Sanyo VMC-7321E User manual

VMC-7314E
VMC-7321E
Please read this Instruction book before using your Monitor set.
Colour Monitor
QUICK GUIDE
F
F

2
MINIMUM DISTANCES
10cm
5cm
20cm
10cm
!
SAFETY
SAFETY PRECAUTIONS PRECAUTIONS
Do not allow anything to rest on the power
cord
Do not locate this colour monitor where the
cord will be damaged by people walking on it.
Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation to
ensure reliable operation and to protect it
from overheating. These openings must not
be blocked or covered.
The opening should never be covered with a
cloth or other material, and the bottom
openings should not be blocked by placing
the television receiver on a bed, sofa, rug, or
other similar surface.
This colour monitor should never be placed
near or over a radiator or heater. This colour
monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided
Do not place your colour monitor on an
unstable stand, shelf or table.
Serious injury to an individual, and damage
to the monitor may result if it should fall. Your
sales person can recommend approved
stands or shelf and wall mounting
instructions.
If the monitor is to be built into a compartment
or similarly enclosed, the minimum distances
must be maintained. Heat build-up can
reduce the service life of your television, and
can also be dangerous.
This colour monitor should be operated only
from the type of power source indicated on the
monitor or as indicated in the Operating
Instructions. If you are not sure of the type of
power supply in your home, consult your sales
person or your local power company.
Never add accessories that have not been
specifically designed for this monitor.
Do not drop or push objects into the
monitor cabinet slots or openings. Some
internal parts carry hazardous voltages and
contact may result in an electric shock
hazard. Never spill liquids of any kind on the
colour monitor. Do not place items such as
vases containing liquid on top of the monitor.
Do not expose the colour monitor to rain or
use near water. For example, near a bathtub,
kitchen sink, in a wet basement, etc. Before
cleaning, unplug the colour monitor from the
wall socket.
Never stand on, lean on or push the monitor
or its stand. Never allow children to play with
the monitor or its stand. Serious injury may
result if it should fall.
Do not apply liquid cleaners or aerosol
cleaners directly onto the colour monitor. Use
a damp cloth for cleaning.
Do not place candles or hot objects upon the
monitor, next to it or behind it. Open flames
must never be used near the monitor.
!!
MINIMUM DISTANCES
10cm
5cm
20cm
10cm
CAUTION: Please read and retain for your safety.
This colour Monitor has been engineered and manufactured to assure your personal safety. But improper use can result in potential electric
shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use
and servicing.
Installation Use

3
INST
INSTALLA ALLATION / GENERAL TION / GENERAL OPERA OPERATION TION
Connect the power cord of the monitor to a wall outlet.
✐ The monitor is prepared for a mains voltage AC220~240V, 50Hz.
When the monitor is not to be used for an extended period of
time, it is advisable to disconnect the power cord from the power
outlet.
■To turn the monitor ON, press the Mains ON/OFF switch. The
power indicator illuminates to show the power is on.
■ To turn the monitor OFF, press the Mains ON/OFF switch
again.
Press the button repeatedly to select Volume, Brightness,
Contrast, Colour, Sharpness. Press the or button to adjust
the selected control. When the control menu is not displayed, the
or button enable you to switch programme position.
Volume : To adjust the sound volume.
Brightness : To adjust the picture brightness.
Contrast : To adjust the picture contrast.
Colour : To adjust the picture colour.
Sharpness : To adjust the picture sharpness.
Tint : To adjust the colour phase. (This appears when NTSC
signals are input.)
F
VIDEO IN
AUDIO OUT AUDIO IN VIDEO OUT
AC Outlet
F
Mains Supply Switching-on your TV
Control selection and adjustment
WARNING
High voltages are used in the operation of this set.
Refer to qualified service personnel
AV Connection
Terminal Description
VIDEO IN BNC connector for video in.
VIDEO OUT BNC connector for video out.
AUDIO IN BNC connector for audio in.
AUDIO OUT BNC connector for audio out.
F
-/+ Button levels
up and down
Function key
Mains On / Off
switch
Standby light
Remote sensor
!
If you find the power indicator flashing, please turn the
monitor off completely with the Mains ON/OFF
button and contact our service desk.
This warning is a sign to let you know that the power
protection function of this monitor is now operating.
Be sure to set the Mains On/Off button to the OFF
position if a power failure occurs.

TV SPECIFICA
TV SPECIFICATIONS TIONS
Part No. SKP10348-A C3MS/C3LSS Printed in U.K.
Monitor specification
Power source AC 220~240V 50Hz
Colour system PAL,NTSC
Input terminals
Video IN BNC connector
Audio IN RCA connector
Output terminals
Video OUT BNC connector
Audio OUT RCA connector
VMC7314E VMC7321E
Sound output
(continuous)(watts) 1.5 1.5
Picture tube
(Diagonal) (cm) 37 55
(Visible picture diagonal) 34 51
Dimensions
(W x H x D mm) 370 x 336.5 x 379 514 x 466 x 482
Weight (kg) 9.0 19.0
TV specification