Sanyo XT-32S7201H User manual

XT-32S7201H
(HD)
LED TV
E-mail: [email protected]
Need help? Please Call at Toll Free No. 1800 419 5088
To obtain a more detailed Electronic Copy of this
Manual or much further contents,go to product page
at our website www.sanyoappliance.in
Thank you for purchasing this Sanyo product.
Please read these instructions carefully before operating this
Product and retain them for future reference.
The images shown in this manual are for illustrative purpose only.

ATTENTION:
2
This product is qualified for the BEE Star rating in the ‘Home / Standard’ Mode. The Objectives of Star Labeling Program is designed to
promote energy efficient products and practices.
When the television is initially set up,it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
Depending upon such changed setting (eg., Retail mode),the power consumption may vary which possibly could exceed the stated
energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under
the ‘Set-up’ menu.

3

4
1 Connect the pedestal to the TV set
Put the two pedestals on the designated positions
of the TV set carefully.
Lay your TV flat (screen down) on the edge of a
table or bench. Make sure that you put down a
soft cushion or cloth so that your TV is not
scratched.
2 Fasten and tighten the screws
Carefully put in screws and fasten them securely.

5
ST M4 x 12
XT-32S7300H
(HD)
LED TV
E-mail: [email protected]
Need help? Please Call atToll Free No. 1800 419 5088
Toobtain a more detailedElectronic Copyof this
Manualor much further contents,go to product page
at our websitewww.sanyoappliance.in
Thankyou for purchasingthis Sanyo product.
Pleaseread these instructionscarefullybefore operatingthis
Productand retain them forfuture reference.
The imagesshown in this manualare for illustrativepurposes only.
M6*22
Screw
M6*18
Screws

AC IN ~
PC
VIDEO L R
AV 1 IN
HEADPHONE
USB 1
USB 2
PC AUDIO IN HDMI 1 (Sound Out) HDMI 2 ANTENNA AV OUT
AV 2 IN
USBx2
AV OUT
ANTENNA
9 HDMIx2
8
7
6
10 PC AUDIO IN
HEADPHONE
AV 1 IN
PC
6
2
2

7
1
AV 1 IN
AV 2 IN
USB 2
USB 1

8

9
source
Press to select Audio only mode ON or OFF.
This key will function to freeze the Picture except on USB Mode.
AUDIO ONLY
POWER
INPUT
USB
MUTE
PICTURE
SOUND
SLEEPSLEEP
MENU
RETURN
OK
INFO
EXIT
VOL
CH
0-9
FREEZE
ASPECT

10
VOL+
VOL-
CH+
CH-
MENU
POWER
5
4
3
2
1
SOURCE
5.
4.
3.
2.
1. POWER
Standby or switch on the TV.
Display or exit MENU.
Press it to display input source list. Press it continuously to select preferred source and confirm by
(VOL+) button. It can be used to confirm submenu in MENU operation.
MENU
To be used to change channels.
VOL-/+
To be used to adjust volume.
CH-/+
Note:-
The location and names of the function buttons and power button on the TV may vary according
to TV mode.
SOURCE