Sanyo CE32LDY1-B User manual

CE32LDY1-B
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Colour Television
INSTRUCTION MANUAL

2
END-USER LICENCE & SERVICING
END-USER LICENCE & SERVICING
The product (meaning the equipment or appliance to which this
documentation relates) incorporates Software (the software applica-
tions, utilities and modules embedded within the Product) which is
owned by Sanyo or its licensors. Before using the product, please
read the End-User Licence Conditions detailed below. If you do not
agree to the terms and conditions of the End-User Licence, Please
do not proceed to use the Product- repack the Product unused and
return it to your supplier together with proof of purchase for a full
refund. By using the product, you agree to be bound by the terms
and conditions of the End-User Licence.
Licence Grant, Conditions and restrictions
1. Sanyo grants you a non-exclusive, world-wide (subject to export
controls), non-transferable (except as permitted by 2 below),
royalty-free licence to use the Software upon and with the Product.
2. You may not transfer any of your licence rights in the Software
without the prior written consent of SANYO and if consent is
provided then the Software shall only be transferred in conjunction
with the transfer of the Product AND provided that the transferee
has read and agreed to accept the terms and conditions of this
licence.
3. You must ensure that the copyright, trademark and other protective
notices contained in the Software are maintained and not altered
or removed.
4. The Software provided hereunder is copyrighted and licenced (not
sold). SANYO especially does not transfer title or and ownership
rights in the Software to you. The Software provided hereunder
may contain or be derived from portions of materials provided to
SANYO under licence by a third party supplier.
5. Except as expressly permitted by statute you may not;
● use the Software in conjunction with any other computer
hardware other than the product;
● copy all or part of the Software;
●incorporate all (or any of) the Software into other programs
developed by (or on behalf of) you and/or used by you;
● reverse-engineer, decompile or disassemble the Software;
●make the Software (or any part of it) available, or permit its
redistribution, for use with any computer hardware other than
the Product; or rent, lease, gift, loan, sell, distribute or transfer
possession of the whole or any part of the Software.
Termination
This licence is effective until terminated. This licence will terminate
automatically without notice if you fail to comply with any of its
provisions.
Disclaimer
1. The Software is(to the extent permitted by law) supplied ‘as is’ and
SANYO and its suppliers expressly exclude all warranties, express
or implied, including (but not limited to) warranties of satisfactory
quality, fitness for purpose and non-infringement (save to the
extent that the same are not capable of exclusion at law).
2. In no circumstances will SANYO be liable for any direct, indirect,
consequential, or incidental damage (including loss of profits,
business interruption, loss of data or the cost of procurement of
substitute goods, technology or services) arising out of the use or
the inability to use the Software (save to the extent that such
liability is not capable of exclusion at law).
General
1. This End-User Licence will be governed by laws of England and
the User may only bring claims in the English Courts and SANYO
shall be entitled to bring a claim in the courts of any jurisdiction.
2. The above terms and conditions supersede any prior agreement,
oral or written, between you and SANYO relating to the Software.
End-User Licence
Your television is fully transistorised and does not contain any user serviceable components.
You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or
even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such
spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can
prevent fire, shock and other hazards.
Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:
■If the power cord or plug is damaged.
■If liquid has been spilt into the television receiver.
■If television receiver has been exposed to rain or water.
■If the television receiver has been dropped or the cabinet has been damaged.
■If the television receiver exhibits a distinct change in performance.
■If the television receiver does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will
often require extensive work by a qualified technician to restore the television receiver to normal operation.
Servicing

3
Do not allow anything to rest on the power
cord. Do not locate this television receiver
where the cord will be damaged by people
walking on it.
Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to protect
it from overheating. These openings must not be blocked or
covered. The opening should never be covered with a cloth or
other material, and the bottom openings should not be blocked
by placing the television receiver on a bed, sofa, rug, or other
similar surface.
Do not place this television near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers).
Do not place the television in direct sunlight.
Do not place your television receiver on an unstable stand, shelf
or table. Serious injury to an individual, and damage to the
television may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions. A special wall mounting kit is available for this model.
Warning To prevent injury, this television receiver must be
securely attached to the wall in accordance with the
manufacturers installation instructions.
If the television is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your television, and can be dangerous.
This television receiver should be operated only from the type of
power source indicated on the television or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.
Never add accessories that have not been specifically designed
for this television.
Do not drop or push objects into the television cabinet slots or
openings. Some internal parts carry hazardous voltages and con-
tact may result in an electric shock hazard. Never spill liquids of
any kind on the television receiver. Do not place items such as
vases containing liquid on top of the TV set.
Do not expose the television receiver to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement, etc.
Do not use immediately after moving
the television from a low temperature to
a high temperature environment, as this
causes condensation, which may result
in fire, electric shock, or other hazards.
Before cleaning, unplug the television
receiver from the wall socket.
Never stand on, lean on or push the
television or its stand. Never allow
children to play with the television or
its stand. Serious injury may result if it
should fall.
Do not apply liquid cleaners or
aerosol cleaners directly onto the tele-
vision receiver. Use a damp cloth for
cleaning.
Do not place candles or hot objects upon the TV, next to it or
behind it. Open flames must never be used near the TV set.
SAFETY
SAFETY PRECAUTIONS PRECAUTIONS
Installation
CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe
the following basic rules for its installation, use and servicing.
R/D
L/S
MINIMUM DISTANCES
10cm
10cm
10cm
5cm
Use

4
● Cleaning your LCD screen.
Your LCD screen is coated in a non reflective film. Damage to
this film will result in possible discolouration. Any scratches will
not be repairable.
Clean your screen with a soft cloth, only rub lightly, do not use
detergents.
Do not stick anything to the screen, use solvent or alcohol
based cleaners, hit the screen with a hard object or rub the
surface hard.
● Placement of your LCD TV.
Table top stand
This LCD TV is supplied with a table top stand fitted.
Wall mounting bracket
An optional wall bracket is available for your LCD TV. Before you
consider wall mounting this TV, check that you have an appropri-
ate wall made from solid materials such as concrete or bricks.
You will have to remove the table top stand to use this.
SAFETY
SAFETY PRECAUTIONS PRECAUTIONS
Important:
This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains
a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.
Care of your product Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please dispose of this equipment at your
local community waste collection/recycling centre.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we
live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.

