he re to view
your install video.
Model: SLF8-B1
6700-004620 <00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
If you have questions at any point, contact customer service at:
1-888-333-1376
Monday – Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101 cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are
included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
STEP 1 Attach Bracket to TV
02 x4
04 x4
05 x4
06 x4
07 x4
08 x4
09 x4
10 x4
11 x4
12 x4
13 x4
14 x4
15 x4 16 x4
17 x4
18 x4
03 x8
01
x1
TV Bracket
TV Bracket
Extenders
Interface Screws
(TV Bracket)
TV Screws Washers
Spacers

6
1.1 Measure Your TV Hole Pattern
inch dimensions are approximate
75 mm =7.5 cm ≈ 3 in.
100 mm=10 cm ≈ 4 in.
200 mm=20 cm ≈ 7 7/8 in.
300 mm=30 cm ≈ 11 3/4 in.
400 mm=40 cm ≈ 15 3/4 in.
600 mm=60 cm ≈ 23 5/8 in.
Measure the width and height of your TV hole pattern in mm.
Record your measurements for STEP 1.2.
Width _____________ mm X Height _____________ mm
cm
inches
H
W

7
1.2 Assemble Your TV Bracket
Based on your TV hole pattern measurements
from STEP 1.1 (Wmm x Hmm), determine your
TV bracket configuration: A, B, C, D, E or F.
A
7.87
[200]
15.75
[400] 15.75
[400]
11.81
[300]
11.81
[300]
15.75
[400]
11.81
[300]
2.95
[75]
in.
[mm]
in.
[mm] in. [mm]
300 x 300 mm
400 x 400 mm 400 x 300 mm
B C
These smaller hole patterns only use TV
bracket 01 . Do not use the four TV bracket
extenders 02 and eight screws 03 .
75 x 75 mm
100 x 100 mm
200 X 200 mm
02
03
2.95
[75]
3.94
[100]
7.87
[200]
3.94
[100]
03
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
0202
01
0202
01
01
03

8
03
in.
[mm] in. [mm] in. [mm]
600 x 400 mm
D
400 x 200 mm 200 x 400 mm
E F
03 03
15.75
[400]
15.75
[400]
7.87
[200]
23.62
[600]
15.75
[400]
7.87
[200]
01
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
01
02
02
0202
0202
01

9
M4
M6
M8 FLAT BACK ROUND BACK INSET HOLES CABLES
1.3 TV Screw Diameter
1.4 TV Screw Length
b:Spacers and longer screws are
supplied to accommodate:
●Round (irregular) back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Hand thread screws into the
threaded inserts on the back of
your TV to determine which screw
diameter (M4, M6, or M8) to use.
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
a:If your TV has a
flat back AND you
want your TV closer
to the wall, use the
shorter screws.
ab14 15
If your TV included
inset spacers or wall mount
adapters, see Troubleshooting
on
PAGE 25.

10
Position your TV bracket configuration (A, B, C, D, E or F) onto your TV, making sure the bracket is both centered and level over your TV hole pattern.
NOTE: The hanging tab Hon TV bracket 01 must be oriented toward the top of the TV.
Secure the TV bracket using your selection: (a) screw/washer or (b) screw/washer/spacer.
CAUTION: Avoid potential personal injuries and property damage!
DO NOT use a power screwdriver for this step.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
1.5 Attach TV Bracket
TV Bracket Configuration A
Illustrated (with spacers 18 )
TV Bracket Configuration D
Illustrated (with spacers 18 )
HaFlat Back
bRound Back / Extra Space
01
02
01
01
Standard configurations are shown.
For special applications, or if you are uncertain
about your hardware selection, contact
Customer Service at 1-888-333-1376.
17 15 16
10
04
15 16
04 05 06 07 08 09
18
11 12 13 14

11
HERE WE GO!
Scan he re to view
your install video.
Model: SLF8-B1
6700-004620 <00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
If you have questions at any point, contact customer service at:
1-888-333-1376
Monday – Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101 cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
Parts and Hardware for STEP 2
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
Fischer UX10 x 60R
Wall Plate
Wall Plate Template Lag Bolts
Lag Bolt Washers
19 x1
20 x1
21 x6
22 x6
23 x6
STEP 2 Attach Wall Plate to Wall

12
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1 ½ x 3 ½ in. (38 x 89 mm)
●Minimum horizontal space between fasteners: 16 in. (406 mm)
●Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing
1. Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder.
2. Level the wall plate template 19 and mark the hole locations in the center of the studs.
HERE WE GO!
Scanhe re to view
yourinstall video.
Model:SLF8-B1
6700-004620<00>
Locateyour studs and choose a height for your
TV,then simply tape this template to the wall,
andyou can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Oncethe wall plate is installed, attach the arm to the
wallplate. Next, simply pick-up your TV, hang it on the
arm,and secure it. Congratulations! You’re done.
We're here to help!
Ifyou have questions at any point, contact customer service at:
1-888-333-1376
Monday–Friday 8
AM
–9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
Fromyour typical viewing location, position your TV so
youreyes are level with the middle of the screen. For most
people,this is between 40 "and 60 " (101 cm and 152 cm)
abovethe floor. For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grabthe TV brackets and line them up
withthe holes on the back of your TV.
Attachusing the bolts that fit.
Referencethe product manual for
detailson mounting to concrete.
Besure to review the manual for
completesafety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
12
NOTE: For assistance in
determining wall plate location, try our
HeightFinder™at Simplicity.Sanus.com
Min. 16 in.
(406 mm)
Max.
5/8 in.
(16 mm)
STEP 2A Wood Stud Installation
UP ARROW
19

