Sanus BXF230 User manual

BXF 230
INSTRUCTION MANUAL
GET IT
RIGHT
THE FIRST TIME
Follow this step-by-step
instruction manual to
speed up your installation.
WE’RE HERE TO HELP
Get it right the first time.
HeightFinder™ shows you
where to drill.
Check it out at:
SANUS.com/1172
Want to watch a video that
shows how easy this DIY
project will be?
Watch it now at:
SANUS.com/2814
Our US-based install experts
are standing by to help.
Call us at:
800-359-5520
Or, chat at:
SANUS.com/chatSP
Texto en español, página 13

2
TV Weight Limit
(including accessories)
DO NOT EXCEED
If your TV, plus accessories, weighs MORE
than indicated, this mount is NOT compatible.
Visit SANUS.com or call customer service to
find a compatible mount.
Call Customer Service
Tools
Needed
Wall
Construction
ONLY install on
these acceptable
wall types.
Unsure
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service.
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.
—DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
●This product is designed for INDOOR USE ONLY.
●The wall must be capable of supporting five times the weight of the TV and mount combined.
●Do not use this product for any purpose not explicitly specified by manufacturer.
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
175 lbs.
(79.3 kg)
Drywall alone
will NOT hold
the weight of
your TV.
wood studs Solid concrete or
concrete block
ACCEPTABLE ACCEPTABLE
CAUTION:
DO NOT install
in drywall alone
Wood Stud
Install
Concrete
Install
Awl
Pencil Level Tape
Stud
Finder
ScrewdriverTape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill
Hammer
1/2 in.
(13 mm)
Socket
Wrench
Drill Bit
3/8 in.
(10 mm)
Concrete

3
BEFOREYOU BEGIN
Remove the stand from
your TV —if attached. Install any accessories you may have purchased, if they requireTV removal
prior to assembly. Note that the TV is
removable for future accessory purchases.
Soft clean surface
Protect the face of your TV
when laying it down for installation.
DIMENSIONS IN. [MM]
Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, “Legrand ”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information
contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this
document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes
no responsibility for accuracy, completeness or suciency of the information contained in this document.
15.75in
400mm
MAX
23.62in
600mm
MAX
7.87in
200mm
MIN
7.87in
200mm
MIN
36.53in
927.7mm
21.83in
554.6mm
23.26in
590.8mm
18.75in
476.2mm
15.76in
400.4mm
2.36in
60mm
16.00in
406.4mm
24.00in
609.6mm
0.36in
9.1mm
12.95in
329mm
22.03in
559.6mm
36.77in
934.1mm
55deg
30.31in
769.9mm
5deg UP
15deg DOWN
2.45in
62.3mm
SIMULATED 75"
FLAT SCREEN TV
TV INTERFACE
WALL PLATE TOP VIEW - EXTENDED
3-D
SIDE VIEW - EXTENDED
SIDE VIEW RETRACTED TOP VIEW - RETRACTED FULLY ASSEMBLED MOUNT

4
ATTACH TV BRACKET TO TVSTEP 1
1.1 Select TV
Screw Diameter 1.2 Select TV Screw Length / Spacers
03
04
04
02
02 01
01
Too Short Too Long Correct
Inset Holes Cables Rounded Back
Only one screw size fits your TV.
M6 M8
• Flat Back TV
[TV brackets
lay flat on your TV]
NO SPACER SPACER NEEDED
• Flat Back TV with
Extra Space Needed
[for deep inset holes
or cable interference]
• Rounded or
Irregular Back TV
[TV brackets NOT
resting flat on your TV]
A B
Use short TV screws 01 .
Spacers 03 not needed. Use long TV screws 01 and spacers 03 to
create extra space between the TV and TV bracket.
01
CAUTION: Verify adequate thread
engagement with your screw 01 , washer 02 ,
spacer 03 combination AND TV bracket 04 .
—Too short will not hold your TV.
—Too long will damage your TV.
NOTE: If your TV
included inset spacers or
adapters, use them UNDER
the mount hardware.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included
and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
M8 x 25mm
M6 x 12mm M6 x 20mm
M8 x 40mm
M8 x 50mm
M8 x 35mm
M8 x 16mm M8 x 20mm
M8 x 30 mm
2.5mm
5mm
22mm
M6 x 35mm
Parts and Hardware for STEP 1
TV Screws
(qty. 4 each) [Only one size fits your TV] Washers
(qty. 4 each)
Spacers
[If necessary]
(qty. 4 each)
0302
01
M6/M8 M6/M8
M6
M8
(qty. 1)
04
TV Bracket
MOUNTING TABS
(ATTACHED)
M
RELEASE
CORD
(ATTACHED)
Screws
(ATTACHED)
R
B

5
1.3 Attach TV Bracket Assembly to TV
1PREP TV BRACKET 2ALIGN WITH TV HOLES
4CENTER ON TV
04
04
04
6TIGHTEN ALL SCREWS
5SECURE TV BRACKET
4X
04
3LOOSELY ASSEMBLE
01
02
NO SPACER
A
4X
B
B
B
SPACER NEEDED
B
02 01
03
04
NOTE: 400 x 400 hole patterns can skip to 3 below.
NOTE: The horizontal arms (and tabs M)
can be reversed top/bottom, if neeeded to
fit non-standard hole patterns.
REMOVE
LOOSEN
MM
M M
4X
4X
01
04
B