5
1. Connect your aerial cable socket to the back of the TV set. Fit the
aerial cable as shown or as shown below when AV equipment is
connected.
● Connecting DVD / VCR player/ Satellite receiver or
Set top box.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connec-
tion. For further information please consult your local dealer.
2. Connect the power cord of the LCD TV to a wall outlet.
✐ As this product does not have a mains On/Off switch, please
ensure your mains plug is easily accessible.
✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz. To
disconnect completely from the mains or, when the TV set is not to
be used for an extended period of time, it is advisable to discon-
nect the power cord from the power outlet.
✐For all aerial problems please consult your local dealer.
1. HDMI (High Definition Multimedia Interface)
This TV set has an HDMI connector. When connected to the HDMI
source and HDMI is selected using the remote control,There is a short
time period before the picture appears at a much higher resolution.
This connection is located at the back of the TV set as shown below.
2.If you want to connect a DVD player with a DVI adaptor connection
cable,please ensure the sound is connected to L/S andR/D connec-
tions. Refer to diagram above.
DVI-I Format will only work carrying a Digital signal.
3. Y,Pb,Pr connection
This TV set has Y, Pb, Pr. You can connect your DVD player to these
terminals instead of using a scart lead as indicated below. This can
support high definition in analogue component form.
Install two "AAA" 1.5 volt batteries so that the "+" and "-" marks on
the batteries match the "+" and "-" marks inside the unit into the
remote control handset.
INST
INSTALLA ALLATION TION
Step : 1 Connections ( Essential)
DISH
IN
For satellite
only
Set top box
or
Satellite
AV1
AV1
OUT
IN
VCR TV
DVD
As indicated
above
AC Mains Outlet
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
HDMI
HDMI
L/S
L/S
R/D
R/D
3
HDMI
HDMI
L/S
L/S
R/D
R/D
AV1
AV2
AV3
1
2
Step : 2 Remote control battery installation
+
-
+
-

6
The LCD TV will have a red Standby light to
show there is power.
The following screen will appear before Plug and Play will start.
Using your remote control, press the eor dbutton to highlight the
Country option. Select UK using the 7or 8button. Press the eor
dbutton to highlight the Start option and press the 8button to
begin the self-automatic tuning system called Plug and Play.
The TV scans the analogue channels first and then switches to digi-
tal channel mode and scans digital channels. This could take up to
15 minutes. During automatic tuning, the TV displays the tuning sta-
tus of analogue and digital channel tuning on the screen.
Now the installation is complete!
After Plug & Play, Digital channels are stored in the programme
positions shown in the All channel table.
Analogue channels will be automatically sorted as follows:
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4 or S4C
Programme position 5 : CH5
Programme position 6 : ITV2
Programme position 7 : channels in order found.
✐ If any other channels are available in your reception area, the
remaining channels will be stored from programme position 7 in
sequence as found.
✐ If you move to another city or cable is installed, please follow the
description “Channel List - scan for channels”. (on page 13) or
“Preset Menu” (on page 17/18) for Analogue channels.
✐ This procedure only appears the first time you switch on.
1a. Control Buttons on TV
Press the 5or 6button to increase or decrease the programme
position.
Press the 1 or 2button to increase or decrease the sound
volume.
Press the Time out button to freeze the picture and start recording
current live program
Press the stop button to cancel the time out function or stop playing
a disc.
1b. The Power light and HDD light are shown here. The Power light
displays Red and the HDD light displays Orange when Time out or
Replay are active,. The HDD light displays Red when Recording and
Green when Replaying.
2. Left side terminals
✐ To select the AV4 mode press the vbutton repeatedly.
✐ When the headphones are inserted the sound from the TV
speakers is muted.
PC Connection
This TV set has a PC connector.You
can connect a PC to the LCD TV and
use it as a monitor if required.
This connection is located on the side
terminal above the AV4 Video and Audio
sockets
3.5 mm Mini Headphone din
AV4 Video in
AV4 Left Audio in
AV4 Right Audio in
R/D
L/S
Step : 3 Switching on / Plug & Play
Thank you for purchasing your SANYO TV.
Now I am searching and storing all
programmes.
Please wait.
Channels found
The scan will take approximately 3 minutes
In progress RET Stop
Scan for channels
35
Terminals
INST
INSTALLA ALLATION TION
Time outTime out
StopStop
-
+
P
PC input
PC
I
IN
AV4
Time out
Time out
Stop
Stop
-
+
P
1b
Standby switch
Autostore
Country UK
Start
: Select : Adjust MENU : Exit