13
HERE WE GO!
Scanhereto view
yourinstall video.
Model:SLF8-B1
6700-004620<00>
Locateyour studs and choose a height for your
TV,then simply tape this template to the wall,
andyou can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLYGOING
TO ENJOY STEP 3
Oncethewallplate is installed,attach the armto the
wallplate. Next, simply pick-up your TV, hang iton the
arm,and secure it. Congratulations! You’re done.
We're here to help!
Ifyou have questions atanypoint, contact customer service at:
1-888-333-1376
Monday– Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
Fromyour typical viewing location, position yourTV so
youreyes arelevel with the middle of the screen. For most
people,this is between 40"and 60 " (101 cm and 152 cm)
abovethe floor. For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grabthe TV brackets and line them up
withthe holes on the back of your TV.
Attachusing the bolts that fit.
Referencethe productmanual for
detailson mounting to concrete.
Besure to review the manualfor
completesafety instructions.
40–60 in.
101– 152 cm
10°
10°
THISWAYUP
3 4
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit, then remove the wall plate template 19 .
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 1/2 in. (89 mm).
4. Install the wall plate 20 using four lag bolts 21 and four washers 22 . Tighten all lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Avoid potential personal injury or property damage! All four lag bolts 21 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 20 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 16.
20
19
3½ in. (89 mm)
7/32 in.
(5.5 mm)
21
22
UP ARROW

14
HERE WE GO!
Scanhe re to view
yourinstall video.
Model:SLF8-B1
6700-004620<00>
Locateyour studs and choose a height for your
TV,then simply tape this template to the wall,
andyou can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLYGOING
TO ENJOY STEP 3
Oncethe wall plate is installed, attach the arm to the
wallplate. Next, simply pick-up your TV, hang it on the
arm,and secure it. Congratulations! You’re done.
We're here to help!
Ifyou have questions at any point, contact customer service at:
1-888-333-1376
Monday– Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
Fromyour typical viewing location, position your TV so
youreyes are level with the middle of the screen. For most
people,this is between 40 " and 60 " (101cm and 152 cm)
abovethe floor. For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grabthe TV brackets and line them up
withthe holes on the back of your TV.
Attachusing the bolts that fit.
Referencethe product manual for
detailson mounting to concrete.
Besure to review the manual for
completesafety instructions.
40– 60 in.
101– 152 cm
10°
10°
THISWAY UP
Min. 24 in.
(610 mm)
Min. 24 in.
(610 mm)
Min. 16 in.
(406 mm)
1
HERE WE GO!
Scanhe re to view
yourinstall video.
Model:SLF8-B1
6700-004620<00>
Locateyour studs and choose a height for your
TV,thensimply tape this template to the wall,
andyou can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLYGOING
TO ENJOY STEP 3
Oncethe wall plate is installed, attach the arm to the
wallplate. Next, simply pick-up your TV,hang it on the
arm,and secure it. Congratulations! You’redone.
We're here to help!
Ifyou have questions at any point, contact customer service at:
1-888-333-1376
Monday– Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
Fromyour typical viewing location, position your TV so
youreyes are level with the middle of the screen. For most
people,this is between 40 " and 60 " (101 cm and 152 cm)
abovethe floor. For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grabthe TV brackets and line them up
withthe holes on the back of your TV.
Attachusing the bolts that fit.
Referencethe product manual for
detailson mounting to concrete.
Besure to review the manual for
completesafety instructions.
40–60 in.
101–152 cm
10°
10°
THISWAY UP
2
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate 20 directly onto the concrete surface
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
●Minimum horizontal space between fasteners: 24 in. (610 mm) bottom / 16 in. (406 mm) top
●For concrete applications, the base of the arm 24 (STEP 3) must remain centered in the wall plate 20 . Keep this in mind when selecting the
wall plate 20 location.
1. Level the wall plate template 19 and mark the hole locations (two on the bottom, four on top).
2. Drill pilot holes into solid concrete, using a 3/8 in. (10 mm) diameter drill bit. Never drill into the mortar between blocks.
IMPORTANT: Pilot holes must be drilled to a depth of 4 in. (101 mm).
3/8 in.
(10 mm)
4 in. (101 mm)
19
002862.eps
NOTE: For assistance in
determining wall plate location, try our
HeightFinder™at Simplicity.Sanus.com
STEP 2B Solid Concrete or Concrete Block Installation
19
UP ARROW

