Sanus VTVS1 User manual

VTVS1
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
[phone] UK: [phone]
We’re ready to help!
Texto en español, página 12 Deutscher Text Seiten 16 Svensk text sida 20
日本語は 26 ページ
Texte français page 14 Nederlandse tekst op pagina 18
Русский текст: стр. 22
中文文字说明请参见第 24 页

2
Before getting started, let’s make sure this mount is perfect for you!
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
1 Does your TV weigh more than 27.2 kg (60 lbs.) including accessories?
No — Perfect!
Yes — This mount is NOT compatible. Visit sanus.com or call [phone] UK: [phone] to find a compatible mount.
2 Do you have
the tools needed?
3 Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to
see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer
Service.
CAUTION: Avoid potential personal injuries and property damage! Manufacturer is not responsible for damage or injury caused by incorrect
assembly or use.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to
make sure the weight of the weight of the display and any accessories does not exceed 27.2 kg (60 lbs). Use with heavier televisions may result in
instability causing tip over resulting in death or serious injury!
WARNING: Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended by
the manufacturer.
WARNING: Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.
WARNING: Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result
in death or serious injury due to the furnishing collapsing or overturning onto a child.
NOTE: The VTVS1 has no user serviceable parts.
27.2 kg
(60 lbs.)
Level Screwdriver

3
Dimensions in. [mm]
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
7.08 in.
[180.00 mm]
4.72 in.
[120.00 mm]
3.97 in.
[101.00 mm]
26.45 in.
[672.00 mm]
8.03 in.
[203.99 mm]
15.98 in.
[406.00 mm]
23.93 in.
[608.00 mm]
3.38 in.
[86.00 mm]
10.43 in.
[265.00 mm]
21.87 in.
[555.70 mm]
17.21 in.
[437.29 mm]
15.75 in.
[400.00 mm] 7.87 in.
[200.00 mm]
23.62 in.
[600.00 mm]
16.92 in.
[430.00 mm]
12 in.
[305.00 mm]
18.00 in.
[457.00 mm]
7.08 in.
[180.00 mm]
4.72 in.
[120.00 mm]
3.97 in.
[101.00 mm]
26.45 in.
[672.00 mm]
8.03 in.
[203.99 mm]
15.98 in.
[406.00 mm]
23.93 in.
[608.00 mm]
3.38 in.
[86.00 mm]
10.43 in.
[265.00 mm]
21.87 in.
[555.70 mm]
17.21 in.
[437.29 mm]
15.75 in.
[400.00 mm] 7.87 in.
[200.00 mm]
23.62 in.
[600.00 mm]
16.92 in.
[430.00 mm]
12 in.
[305.00 mm]
18.00 in.
[457.00 mm]
7.08 in.
[180.00 mm]
4.72 in.
[120.00 mm]
3.97 in.
[101.00 mm]
26.45 in.
[672.00 mm]
8.03 in.
[203.99 mm]
15.98 in.
[406.00 mm]
23.93 in.
[608.00 mm]
3.38 in.
[86.00 mm]
10.43 in.
[265.00 mm]
21.87 in.
[555.70 mm]
17.21 in.
[437.29 mm]
15.75 in.
[400.00 mm] 7.87 in.
[200.00 mm]
23.62 in.
[600.00 mm]
16.92 in.
[430.00 mm]
12 in.
[305.00 mm]
18.00 in.
[457.00 mm]
7.08 in.
[180.00 mm]
4.72 in.
[120.00 mm]
3.97 in.
[101.00 mm]
26.45 in.
[672.00 mm]
8.03 in.
[203.99 mm]
15.98 in.
[406.00 mm]
23.93 in.
[608.00 mm]
3.38 in.
[86.00 mm]
10.43 in.
[265.00 mm]
21.87 in.
[555.70 mm]
17.21 in.
[437.29 mm]
15.75 in.
[400.00 mm] 7.87 in.
[200.00 mm]
23.62 in.
[600.00 mm]
16.92 in.
[430.00 mm]
12 in.
[305.00 mm]
18.00 in.
[457.00 mm]

4
M8 x 14 mm
5 mm
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
Base
Foot Pads
Stand Mounting Screw M5 Hex Key
Plate
04 x8 05 x1
01 x1
02 x4 03 x1 06 x1

5
M4 X 12 mm
M4 X 35 mm
M6 X 12 mm
M6 X 35 mm
M8 X16 mm
M8 X 20 mm
M8 X 35 mm
M4/M5
M6/M8
22 mm
4 mm
STEP 2 Parts and Hardware STEP 3 Hardware
M4 Hex Key
M4 X 12 mm
M4 X 35 mm
M6 X 12 mm
M6 X 35 mm
M8 X16 mm
M8 X 20 mm
M8 X 35 mm
M4/M5
M6/M8
22 mm
4 mm
TV Brackets
Spacers
TV Screws Washers
08 x4
09 x4
10 x4
12 x4
13 x4
14 x4
15 x4
16 x4
17 x4
18 x1
07 x2
11 x4

6
Place foot pads 02 on the bottom of the
base 01 in the corners.
Attach the stand 03 to the base 01
using four M8 x 14 mm screws 04 and
the 5mm hex key 05 .
1.1
1.2
Step 1 Assemble Stand
01
02
01
02
03
04
05

7
1.3
Attach the plate 06 to the stand 03
using four M8 x 14 mm screws 04 and
the 5mm hex key 05 .
06
03
04
05

8
M6 M8
FLAT BACK ROUND BACK CABLES
Too Short
Correct
Too Long
INSET HOLES
M4
2.1 Select TV Screw Diameter 2.2 Select TV Screw Length
If your TV has a flat back, use the shorter TV screws.
Spacers and longer TV screws are supplied to accommodate:
●irregular / round back TVs
●TVs with inset mounting holes
●extra space needed for cables
Hand thread TV screws into the threaded
inserts on the back of your TV to determine
which screw diameter (M4, M6, or M8) to use.
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
- Too short will not hold the TV.
- Too long will damage the TV.
Step 2 Attach TV Brackets to TV

9
2.3 Attach Vertical TV Brackets
a Flat Back
b Round Back / Extra Space
Ensure that your TV brackets 07 are level and centered on the back of the TV.
Install using the TV screw/washer/spacer configuration you selected for your TV.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the TV screws only
enough to secure the TV brackets 07 to the TV. DO NOT overtighten the TV screws.
IMPORTANT: Ensure TV brackets 07 are securely fastened before moving on to the next step.
*NOTE: Back off locking screws L enough to give clearance when mounting to plate.
08 09 10 11
15 16
07
15 16
12 13 14
17
L

10
1.57 in.
(40 mm)
4.72 in.
(120 mm)
Example
23 in.
(585 mm) Example
23 in.
(585 mm)
Step 3 Determine Height of TV on Stand
The stand 03 can be adjusted to
provide for dierent size TVs.
Before mounting the TV, adjust the
stand to the desired height. Remove the
four screws S using hex key 18 ,
slide the stand 03 up or down to the
desired height and reinstall the four
screws S.
1.57 in.
(40 mm)
4.72 in.
(120 mm)
Example
23 in.
(585 mm) Example
23 in.
(585 mm)
03
03
S
18