Sanyo C25PP81S User manual

INSTRUCTION MANUAL
Colour Television
Sli’ o
C25PP81S
C25PP86N
I
STEREO
SURROUND
TELETEXT
VIDEO MULTI TERMINAL(PAuNTSC/NTSC4.43/PAL -60Hz)
BLUE BACK FUNCTION ON AV MODE
Model C25PP81 S –Equipped with the West Germany Stereo Decoder. (Not equipped with the Teletext Decoder)
ModeI C25PP86N –Equipped with the West Germany Stereo Decoder, NICAM Digital Stereo Decoder and
Teletext Decoder.

Electric Mains ................................................................................ 2
Aerial Connection .......................................................................... 3
Warnings and Cautions ................................................................. 4
Remote Control Transmitter (for Model C25PP86N) ................... 6
Remote Control Transmitter (for ModeI C25PP81 S) ................... 7
Front Controls ................................................................................ 8
General Operation
Power ON/OFF, Programme Selection (Direct Selection) ...... 9
Programme Selection (Programme UP and Down) ................ 10
Volume Control, Recall, AKernate ............................................ 10
Bass Expander, Surround ........................................................ 11
Stereo and Bilingual Broadcast Receiving .............................. 11
NICAM Stereo and NICAM Bilingual Broadcast Receiving .... 12
Sound Mute .............................................................................. 12
OFF Timer, Memory, Normalization ........................................ 13
Picture and Sound Adjustments .............................................. 14
Tuning of the Channels
Automatic Tuning, Channel Copy ............................................. 15
Semi-Auto Tuning and Manual Tuning .....................................16
Teletext Operation ......................................................................... 17
Switching to the Teletext Mode, Page Selection ......................l8
To Display the Index Page ........................................................l8
Sub Coded Page Access .........................................................l9
Viewing TV While Searching for aPage .................................. 19
Hold, Double Letter Height ....................................................... 20
Displaying Concealed Information, News Flash ......................20
Updated Page, Time .................................................................2l
FLOF (Full Level One Feature), Non FLOF Service ................22
Setting Restricted Programmed ....................................................23
Maximum volume level setting
and suppression of channel tuning .................24
Using the Remote Control VCR buttons .......................................25
Connecting other Equipment
Connecting to the AV1 Input Jacks ..........................................26
Connecting to the Front Panel AV2 Input Jacks ......................27
Connecting to the AV Output Jacks .........................................27
To record aTV broadcast while
watching the playback from aVCR ..................28
AV Connection tothe Aerial Socket .........................................29
Specifications .................................m...............................................3o
AC 220 – 240 Volts, 50Hz.

•l
Mllml IIIIMM
IMMl mm Onomllll
\
%
.
II
II
AV Terminal \
lr Aerial Socket
4Connect the cable with aplug from a
oUHF(or VHF) aerial to the aerial socket
on the cabinet back.
%.
0111111111111111111111~’%111111111111111111w
!!11111Illllllllllllllllllllllllllll!l1111111
/
For all aerial circuit problems please consult your local dealer.

~Warning
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to quaiified service personnel.
AWarning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
AWarning
Do not drop or push objects into the television cabinet
siots or openings.
Never spiii any kind of iiquid on the television receiver.
,~cm Minimum distances 1Ocm
~~ ~ 5cm
A1Caution
●
20cm if the television is to be built into a
compartment or similarly enciosed, the
minimum distances must be maintained,
Heat build-up can reduce the service life of
your television, and can also be dangerous.

A
!caution
Never stand on, lean on or push suddenly the television or its
stand. You should pay special attention to children. Serious
injury may result if it should fall.
A1Caution
●
Do not place your television on an unstable cart, stand, shelf or
II
table. Serious injury to an individual, and damage to the
television, may result if it should fall.
H
m
4!?
qA1Caution
●
When the television receiver is not used for an extended period
c1
.1, ,, of time, it is advisable to disconnect the AC power cord from
the AC outlet.
\%
.*”
J
,...-
A1Caution
“...●
...
#1.,‘.. Avoid exposing the television receiver to direct sunlight and
.. :
: .,
:other source of heat.
Do not stand the television receiver directly on other products
which give off heat. E.g. video cassette players, audio
amplifiers.
A1Caution
●
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of electrical
components,
A1Caution
●
Do not squash power supply cord under the television receiver.