7
D/A selector
To switch between analogue (TV)
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Mute
Standby/Power on/off
To switch the TV on and off. Also see page 19.
and digital channels (DTV).
TV/AV switch
To switch from Digital TV, AV1, AV2, AV3, AV4
AV5 YPrPb, PC, HDMI or TV mode press repeatedly.
Screen mode selector
To select the screen mode, Auto, Natural,
Zoom14:9, Title In 14:9, Zoom 16:9,
Title In 16:9, Full or Normal.
Subtitle
Displays sub titles On and Off.
You may need to switch to title in by pressing
WIDE button. See page 25.
Guide
To call up the Digital TV schedule guide display on
the screen. (refer to page 14).
Picture mode selector
To access a series of picture modes:
Personal, Dynamic, and Standard or ECO.
Volume up/down
To adjust the sound level.
Return
Returns back to previous screen
in menu. Exits interactive mode.
OK
To save the setting in the menu,
or to call up the All channel table.
Bass selection
To get an emphasised bass sound, On or Off.
Coloured buttons
Some channels have interactive services.
Use the red button to enter and other colours
as directed. Also used in menu functions
N/A
System selector
To select the colour system in the AV mode,
Auto, PAL, NTSC or SECAM.
Programme up and down
To select the next programme number or
previous programme number.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons for example
for channel 23, press 2 and 3 numeric
buttons.
MENU
To switch on the screen display menu on/off.
See page 8.
Cursors
To select the sub menu items in the
menu display, Up, Down, Left, Right.
Surround mode selector
To select the surround mode, Off, Mid, Max.
INFO
Shows the current and next programme on
the selected channel. (refer to page 14).
REMOTE CONTROL
REMOTE CONTROL - Digital Use - Digital Use

8
DIGIT
DIGITAL AL OPERA OPERATION TION
The main menu screen takes you to many
functions in the TV. The buttons below are
the main buttons and their uses.
MENU button - Enters and exits menus.
Cursors eand dmoves up and down in
each selected menu.
Cursor 7 8
Re-locates cursor bar to top
or bottom of main menu.
OK button save settings or enters next
menu.
RETURN button - Returns to the previous screen.
Refer to the bar at the bottom of the screen for added help in which
buttons to use.
1. Press the MENU button and select Picture using the eor d
buttons.
2. Press the OK button to select.
3. Select Brightness, Contrast, Colour etc. using the e, dbuttons and
adjust using the 7, 8buttons to obtain the best picture settings for
your environment.
Press the MENU button to return to Main Menu. These settings
automatically store when you exit the menu.
Press the MENU button and select Sound using the eor d
buttons, press the OK button to enter.
Select and adjust to obtain the best sound settings for your environ-
ment using the e, dand 7, 8buttons.
Press the MENU to return to Main Menu. These settings automatically
store when you exit the menu.
Press the MENU button to exit menu.
You can re-organize the channel list to allow quick access to your
favourite channels.
Press the MENU button and select Channel organizer using the e
or dbuttons.
■ Remove a channel.
1. Highlight a channel to be removed.
2. Press the Red button an inset window will appear.
✐ Red button refers to coloured buttons Red, Green, Yellow and
Blue. Do not get confused with larger Red Standby button.
3. Press the OK to confirm deletion of the the chosen channel.
4. Press the Return button to exit.
■ Move selection.
To change the order of channels in your list.
1. Select the channel you wish to move using the eor dbuttons.
2. Highlight the channel by Pressing the Green button to select.
3. Use the eor dbutton to move to a different position
4. Press the Green button to save the new order.
Repeat steps 1-4 until all channels are in the order you need.
5. Press the Return button to exit.
Picture menu
Sound menu
Channel Organizer
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
* * *
_
Main Menu
Main Menu
Picture
Sound
Channel organizer
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
Main Menu
Installation
Main menu
Picture
: Select : Adjust MENU : Back
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Min / Auto/
OFF
Dyn. skin tone ON / OFF
Text Brightness Min/ Mid / Max
/Max
Sound
Volume
Balance
Bass
Treble
Preset Personal / Talk / Music / Normal
Surround OFF / Mid / Max
: Select : Adjust MENU : Back
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
Confirm
? Do you want to delete.
OK RETURN Cancel
* * *
_
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save

9
DIGIT
DIGITAL AL OPERA OPERATION TION
■ Swap channels.
1. Choose a channel that you wish to swap with another by pressing
the eor dbuttons . Press the Yellow button to enter the Swap
screen.
2. Use 7, 8and numeric buttons to enter channel number and
press the OK button to swap.( When in swap screen you can
press the RETURN button repeatedly to take you back a screen).
3. Press Return to exit.
4. Press the MENU button again to return to normal picture.
■ Favourites Mode
1. In Channel Organiser you can select channels to put in a
favourites mode. Using the 8
button you can select the channels
you want, a tick will appear near the selected channels.
2. Press OK to save your settings.
3. To activate the favourites mode exit out of menu. Press 7or 8
button on the remote control, a window will appear to show that
favourite mode has activated.
4. To check the channels selected on favourite mode press OK on
the remote control and the channels will be displayed. To deactivate
the favourites mode and return to Normal mode press the 7or 8
button and thiis will actvivate Normal mode.
The first time you use this function the code numbers are 0 0 0 0.If
you forget the code,reset the digital Configuration and enter the
default code (0 0 0 0 ).
● How to change the code to your own preference.
1. Press the MENU button to select Main Menu.
2. Using the eor dbuttons select Configuration and press the OK
button to enter.
3. Press the dbutton to select Change parental code. Press the
OK button to enter.
4. Enter the Old code in the box that is highlighted, using the 0-9
numeric button
5. Enter the New code in the next box that is highlighted, using the
0-9 numeric buttons.
6. To Confirm the new code, Enter the New code again in the last
highlighted box.
7. A prompt Save new code will appear. If you are happy with the
new code press the OK button to return to the Main Menu
✐ Press the RETURN button repeatedly to return to Main Menu at
any time
Press the MENU button to return to normal picture.
■ To activate parental lock.
1. Press the MENU button to select Main menu.
2. Using the e
or dbuttons select Parental lock. Press the OK
button to select.
1 BBC ONE All Channels
Main Menu
Main Menu
Picture
Sound
Channel organiser
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
Main Menu
* * * _
?Enter code to activate
parental lock
* * *
* * *
_
Main Menu
Main Menu
Main Menu
_
* * *
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
?
Swap
_
Main Menu
Main Menu
Main Menu
Configuration
Preferred language
Change parental code
Common interface
Parental lock
CHANGE PARENTAL CODE
Old code
New code
Confirm new code
* * * *
- - - -
- - - -
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
i Favourite mode activated
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
Confirm
? Do you want to save.
OK RETURN Cancel
i Normal mode Activated

