Sanyo VPC-TH1BL User manual

Is there enough power left in the battery? Recharge
the battery pack.
(See “Charge the battery pack” on the reverse side.)
If the image is not captured...
Turn on the camera.
Press the ON/OFF
button for at least
1 second.
If the screen to
set the date and
time appears,
press the MENU
button 2 times to
cancel it.
The scene at the
time the [ ]
button was
pressed is
captured as a still
image.
STEP 1
RECORD A VIDEO CLIP
STEP 2
CAPTURE A STILL IMAGE
QUICK GUIDE
Turn on the camera.
Press the [ ]
button.
Press the [ ]
button to begin
recording.
To capture a single
shot while
recording, press the
[ ] button.
You can capture a still image while recording
a video clip.
To stop recording,
press the [ ]
button again.
Press the [ ]
button to begin
recording a video
clip.
Dual Camera
VPC-TH1EX
VPC-TH1
VPC-TH1GX 1
1
2
2
2
1

Card slot cover
2Pull
Battery pack
Card Card slot
4Insert
Battery cover
2
Monitor unit
1Open
Card slot cover
3Rotate to open
5 Insert the card until it clicks into place
After inserting the card, close
the card slot cover.
Press the REC/PLAY
button.
STEP 4
DELETING IMAGES
STEP 3
VIEWING IMAGES
The last recorded
image is displayed.
Select the image to
play back.
Toggle the SET button
left, right, up or down
to move the orange
frame to the file you
wish to play back.
Press the SET button.
The image you
selected in step is
displayed fullscreen.
If a video clip was
selected, playback
begins.
Display the image
that you want to
delete.
Toggle the SET
button up.
 The Confirm Delete
Screen appears.
Select “DELETE”,
and press the SET
button.
The current image
is deleted.
To return to the
Playback Screen,
select “EXIT”, and
press the SET
button.
Even if you make a mistake, it’s easy to delete the
pictures you aren’t satisfied with. Unlike film cameras,
with a dual camera you can take all the photos you
want, keep the ones you like and delete the rest.
Did your photos turn out the way you hoped?
11
3
2
2
3
 An SD Memory Card is not included with your
camera. Please purchase a commercially sold
card.
 In this manual, the SD Memory Card is
referred to as the “card”.
After installing the battery pack, connect the AC
adaptor (supplied) to the camera’s DC IN
terminal and charge the battery.
INSTALL THE BATTERY PACK AND CARD
Insert the cardInsert the battery pack
1
Battery cover
lock
2