15
3 4
3. Remove the wall plate template 19 and insert six concrete anchors 23 (two on the bottom, four on top).
CAUTION: Be sure the anchors are seated flush with the concrete surface.
4. Install the wall plate 20 using six lag bolts 21 and six washers 22 (two on the bottom, four on top). Tighten all lag bolts only until they
are pulled firmly against the wall plate.
CAUTION: Avoid potential personal injury or property damage! All six lag bolts 21 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 20 . Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
20
21
22
Solid Concrete or Concrete Block Installation
UP ARROW
23

16
STEP 3 Attach TV to Wall Plate
HERE WE GO!
Scan her e to view
your install video.
Model:SLF8-B1
6700-004620<00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
Ifyou have questions at any point, contact customer service at:
1-888-333-1376
Monday– Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
HERE WE GO!
Scan he re to view
your install video.
Model: SLF8-B1
6700-004620 <00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
If you have questions at any point, contact customer service at:
1-888-333-1376
Monday – Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101 cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
HERE WE GO!
Scan he re to view
your install video.
Model: SLF8-B1
6700-004620 <00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
If you have questions at any point, contact customer service at:
1-888-333-1376
Monday – Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101 cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
HERE WE GO!
Scan he re to view
your install video.
Model: SLF8-B1
6700-004620 <00>
Locate your studs and choose a height for your
TV,then simply tape this template to the wall,
and you can drill right through.
san.us/969
san.us/971
THIS IS YOUR DRILLING TEMPLATE
FOR STEP 2
WELCOME AND THANKS FOR CHOOSING SANUS SIMPLICITY
YOU’RE REALLY GOING
TO ENJOY STEP 3
Once the wall plate is installed, attach the arm to the
wall plate. Next, simply pick-up your TV,hang it on the
arm, and secure it. Congratulations! You’redone.
We're here to help!
If you have questions at any point, contact customer service at:
1-888-333-1376
Monday – Friday 8
AM
– 9
PM
CST
Saturday– Sunday 10:30
AM
– 7
PM
CST
From your typical viewing location, position your TV so
your eyes are level with the middle of the screen. For most
people, this is between 40 " and 60 " (101 cm and 152 cm)
above the floor.For precise drilling locations, scan the
HeightWizard
™
link below or contact customer service.
GET STARTED
WITH STEP 1 VIEWING HEIGHT
RECOMMENDATION
Grab the TV brackets and line them up
with the holes on the back of your TV.
Attach using the bolts that fit.
Reference the product manual for
details on mounting to concrete.
Be sure to review the manual for
complete safety instructions.
40– 60 in.
101– 152 cm
10°
10°
THIS WAYUP
5/16 x 3 1/2 in.
M4 M6/M8
22mm
M8 X 12 mm
.890 x .375 x .077 in.
.563 x .266 x .050 in.
1/4-20 x 3/8 in.
1/4-20 x 5/8 in.
M4 x 12mm
M6 x 12mm
M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 25mm
M8 x 20mm
3/16 in.
2.5mm
M8 x 45mm
M8 x 50mm
Parts and Hardware for STEP 3.1 Hardware for STEP 3.2
Parts for STEP 3.3
Parts and Hardware for STEP 3.4
Arm Assembly
Wall Plate Screws
and Washers
Locking Screw
Cable Covers
Cover Plates
Hex Key
24 x1
25 x4 26 x4
30 x1
31 x2
27
x1
28 x2
29 x2

17
1
3.1 Attach Arm Assembly to Wall Plate
1. Position the arm assembly
24
on the wall plate
20
by tilting the top into the wall plate channel
C
, then rotating the bottom toward the wall.
CAUTION: Avoid potential injury or property damage! For concrete applications, the base of the arm
24
must remain centered in the wall plate
20
.
NOTE: When mounting to wood stud walls, arm assembly
24
can be adjusted within the wall plate
20
for optimal positioning.
C
24
20
24
20
UP ARROW

18
23
2. Secure with four wall plate screws 25 and four washers 26 using hex key 30 .
CAUTION: Avoid potential personal injury or property damage! Screws 25 and washers 26 must be installed to secure arm assembly
21 to wall plate 20 .
3. Pull arm assembly 24 to full extension.
25
26
30
20
20
24
24

19
HEAVY! You may need assistance with this step.
3.2 Attach TV to Arm Assembly
2
24
27
30
1
1. Hang the TV onto the arm assembly 24 by first hooking the hang tab H, then resting the TV into place.
2. Lock the TV to the arm assembly 24 with locking screw 27 using hex key 30 .
CAUTION: Avoid potential personal injury or property damage! Locking screw 27 must be installed to secure the TV to the arm assembly 24 .
H
24

20
Fit cables inside of cable covers 28 and 29 ., then install cable covers 28 and 29 onto arms 24 .
IMPORTANT: Fully extend arm 24 to ensure you have enough slack in the cables during operation.
3.3 Manage Cables
28
29
29
28
SIDE VIEW
SIDE VIEW
24
29
28