10
DIGIT
DIGITAL AL OPERA OPERATION TION
Deactivate parental lock
OK Select RET Cancel
!
Configuration
Prefered language
Change parental code
Common Interface
Reader 1: Interface card
OK Select RET Cancel
Common Interface
C I
CI CARD
3. Enter your code and press the OK button to save. Only the cor-
rect code will activate this feature! repeat 1-3 again if wrong code
is entered.
✐ Parental lock is now activated you will now have to enter the code
every time you wish to enter the Main menu unless parental lock
is deactivated.(See below)
● Blocking access to selected channels.
1. Press the MENU button to select Main menu.
2. Using the eor dbuttons select Channel organizer. Press the
OK button to enter.
3.Using the eor dbuttons select a Channel you wish to lock.
4.Press the Blue button, a locked symbol will appear to show it is
selected. To de-select press the Blue button again. Repeat until
all channels you wish to lock are selected.
5.To set the Channel lock, press the OK button to Save. Press the
Return button to return to the main menu.
✐ The channel lock will only be activated when parental lock is in
use.
● How to watch a locked channel.
1. Select a locked channel, This parental lock display appears.
2. Enter the Numeric Parental code.
3.The display will disappear and the normal channel picture will
appear,
4. The channel is now temporarily unlocked and may be watched
until the channel is changed.
✐ If Parental lock is activated and you wish to record this locked
channel, deactivate first before setting timer recording.
● How to deactivate parental lock
1. Press the MENU button to select Main menu.
2. Using the eor dbuttons select Parental code. Press the OK
button to enter menu function.
3. Using the numeric buttons enter the parental code.
4. The inset display will disappear.
5. Main menu screen will now show Parental Unlock.
6. Press the MENU button or Return to exit to normal picture
✐ Once you have de-activated Parental Lock,all channels will be
available.
Main Menu
Main Menu
Main Menu
Picture
Sound
Channel organiser
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
?Enter code to deactivate
parental lock
* * *
* * *
_
* * * _
Main Menu
Main Menu
Main Menu
_
Enter code to watch a
locked channel.
* * *
* * *
.
Main Menu
Main Menu
Picture
Sound
Channel organiser
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
Main Menu
1 BBC ONE
2 BBC TWO
7 BBC THREE
30 CBBC
40 BBC NEWS 24
CH. No. Channel name
CHANNEL ORGANIZER
Favourite Remove Move Swap Lock OK Save
Favourite Lock
* * *
_
Channel Lock
Main Menu
Main Menu
* * * _
* * * _
Main Menu
Main Menu
Picture
Sound
Channel organiser
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
Main Menu
Main Menu
_
Parental Lock
Main Menu
Main Menu
* * * _
* * * _
Main Menu
Main Menu
Main Menu
Picture
Sound
Channel organiser
Parental lock
Configuration
Installation
Technical information
Off Timer
TV settings
Main Menu
_

11
Lock channels
Channel list
Scan for channels
Lock channels All channels
BBC ONE



BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
Sky Travel
UK History
Ch 14
CH 15
QVC
TV Travel Shop

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

OK Save
Parental lock
Y
Channels found


The scan will take approximately 3 minutes
In progress RET Stop
Scan for channels
0
DIGIT
DIGITAL AL OPERA OPERATION TION
Signal information
Technical information
Software upgrade
Product data
Reset
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
Signal strength (%) 34
Bit error rate
Uncorrected errors/sec
OK Select RET Cancel
Signal information
Looking for new version.......
RET Cancel
Software upgrade
Reset receiver configuration?
RET Cancel
!
Confirm
R
Product LDITPGFTG_01_00
Software 1.9.76 build jun 25 2003 16:10:15
Resourse 1.26.3
Boot 2.4.0
RET Cancel
Product data
● Preferred language.
1. Press the MENU button to select Main Menu.
2. Select Configuration by using the eor dbuttons. Press the OK
button to enter.
3. Press the dbutton to highlight Preferred language and press
the OK button to enter.
Audio - Select your preferences as required.
Example. If you speak Welsh or Gaelic and prefer to receive
Welsh or Gaelic audio when it is transmitted then select Welsh or
Gaelic for your first Language and English as your second.
4. Press the 7
or 8button to select Language, press the eor d
buttons, select second language and change your preference
using the 7
or 8buttons.
Subtitling - Select your preferences as required.
If you wish for Welsh or Gaelic Subtitles instead of English to be
shown (when available) then select your preference for the first
language.
Example: as shown will give you English first language, if not
available Welsh may be shown.
5. To change press the eor dbuttons to highlight the box and
press the 7or 8buttons to select your preferred First language
and repeat for Second language.
6. Press the dbutton to select Subtitle display. This can be set ON
or OFF by pressing the 7or 8buttons.
7. Press the OK button to Save.
The above display bar will appear on the screen as it is returned to
the normal TV picture.
● Common Interface
This TV set provides a common Interface slot on the top rear of the
TV set behind the control buttons. .
1. Press the MENU button to select Main Menu.
2. Select Configuration by using the eor dbuttons. Press the OK
button to enter.
3. Press the dbutton to highlight Common Interface and press the
OK button to enter.
The following screen appears to show that a card is inserted.
When you select OK, follow the on screen directions. This will vary
depending on the type of card inserted.
Important!
The TV should be turned off by the Mains Power switch when insert-
ing or removing the Common Interface Card, otherwise it may cause
damage to the card or the TV set.
● Preferred Setup
1. Press the MENU button to select Main Menu.
2. Select Configuration by using the eor dbuttons. Press the OK
button to enter.
3. Press the dbutton to highlight Preferred Setup and press the
OK button to enter.
4. Press OK on the remote to Select MHEG5 for Digital Teletext or
Select Subtitles for on screen subtitles by using the eor dbut
tons.
5. Select OK to save your preferred setting and exit the menu. On
exiting the menu screen a message appears showing that the set
tings chosen have been activated.
6. The message on screen for Subtitles will read Priority set to DVB
setup
Configuration
Configuration
Preferred language
Change parental code
Common interface
LANGUAGE CHOICE
Audio
First language
Second language
Subtitling
First language
Second language
Subtitle display
Welsh
English
Welsh
English
0ff
Navigate OK Save RETURN Cancel
LANGUAGE CHOICE
LANGUAGE CHOICE
OK Information RETURN Cancel
Cam. Module :- Top Up TV
CI
Card
P
TIME OUT STOP
i Your modifications are saved
i Priority Set to MHEG
i Priority Set to DVB Subtitle