@TVIAVSelector _
=‘igi’~
f
~Programme
Seiector
FUNCTiON @
NORMALIZATION @—~
Programme UP/DOWN ~—=
BASS EXPANDER @—
SURROUND ON/OFF @—-
.......................................................
Power ON/OFF
l--
Teietext buttons
~ALTERNATE
XRECALL/ COLOUR SYSTEM
>LEVEL
~SOUND MUTE
~—@ STEREO /BiLiNGUAL
~OFF TIMER
[Battery installation of the Remote Control Transmitter )
❑Remove the battery cover by siiding.
❑install two “AA”1.5 voit batteries so that the “+” and “-” marks on the batteries match the
“+” and ”-” marks inside the unit.
❑Close the battery cover.
Note: Replace the batteries when the TV set is showing the foiiowing symptoms:
Operation is unsteady or erratic, sometimes the TV set does not work with transmitter.
Discharged batteries may ieak and damage the unit,
The normai iife of batteries shouid be from nine to ten months.

@TVIAV Selector _
-“’’it>
i
~Programme
Selector
FUNCTION ~
NORMALIZATION @—-
Programme UP/DOWN g—=
BASS EXPANDER @—
SURROUND ON/OFF @—.
Power ON/OFF
~ALTERNATE
~RECALL/ COLOUR SYSTEM
>
LEVEL
—~ SOUND MUTE
~—@ STEREO /BILINGUAL
~OFF TIMER

Remote Control Detector
Stand-by and Power Indicator 1 1
II,,
II
p)
1
\
J‘Push to open bMains ON/OFF
Button
. ,
I,W7.
,(MONO) P-M-
pgwp * --A+ VPA
AV2 IN
L-AUDIO -JEVEL
/, ides’ack
~\~,,,~,,T
COLOUR SYSTEM Selector
Headphone Jack (Mini Stereo Jack)
(For personal listening, a headphone can be
connected to the headphone jack.)

(POWER ON/OFF
To switch the TV on or off; To set the TV into the standby mode;
~iii
/
(/
Press the Mains ON/OFF
button ~.
The power of the TV is turned on
or off completely.
If no picture appears but the standby
and power indicator illuminates, press
the Power ON/OFF ~button on
the remote control transmitter as the
TV set is in the standby mode.
Important !
Be sure to set the Mains ON/OFF switch
the power failure occurs while viewing.
Press the Power ON/OFF button ~.
During standby mode the standby
and power indicator illuminates more
brightly.
To turn the TV on from the
standby condition, press any of
the following buttons;
,Ii
u
8
Power ON/OFF ~
(Remote control transmitter)
Pv PA
(?(?
Programme UP/DOWN@
(Remote control transmitter)
lto90r OKey
m
6(Remote control
transmitter)
Programme UP/DOWN @
~to the off position, if button on the TV set.
AUTO SHUT OFF
This TV set incorporates the AUTO SHUTOFF function. Remaining time
\I
Even if the TV is left on after you have gone to sleep, the TV set changes
to the standby mode within 10 minutes after all broadcasts have ended. }
29
–lo
(Programme Selection (Direct Selection) 1
mI
Programme
Selector
“
To select programme position 8directly, press 8button.
8
To select programme position 10
-/-- *
(?77? 1-, ‘~ 10,
~Press the Digit ~VPress 1button. ~Press O button.
button.
To select programme position 27