6
ATTACH WALL PLATE TO WALL
STEP 2
Fischer UX10 x 60R
5/16 in. x 3½ in.
07
05
06 08
Parts and Hardware for STEP 2
Lag Bolt
Wall Plate
Wall Plate
Template
Concrete Anchor
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
Cover Plate
(Attached)
P
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;
contact Customer Service. Never use damaged parts!
For WOOD STUD
INSTALLATIONS
For CONCRETE
INSTALLATIONS
Follow 2A on PAGE 7.
Follow 2B on PAGE 8.
(qty. 1)
(qty. 1)
(qty. 5)
(qty. 5)

7
Max. 5/8 in. (1.5 cm)
Min. 16 in. (40.6 cm) Min. 3 ½ in. (8.9 cm)
Min. 1 ½ in. (3.8 cm)
CAUTION: Avoid potential
personal injury or property damage!
●Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
●Minimum wood stud size:
nominal 2 x 4 in. (5.1 x 10.2 cm)
actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
●Minimum horizontal space
between fasteners:16 in. (40.6 cm)
●Stud centers must be verified
2A Wood Stud Installation
1LOCATE 2VERIFY 3MARK
4X
4X
2 ¾ in. (6.9 cm)
7/32 in.
(5.5 mm)
4POSITION TEMPLATE
TIP: To calculate your precise wall plate location, check out
our HeightFinder at sanus.com [www.sanus.com/1172].
sanus.com
/1172
HeightFinder™
Visit 5DRILL
CAUTION:
Be sure you drill into the CENTER of the stud.
06
07
05
Skip to STEP 3 on PAGE 9.
6OPEN COVERS 7SECURELY TIGHTEN
All four lag bolts 07 MUST BE firmly tightened to prevent
unwanted movement of the wall plate 06 .Ensure the wall plate is
securely fastened to the wall before continuing on to the next step.
CAUTION: Avoid potential personal injury or property damage!
05 05
P
06
P

8
12 in.
(30 cm)
24 in.
(61cm)
12 in.
(30 cm)
5X
TIP:
TIP: To calculate your precise wall plate location, check out
our HeightFinder at sanus.com [www.sanus.com/1172].
1POSITION TEMPLATE
Solid Concrete or Concrete Block Installation
●Mount the wall plate 06 directly onto the concrete surface
●Minimum solid concrete thickness: 8 in. (20.3 cm)
●Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
●Minimum horizontal space between fasteners:
TOP RAIL: 12 in. (30.5 cm)
BOTTOM RAIL: 24 in. (61.0 cm)
●FOR CONCRETE APPLICATIONS, TV bracket 09 must remain
centered in wall plate 06 . Keep this in mind when selecting
the wall plate location
2B
CAUTION: Avoid potential personal injury or property damage!
sanus.com
/1172
HeightFinder™
Visit
Never drill into the mortar between blocks.
CAUTION:
Never drill into the mortar between blocks.
2DRILL
5X
CAUTION:
All five lag bolts 07 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 06 .Ensure the wall plate is securely
fastened to the wall before continuing on to the next step.
CAUTION: Avoid potential personal injury or property damage!
5X
14
08
05
5X
CAUTION:
Be sure the anchors 08 are seated flush
with the concrete surface.
CAUTION:
5SECURELY TIGHTEN
3OPEN COVERS
3/8 in.
(10 mm)
3 in. (7.6 cm)
34 INSERT ANCHORS
P
06
05
P
05
06
07

9
ATTACH TV TO WALL PLATE
STEP 3
3/32 in.
5/32 in.
10-32 x 3/8 in.
Parts and Hardware for STEP 3
Arm Assembly
LOCKING SCREWS
(ATTACHED)
CABLE COVERS
(ATTACHED)
10
09
Securement
Screw
12
11
Hex Key
Hex Key
06
09
1HANG
06
09
09
For CONCRETE APPLICATIONS:
The arm assembly 09 MUST remain centered in wall plate 06 .
CAUTION: Avoid potential personal injury or property damage!
HEAVY! You may need
assistance with this step.
2SECURE
09
06
S
12
3CLOSE COVERS
Always make sure both locking screws Sare tightened, so the arm
assembly 09 is securely fastened to wall plate 06 .
CAUTION: Avoid potential personal injury or property damage!
P
P
06
C
S
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included
and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
3.1 Attach the Arm Assembly to the Wall Plate
(qty. 1) (qty. 1)
(qty. 1)
(qty. 1)

10
MANAGE CABLES
1ROUTE CABLES 2ATTACH COVERS
CC
Pull arm 09 to its full extension, to leave enough slack
and prevent stretching the cables when the arms are moved.
IMPORTANT:
C
C
C
C
09
09
09
1HANG YOUR TV
HEAVY! You may
need assistance
with this step.
2ATTACH
04
04
Always make sure your securement screw 10 is tightened, so the TV is securely fastened to the arm assembly 09 .
CAUTION: Avoid potential personal injury or property damage!
3SECURELY TIGHTEN
04
09 10
12
3.2 Hang TV onto Arm Assembly