12
DIGIT
DIGITAL AL OPERA OPERATION TION
1 (not set) --/--/-- --:-- --:-- (not set)
2 (not set) --/--/-- --:-- --:-- (not set)
3 (not set) --/--/-- --:-- --:-- (not set)
4 (not set) --/--/-- --:-- --:-- (not set)
5 (not set) --/--/-- --:-- --:-- (not set)
6 (not set) --/--/-- --:-- --:-- (not set)
7 (not set) --/--/-- --:-- --:-- (not set)
8 (not set) --/--/-- --:-- --:-- (not set)
9 (not set) --/--/-- --:-- --:-- (not set)
10 (not set) --/--/-- --:-- --:-- (not set)
11 (not set) --/--/-- --:-- --:-- (not set)
12 (not set) --/--/-- --:-- --:-- (not set)
Edit/Add event
OK Delete
RCancel
RET
Current events
Channel Date & time End
BBC ONE
17/07/03
10:52
OK Save RET Cancel
Set event
Channel
Wake-up day
wake-up time
Finish time
Repeat
11:28
No repeat
Event #1 is due to start in 4
minutes. Press YELLOW to switch
now. GREEN to switch on time.
RED to delete the event .BLUE to cancel.
?
Delete
RDue GNow YCancel B
■Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time period has elapsed.
Press the MENU button to select main menu.
Press the eor dbuttons to select Off timer. Press the OK button
to enter menu (Setting / Off timer).
Select your desired time by pressing the 7
or 8button.
The time changes in 5 minute steps. The maximum time is 2:00hrs.
When Off timer has been set the time will show briefly on the screen
with the remaining time.
Press MENU button or RETURN button repeatedly to return to
normal TV picture.
✐ If the TV set is switched off by the Mains Switch 4 and by using
the Power button on the remote control, or during Autosort, the
timer settings will be cancelled.
■Alarm timer
1. Press the MENU button. Select Off timer using the eor dbutton
press the 8button to enter and select timer.
2. Select Alarm-Timer using the eor dbutton.
3. Press the 7or 8button to change time.
The time changes in 1 minute steps.The maximum time is 180 mins.
To cancel the alarm, press any button and the display will disappear.
✐ If the TV set is switched off by the standby button 4 on the
remote control or by the standby switch 4 on the top of the TV
set the timer settings will be cancelled.
● Scan for channels
1. Press the Menu button to select Main Menu.
2. Select Installation by using the eor dbuttons. Press the OK
button to enter.
1. Select Manual or Auto scan by using the eor dbuttons. Press
OK button to enter.
2. Using the eor dbuttons, this screen will allow you quickly to
tune into any Channel multiplex emitted by the Transmitters in
your area.
3. Press the OK button to scan.
✐ Only those channels showing appreciable signal strength are suit-
able for viewing.
1. If Auto Scan is chosen, when completed, all channels are saved
automatically.
✐ Parental lock is still saved after the scan for channels has been
initialised.
Off Timer menu
Timer
: Select : Adjust MENU : EXIT
Off Timer 5~ 120
Alarm Timer OFF
Installation
SCAN FOR CHANNELS
Channel(s) found: 0
This scan will take approximately 3 minutes.
In progress... RETURN Stop
Main Menu
Main Menu
Main Menu
Manual Scan
Auto Scan
i
Installation
Installation
MANUAL SCAN
Navigate OK Scan RETURN Cancel
Band width (MHz) 8
Band width (MHz) 8
Channel number CH-21
Channel number CH-21
Frequency (kHz) 474000
Frequency (kHz) 474000
Signal strength
Signal strength
Manual Scan
Auto Scan
Timer
: Select : Adjust MENU : EXIT
Off Timer OFF
Alarm Timer 1 ~180