IProgramme Selection (Programme UP and Down) 1
You can step upwards to the next programme position by pressing the P A button ~on the remote
control transmitter or the TV set. Or step downwards using
Iluuuull
Programme
UP/DOWN
BAS
the PTbutton.
[Volume Control
Increase or decrease the Sound volume level by pressing the LEVEL (+or –)buttons ~.
A+
Pv
BASS SURROUNDV
00 4SOUND
111111 ---------
[RECALL
To display the on screen indications, press the RECALL/ COLOUR SYSTEM button @.IfProgramme
Position
~RECALL/
COLOUR SYSTEM ~‘Mer +30 24
II I
Screen display disappears after
about 5seconds.
[ALTERNATE
Press the ALTERNATE @button, and the programme position will
alternately select the previous position and the present position. I
FQ +.+- pep ~~
o
?5’
o
+
Pv PA
o-0.@ALTERNATE w
For example, now you are watching programme position
“4 but you watched programme position”2 previously. If
you press the ALTERNATE button, programme position
“2 immediately appears.

BASS EXPANDER
To get aemphasis bass sound, press the BASS EXPANDER @.
BASS
EXPANDER
ISURROUND
ASOUND BASS
111111---------
Whenthe SURROUND ON/OFF@ butionis pressed with stereo broadcast receiving, youcan enjoy the
surround effect.
When the SURROUND ON/OFF @button is pressed with monaural broadcast receiving, you can enjoy the
stereo effect.
@\
SURROUND
ONIOFF
.
Stereo and Bilingual Broadcast Receiving 1
SURROUND OFF SURROUND ON
Stereo tI
When receiving the stereo broadcast, “STEREO” is I
displayed. You can select the stereo or monaural mode by
pressing the STEREO /BILINGUAL button @and the
display changes as illustrated.
STEREO IIMONO
(r .
Bilingual I
When receiving the bilingual broadcast, “A” is displayed.
L
A
You can select the main (A) or sub (B) language by
pressing the STEREO /BILINGUAL button @and the
display changes as illustrated.
STEREO /
BILINGUAL
1
I

[NICAM Stereo and NICAM Bilingual Broadcast Receiving
(Model C25PP86N only)
NICAM Stereo
When receiving the NICAM stereo broadcast, ”NICAM” is
displayed. You can select the stereo or monaural mode by
pressing the STEREO /BILINGUAL button @and the
display changes as illustrated, r-r
VA*B
r
.
STEREO /
BILINGUAL
NICAM Bilingual
When receiving the NICAM Bilingual broadcast, “A is
displayed. You can select the main (A), sub (B) language
or Mono by pressing the STEREO/ BILINGUAL button @.
r-r
LMONO
~
Should you wish to mute the sound (e.g. While talking on
the telephone), press the SOUND MUTE @key,
BASS SURROUNDVIW
~SOUND MUTE
[m+@ fj$(SOUND MUTE
111111---------
To switch the sound back on,
press SOUND MUTE key again.

~
The TV set will be turned off after about 30,60,90
or 120 minutes,
7!?
/50- “
■++@
00 ‘OT
. . ........ .. ........... P
“OFF TIMER
To cancel the OFF TIMER
Press the OFF TIMER key until” –00” appears.
Press the OFF TIMER @button to select the time period and
change it as follows;
I-00 -1-30~1-60
I I 1
No off timer After 30 minutes After 60 minutes
L, +
-120 <—l -90
II
After 120 minutes After 90 minutes
●Just one minute before switching off the TV, “–01” and
channel number will be displayed on the screen.
1–
01 25
~
This function lets you store the settings (for colour, brightness, contrast, tint, sharpness, sound volume)in the memory for
both picture and sound, and these setting levels can be recalled by pressing the NORMALIZATION @button of the
remote control transmitter.
To store the picture and sound settings
(1)Set the picture and sound to the desired levels. —> ,f :flND
......... etc.
(2) Press the MEMORY/PRESETO @button while the control function display is still visible on the screen.
JP—M- -A+ VPA
SY ~“EE_l
MEMORY/PRESET
NOTE: The control settings will not be saved if the MEMORY button is pressed after the control function display has
left the screen.
~NORMALIZATION ]
IPress the NORMALIZATION @button NORMAL
-->+--
t-
I
NORMALIZATION The colour, brightness, contrast, tint, sharpness and
sound volume settings which you stored using the
MEMORY button are recalled.

