Sanus F11C User manual

F11c INSTRUCTION MANUAL
Scan for easy install video
san.us/251
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!

2
Does your TV weigh more than 35 lb (15.9 kg) including accessories?
No — Perfect!
Yes
— This mount is NOT compatible. Visit vuepoint.sanus.com or call 1-888-333-9952 to find a compatible mount.
35 lb
(15.9 kg)
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-888-333-9952.
Before getting started, let’s make sure this mount is perfect for you!
1
2
3
4
What is your wall made of?
Unsure?
?
Perfect! Call 1-888-333-9952
Drywall with
wood studs
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Solid concrete or concrete
block - call 1-888-333-9952
Do you have all of the tools needed? Optional
1/8 in.
(3 mm)
Wood
3/8 in.
(10 mm)
Concrete
7/16 in.
(12 mm) 3/8 in.
(10 mm)

3
Dimensions
7.9
[20.0]
3.9
[10.0]
3.0
[7.5]
8.9
[22.6]
7.0
[17.8]
5.2
[13.2]
9.1
[23.1]
2.2
[5.6]
3.9
[10.0]
3.0
[7.5]
7.9
[20.0]
1.7
[4.3]
12° 12°
in.
[cm]

4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
M4 x 12mm
M5 x 12mm
M6 x 12mm M6 x 35mm
M5 x 35mm
M4 x 35mm
M6 x 12mm M6
M4/M5 M6
STEP 1 Parts and Hardware
TV Bracket
TV Bracket Extenders*
†Nylon locking bracket nuts
are poly-locks and will need to
be forcibly tightened.
03 x4 04 x4
05 x4
07 x4
09 x4
06 x4
08 x4
10 x4
11 x4 12 x4 13 x4
02 x2
01 x1
TV Screws, Washers, and Spacers
M6 Extension
Bracket Screws* M6 Nuts*†
*Only needed for TVs
with 20.0 x 20.0 cm
(7 7⁄8 x 7 7⁄8 in.) hole
patterns

5
1/4 x 2½ in.
STEP 2 Parts and Hardware
14 x1 15 x1
Wall Plate
Wall Plate Template
Lag Bolts
16 x2
Concrete Installation Kit CMK2 (not included)
Contact Customer Service at 1-888-333-9952 to have these
additional pieces shipped directly to you.
x2
x2
1/4 in.
1/4 x 2½in.
x2
Fischer UX 10 x 60 Anchor

6
STEP 1 Attach TV Bracket to TV
1-1 Measure Your TV Hole Pattern
cm
inches
inch dimensions are approximate
Measure the width and height of your TV hole pattern in cm.
Record your measurements:
Width__________cm x Height ________ cm
75 mm = 7.5 cm ≈ 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7 7/8 in.

7
01
1-2 Assemble Your TV Bracket
Determine which TV bracket configuration to use, A or B based
on your TV hole pattern measurements.
A20.0
10.0
10.0
7.5
7.5
These smaller hole patterns only use TV bracket 01 .
Do not use the two TV bracket extenders 02 and four screws 03
and four nuts 04 .
7.5 x 7.5
10.0 x 10.0
20.0 X 10.0
Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.
Secure using four screws 03 and four nuts*04 in the corner holes
shown.
20.0 x 20.0
01
B
03
20.0
20.0
02
NOTE: Nuts
04 are poly-locks
and will need to be
forcibly tightened.
02
02
03
04
3/8 in.
(10 mm)
wrench
02
03
04

8
M5 M6M4
1-3 Select TV Screw Diameter 1-4 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M5, or M6) to use.
FLAT BACK ROUND BACK CABLESINSET HOLES
If your TV has a flat back AND you want your TV closer to the
wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-888-333-9952.
Too Short
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct

9
1-5 Attach TV Bracket
02
01
TV Bracket
Configuration A
Illustrated
(with spacers)
TV Bracket
Configuration B
Illustrated
(with spacers)
01
Short screw and washer
Spacer, long screw and washer
02
Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level.
Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
13
05
06
07
08
09
10
11
11
12
12

10
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 14 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit. Remove wall plate template 14 .
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2½ in. (63.5 mm).
STEP 2A Attach Wall Plate - Wood Stud
2 3
2½ in.
(63.5 mm)
1/8 in.
(3 mm)
14 14
≤ 5/8 in.
(16 mm)
1