13
DIGIT
DIGITAL AL OPERA OPERATION TION
In this section a lot of the information will only be useful to a
technician. Some parts are however useful to you. If there is
an upgrade in software you will need this section to upgrade
your TV from time to time.
1. Press the Menu button to select Main Menu.
2. Select Technical Information menu by using the eor d
buttons. Press the OK button to enter.
3. Select Signal information by using the eor dbuttons
and press the OK button to enter.
This screen cannot be altered but if you have a problem you
may need to refer to this screen for some data.
4. Press the Return to go back to Technical information
screen.
■ Software upgrade
1. Press the dbutton to select Software Upgrade screen.
Press the OK button to enter.
This looks for any new software upgrades that maybe trans-
mitted at any time.
2. Press the Return button to go back to Technical informa-
tion screen.
3. Select Product Data by using the eor dbuttons and
press the OK button to enter.
This is useful to service engineers.
4. Press the Return button to go back to Technical informa-
tion screen.
5. Press the dbutton to select Reset screen. Press the 8
button to enter.
If you press Red button to confirm it will return all settings to
factory (default) mode for digital channels. To start a scan for
all available channels switch the TV set Off and On again or
run auto scan
■Child lock
You can prevent small children from operating the TV
with the front buttons of the TV set.
Press the MENU button to select main menu.
Press the eor dbuttons to select TV settings. Press
the OK button to enter menu (Setting).
Press the eor dbuttons to select Child lock. Child
lock can be set to ON or OFF. Press the 7or 8but-
tons to select.
Press the MENU button repeatedly to exit menu.
The child lock mode will be reset to “OFF” when the
TV set is switched off with the Mains ON/OFF 3
switch.
■ Timer menu
Select timer menu by using the 8button from the TV
setting menu. On the timer menu OFF timer and Alarm
timer can be used (see page 12 and 17)
■ Setting of AV2 input mode
If you use a VCR which has S-VHS, you should con-
nect it to AV2 and change the AV2 menu to S-VIDEO.
Press the MENU button to select main menu.
Press the eor dbuttons to select TV settings. Press
the 8to enter menu (Setting, as shown above).
Press the dbutton to select AV2 and select VIDEO or
S-VIDEO by pressing the 7
or 8buttons.
Press the MENU button or the RETURN button twice
to return to normal TV picture.
Technical Information
Technical information
Signal information
Software upgrade
product data
Reset
7: BBC THREE (FTA)
Network : Crystal Palace
Provider : <not available>
Frequency (kHz) 506000 - Band width (MHz) 8
Video none - Audio none - PCR none - SUB none
Channel number 25
Signal strength (%) 34
Bit error rate 6.23e+08 bps
Uncorrected errors/sec 0 packet(s)
Signal information
Software upgrade
Looking for new version.......
Return Cancel
OK or
Reset digital configuration
?
Cancel
Return Confirm
Product data
Hardware version :1.0
Software version : ADID0324
Build on : Jan 07 2006 at 09:01:43
TV Setting menu
Setting
: Select : Adjust MENU : Back
CHILD LOCK OFF / ON
Timer
AV2 Video / S-Video

14
The guide shows the digital TV channel schedule for the next 7
days.
1. Press the guide button on your remote control.
2. A schedule will appear on the screen.
3. Use the eor dbuttons to move up and down the program list.
Use the 7or 8buttons to show the daily program schedule lists.
4. Press the OK button to get more information on the programme
you have selected. The program selected will be highlighted
yellow.
5. To set recording see Timer recording below
- This feature is used when you wish to record a digital channel on
your Hard disk recorder.
- In order to record digital channels you cannot watch another digital
channel when recording.
- Timer recording will switch your TV set to the digital channel at the
preset time until the finish time is reached.
- Whilst timer recording is running you can switch to Analogue TV.
- You can also switch your TV into Standby mode.
✐If channel has been locked (Parental lock) and you have set timer
record for locked channel it will not record. You have to deacti-
vate parental lock first.
1. Press the Guide button to set recording.
2. Press the RED button to select set recording
3. ASet events screen will appear.
4. Select channel by pressing the 7
or 8buttons and rotate
through all available channels.
5. Press the dbutton to select Wake-up day box. Enter your day,
month and year by using numeric buttons (0-9). and using the 7
or 8buttons to move left and right.
6. Press the dbutton to select Wake-up time box. Enter your time
by using numeric buttons (0-9). and using the 7
or 8buttons to
move left and right.
7. Press the dbutton to select Finish time box. Enter your time by
using numeric buttons (0-9). and using the 7
or 8buttons to
move left and right the time you wish to finish.
8. Press the dbutton to select Repeat box. Press the 7or 8but-
tons to enter No repeat, daily, or weekly. This would be a useful
feature if you have a favourite programme that you dont want to
miss and it is shown on a daily or weekly schedule.
9. Press the OK button to save settings, you can repeat again or
press the RETURN button to go back. Once the OK button is
pressed, the HDD Timer Record menu appears with the preset
data added from the Set Events saved settings.
10. The entered settings can be changed such as the Date/Time/
Duration/ Program. Once the settings have been entered using the8
button move to Save/ Cancel. Once the seetings have been Saved/
Canceled using the OK button, the Playlist menu appears on
screen to exit press the Timer REC button.
When you press the info button in digital mode you will be displayed
a window showing all the channels available.
The channel you want info on will be highlighted yellow and will be
viewed on the right side of the displayed window.
Press the eor dbuttons to select current channel information.
Press the Green button to show information on the following pro-
gram.
Press the Blue button to bring up the weekly program guide.
Press Return on the remote to exit the info window.
From time to time upgrades will become available. When this hap-
pens the following screen appears.
To upgrade press the OK button and the following screen will
appear.
Press the OK button to start, this automatically downloads for you.
The following screen appears.
The following screen appears to show that the upgrade is nearly fin-
ished. Once this screen disappears the upgrade is complete.
DIGIT
DIGITAL AL OPERA OPERATION TION
Guide
EPG
EPG
[NOW]
[NOW]
09:30, 26 JAN 2006
09:30, 26 JAN 2006
Navigate Set Recording Next Weekly
1 BBC ONE
2 BBC TWO
3 ITV1
4 CHANNEL 4
5 FIVE
6 ITV2
[11:30 - 12:00, Five News] National and International News. [S]
‘ Info’ button
Programme Download
Do you want to download
the latest software.
?
CancelReturnOK Confirm
Software update from AIR
Please wait.....
Loader Version
Hardware Version
Version
Total Size
Size Collected
Software update from AIR
Downloading Application Software...
Loader Version
Hardware Version
Version
Total Size
Size Collected
2.02
1.00
1.01
883332
4068
Software update from AIR
In progress....
Fusing into FlashROM
PLEASE DONT SWITCH OFF THE TELEVISION
If it takes longer than 20 minutes,
Contact your television supplier
Once you have started the upgrade process you must not inter-
rupt it (disconnect or separate it from the mains supply) under any
circumstances. Do not press any key on the remote control or the
top of the cabinet. If you interrupt the upgrade process the IDTV
may be defective afterwards.
Timer Recording
SET EVENTS 00:06, 01 Jan 2006
Channel name BBC THREE
Wake-up day 01/01/2006
Wake-up time 00:05
Finish time 00:36
Mode Once
Navigate OK Save RETURN Cancel
ID Date Start Duration Mode Program
Move Change 0-9 to set data
2
05/04/ 06 19:00:00 : 45 HQ D
SAVE CANCEL