Picture and Sound Adjustments
(1) Press the FUNCTION @button repeatedly until the (2) Press the LEVEL @+ or –button to adiust
desired control appears on the screen.
?\+
II‘e”
BASS SURROUNDVA*B
nnnn
. . the selected contr~l level.
Each time the FUNCTION button is pressed, function choice will change as follows;
\
\A+
A—
BASS SURROUNDVJV
7+
@COLOUR
11111111111----
Colour intensity
Display off
r-
MBAIANCE
. . .. J).+ .......
BALANCE
~BRIGHT
11111111111 ----
Brightness
(To equalize the output from the
4TREBLE
.......+---J---
TREBLE
lm!!!k
Contrast
and NTSC signal only)
~TINT
11111111111 ----
HTint
/
(Operative for NTSC4.43
+
T: BASS
------- t-J-----
BASS
MSHARPNESS
11111111111 ---- I
Sharpness
+
‘r-
<>
Fine tuning
(Operative for TV mode only)
left and right speakers)

There are three ways of tuning as follows;
Automatic Tuning (the basic way)
All receivable channels are automatically tuned in and memorized in consecutive programme positions.
Semi-Auto Tuning
Use to Preset areceivable channel in any desired programme position, e.g. the position with the same number as the
channel.
Manual Tuning
Manually tune achannel if it cannot be automatically tuned, such as when the signal is poor.
1Automatic Tuning
(1) Press the MEMORY/PRESET button @.
JP—M-
-A+ VPA
SY
Iv~MEMORY/PRESET
(2) Press the LEVEL(+) @button.
-J P—M- -4+ VPA
(5I @@@
SYSTEM OF LE
Programme —,
Position
rAUTO TUNING 2
Channel Band
.. ... . . . .
II
L...........
...
II
The channels are preset in consecutive positions t)egmnmg Trom
r
●
the programme position “l”. ●
After all available channels have been preset, the unit returns to ●
●
the position”1”.
Note: To cancel automatic tuning midway, press the MEMORY/
PRESET @or Power ON/OFF ~button. 1+“””””:
IChannel Copy I
Example: To copy the TV channel in the programme position 2into the programme position 6
(1) Select programme position 2. I2I
(2) Press the MEMORY/PRESET button @3times. ‘H
,MANU
~
(3) Select program me position 6using the Programme UP/DOWN ~button of the TV set.+ L 111111111------ -
\IZ
(4) Press the FUNCTION button @of the TV set. ->_ -MANUAL 6
L111111111------ t’
(5) Press the MEMORY/PRESET button e.
I,1~

[Semi-Auto Tuning &Manual Tuning
Example: To preset achannel in programme position 6
I
Semi-Auto Tuning
J+’
Manual Tuning
&
[
(1) Select programme position 6.
LI
(2) Press the MEMORY/PRESET button @twice. (2) Press the MEMORY/PRESET button @3times.
\J
MEMORY/PRESET
3fT
(3) Press the LEVEL(+) or(–) ~button. (3) Press and hold the LEVEL(+) or(–) @button
until the desired station appears.
&i k@- F
SYSTEM 0LEVEL
When astation is found,
searching stops automatically. d
LEVEL
L
v~FUNCTION
[1
(5) Press the MEMORY/PRESET button @twice. ~
—1 [(5) Press the MEMORY/PRESET button @.~
\/
mbMEMORY/PRESET
●Repeat steps 1to 5for other desired channels.

REVEAL (GREEN) —
CANCEL (RED) —
lV/TEXT/MIX
[
SIZE
7
Page Selection
b
Page
UP(A)/DOWN(V)~
678
=
90 +-*
G1 +*+ P*P am
0000
&e+
BASS SURROUND~&B M
—YELLOW
TIME/SUB (CYAN)
INDEX
—Digit
1
(1) To use CANCEL, REVEAL or TIME/SUB in Text
mode, press the Digit button first.
1To return to the normal text
display, press the Digit button
again. $
ITEXT PAGE 1ITEXT PAGE
1
T
You can use CANCEL, REVEAL
or TIME/SUB when this display is
shown.
(2) Next, press the CANCEL, REVEAL or TIME/SUB
key.
Note: Model C25PP81 S –Not equipped with the Teletext Decoder.