15
■ DVD controls
With selected Sanyo DVD players you can use this remote. The fol-
lowing table shows all available function buttons for the DVD. When
you use a compatible Sanyo DVD player, first press and hold the
DVD button and then press your desired function button.
REMOTE CONTROL
REMOTE CONTROL - - Analogue Analogue
D/A selector
To switch between analogue (TV)
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Mute
Standby/Power on/off
To switch the TV on and off. Also see page 19.
and digital channels (DTV).
TV/AV switch
To switch from Digital TV, AV1, AV2, AV3, AV4
AV5 YPrPb, PC, HDMI or TV mode press
repeatedlyPress and hold, few seconds AV selection
bar appears. Select mode by using .
Screen mode selector
To select the screen mode, Auto, Natural,
Zoom14:9, Title In 14:9, Zoom 16:9,
Title In 16:9, Full or Normal.
Picture mode selector
To access a series of picture modes:
Personal, Dynamic, and Standard or Eco.
Volume up/down
To adjust the sound level.
OK
To save the setting in the menu,
or to call up the All channel table.
Bass selection
To get an emphasised bass sound, On or Off.
System selector
To select the colour system in the AV mode,
Auto, PAL, NTSC
Programme up and down
To select the next programme number or
previous programme number.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of analogue
programme position 10 - 99, for example 23,
first press -/-- button and press
2 and 3 numeric buttons.
MENU
To switch on the screen display menu on/off.
See page 8.
Cursors
To select the sub menu items in the
menu display, Up, Down, Left, Right.
Surround mode selector
To select the surround mode, Off, Mid, Max.
CS button
Press the button once to scan through all
current channels already tuned in. Press
again to cancel.
Nicam / Bilingual selector
To switch the sound mode as follows; NICAM or MONO
in the stereo programmes. A or Bin the bilingual
programmes. If the nicam or stereo sound reception is
poor in quality, you can switch to MONO sound reception
by pressing A•B button. This operates only analogue
channel mode.
Teletext / TV selector
To switch TV, MIX and Teletext mode.
keys
Power
Play
Pause
Stop
Next chapter selection
Previous chapter selection
n/a
DVD command mode selection
DVD (blue symbols)
DVD
OK
Enter
Cursor selection

16
Many of your TV’s functions are controlled through the menu function.
During menu operation the bottom of the screen show which controls
can be used.
Press the ubutton to enter and exit the 4 sub menus Sound,
Picture, Setting and Preset.
When a sub menu is selected its background shows white.
When you have set a Sub menu you can press the MENU button to
exit. Using the eor dbutton you can select any of the sub menu’s.
Press the MENU button and select Sound menu by pressing the
eor dbutton.
Press the 8button to enter.
Select and adjust to obtain the best sound settings for your environment
using the eor dbutton and the 7or 8button.
Sound Preset : You can select between Music, Talk, Normal or
Personal.
2. Surround : Use 7or 8 to select level of surround sound required
OFF / Mid or Max.
To exit press MENU button.
1. Press the MENU button. Select Picture using the eor dbutton.
Press the 8button to enter.
Set the picture settings for your “personal” preference.
Use the eor dbutton to select eg. Brightness and the 7or 8
button to adjust levels.
Tint : is only available if NTSC equipment is connected.
Preset : You can select either your “Personal” settings,Dynamic,
Standard or ECO
To exit press the MENU button.
■Noise Reduction
1. Press the MENU button. Select Setting using the eor dbutton.
Press the 8button to enter.
2. Select Noise Reduction using the eor dbutton.
3. Set to MId, Max, Auto or Min by pressing the 7or 8button.
4. Press the MENU button to exit.
■Dynamic Skin tone
1. Select ON or OFF using the 7or 8buttons.
2. Select ON and the tone of the picture will change to a pink
colour.
3. Select OFF and the colour tone will return to normal settings.
■Text Brightness
This may be adjusted by using the 7or 8buttons to select between
Min/ Mid/ Max.
To Exit press the Menu button
✐ Your personal settings are automatically saved when you exit the
menu.
■Child lock
You can prevent small children from operating the TV with the buttons
on the top of the TV set.
1. Press the MENU button. Select Setting using the eor dbutton.
Press the 8button to enter.
2. Select Child lock using the eor dbutton.
3. Set the Child lock to Off or On by pressing the 7or 8button.
✐ The child lock mode will be reset to “Off” when the TV set is
completely disconnected from the Mains supply.
4. Press the MENU button to exit.
MENU OPERA
MENU OPERATION - TION - Analogue channels Analogue channels
Volume
Balance
Bass
Treble
Preset Personal / Talk/ Music / Normal
Surround Mid / Max / OFF
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / Eco
Noise Reduction Mid / High / Auto / Low / OFF
Dyn. Skin Tone ON / OFF
CHILD LOCK OFF
Timer
AV 2 Video / S-Video
Program Sort (Program sort) - MOVE / DELETE
Program pos.
Program name
Autosort
Frequency
Skip ON/OFF
Text Brightness Min / Mid / Max
Country
Memory OK? / OK
Main Menu
Sound
Picture
Setting
Preset
: Select : Adjust MENU : Exit
Sound menu
Sound
Volume
Balance
Bass
Treble
Preset Personal / Talk / Music / Normal
Surround OFF / Mid / Max
: Select : Adjust MENU : Back
Picture menu
Picture
: Select : Adjust MENU : Back
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Min / Auto /
Max
Dyn. skin tone ON / OFF
Text Brightness Min/ Mid / Max
Setting menu
Setting
: Select : Adjust MENU : Back
CHILD LOCK OFF / ON
Timer
AV2 Video / S-Video