■Switching to the Teietext mode
Press the lVflEXT/MIX button, and the screen
~oao
SQJaa ~ ~
&
changes as follows:
m-m-l=
IIIII
■Page Seiection
Direct Page Access
ATeletext page can be selected with the “O to”9 buttons.
For example:
&+&+&
To select page 120, press
UP- DOWN Page Access
Press the Page UP(A) button to step up to the next higher Teletext page.
Press the Page DOWN(V) button to step down to the next lower Teletext Pa9e”
A+ PA
8.3
A—
UP
HTo dispiay the index Page
To return to the index page, press the iNDEX button
~oo~
e~-J~ &Q)
6
P120
TEXT
PAGE
119 121 130 200

■Sub- Coded Page Access
When aTeletext information page exceeds more than one screen of information, it may take some time for the automatic
changing of the sub-pages to reach the sub-page you require.
It is possible to enter your required sub-page and continue watching the normal programme until the correct sub-page is
found.
(1) Select atext page which has sub pages.
(2) Press the Digit button.
‘&I,x=_
(3) Press the TIME/SUB button. B
(u
*@l *HI *@
Oaafi P\
S***% To go back to normal Teletext page
@@o@ ~ ~ entry mode, press the Digit button
TEXT PAGE again.
L0000 J
(4)Enter the desired sub- page.
<Example:
To enter the sub
page “1O“, you must
press the O, 0, 1, and
Obutton. ~~~1$ ~=~
\
(5) Press the CANCEL button. \
~/? Fl+w=s?i{’;i;’:
~
CANCEL Normal TV Picture Normal TV Picture
(6) Press the TV/TEXT/MIX button to display the received sub-page.
‘~ =1 ‘‘~-pageaccessoperation.
To clear the sub-coded page, enter anew page number.
It IS not possible to select another television station during a
HViewing TV while searching for apage
In some cases it
CANCEL button.
P351 P301
TEXT
PAGE
199 101 110 220
can take some time to look for apage. In the interval you can view the TV by pressing the Digit and
.~+~.
Digit CANCEL
LNormal TV Picture
m“ When the page arrives,
the page number will
appear on the normal TV
picture.
P351 ‘
TEXT
PAGE
~
350 352 360 400

■HOLD 131
When atext page has sub- pages, you can prevent the sub
page being automatically changed by pressing the HOLD
button. Press the HOLD button again to resume page change
or enter anew page number. N==
HOLD
■Double letter height {>
Either the top or bottom half of the E
display can be expanded by pressing
the SIZE button. @=~p~Fl
SIZE 4Upper half of Lower half of
the screen the screen
,Displaying conceaied information
Some of the text pages are in the form of aquiz or puzzle.
The answer to these can be revealed by pressing the Digit and REVEAL button.
\
8(EJ”8+-1”84-I
Digit REVEAL REVEAL
■News fiash
anewsflash page.
(1) In the text mode, select (2) Press the Digit button. (3) Press the CANCEL (4) AS soon as news comes
*@l button.
P
P500
NEWS FLASH
I599501 510 600
+--*
a==”
-* l(x) (?) S****
(TEXT mode) (TEXT mode)
Note : It is not possible to select another TV station
during aNEWS FLASH. You should first switch
back to TV reception by pressing the
TV/TEXT/MIX button.
J“l’f
WI”; ‘., ,.,
in, the word “NEWS
FUSH” and the news
appears over the normal
TV picture. I
i
~k+” ‘#/
(Normal TV picture) LNEWS SH
/4”4, I
~500
SPORT NEWS
599 501 510 600
(5) Press the TV/TEXT/MIX
button. I
P500
=“\ $
SP TNEWS
4+?
599 501 510 600
(TEXT mode)