17
■AV2 setting
In setting menu, to select AV2 press the 8button and set to Video
or S-Video depending on your external equipment. If you use a VCR
which has S-VHS, you should connect it to AV2 and change the AV2
menu to S-VIDEO.
1. Press the MENU button. Select Setting using the eor dbutton
press the 8button to enter.
2. Select AV2 using the eor dbutton.
3. Press the 7or 8button to select which Video or S-Video.
4. Press the MENU button to exit, this automatically stores your
changes.
■Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button. Select Setting using the eor dbutton
press the 8button to enter.
2. Select Timer using the eor dbutton and then select OFF Timer
using the eor dbuttons.
3. Press the 7or 8button to change time.
The time changes in 5 minute steps.The maximum time is 2:00hrs.
If you have set the off timer, a display appears in the corner of the
screen.
✐ If the TV set is switched off by the standby button 4 on the
remote control or by the standby switch 4 on the top of the TV
set the timer settings will be cancelled.
4. Press the MENU button to exit.
■Alarm Timer setting
The Alarm-timer will sound the alarm for 15 secs, when the selected
time has elapsed.
1. Press the MENU button. Select Setting using the eor dbutton
press the 8button to enter and select timer.
2. Select Alarm-Timer using the eor dbutton.
3. Press the 7or 8button to change time.
The time changes in 1 minute steps.The maximum time is 180 mins.
To cancel the alarm, press any button and the display will disappear.
✐ If the TV set is switched off by the standby button 4 on the
remote control or by the standby switch 4 on the top of the TV
set the timer settings will be cancelled.
4. Press the MENU button to exit.
The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
1.Press the Menu button
2. Select Preset using the eor d. Press the 8button to enter
● Program sort
This is used to preset a received channel in any desired programme
position.
Use the ed or 78 buttons on your remote control to move to
selected program numbers. The number you have selected will be
highlihted yellow.
To move a program number press the Green button on your remote
and use the ed or 78 buttons to place it where you want it
moved to.
To delete a program select the number and press the Red button on
your remote to Delete it
■Program Name.
With this feature individual channels may be numbered or renamed
by using the 7or 8buttons. Using the 5or 6buttons. Press
the 8button, the first character space will be highlighted. Press the
5 or 6 buttons until the number or first letter you require
appears (0-9, A-Z, a-z, ?, !, -, +). Press the 8button to select the
second character.
You can assign 7 characters of information. When finished press the
8button repeatedly until no character is highlighted.
MENU OPERA
MENU OPERATION TION
Setting menu
Setting
: Select : Adjust MENU : Back
CHILD LOCK OFF / ON
Timer
AV2 Video / S-Video
Preset menu
Preset
: Select : Adjust MENU : Back
ProgramSort
Programpos.
6
Program name
Auto sort
Frequency 495.25 MHz
Skip
Memory OK? / OK
ON / OFF
Country UK
Program sort
1 6 11
2 7 12
3 8 13
4 9 14
5 10 15
Move Delete
Timer
: Select : Adjust MENU : EXIT
Off Timer 5~ 120
Alarm Timer OFF
Timer
: Select : Adjust MENU : EXIT
Off Timer OFF
Alarm Timer 1 ~180
Preset
: Select : Adjust MENU : Back
ProgramSort
Programpos.
6
Program name
Auto sort
Frequency 495.25 MHz
Skip
Memory OK? / OK
ON / OFF
Country UK

18
● AutoSort
1. Press the MENU button. Select Preset using the eor dbutton.
Press the 8button to enter.
2. Select Auto sort by using the eor dbutton. Press the OK but-
ton to enter.
3. As soon as the OK button has been selected Scanning will
automati
cally begin.
4. The channel frequency will change and the channels will be stored
in numeric order once found.
All available channels will be automatically stored, starting from posi-
tion 01.
● Frequency
The frequency shown will be the frequency being dis
played except when Scanning, then the frequency
shown will change as the scan progresses.
1. To manually Select Frequency by using the 5or 6button.
(Refer to the channel table.)
You can either...
a) Enter the frequency using the 0-9 buttons referring to the
channel table.
b) Press and hold the 7or 8buttons until the frequency starts
scanning (about 5 seconds), scanning will stop when a chan-
nel is found.
Repeat above until the correct channel is found.
2. Press the 5or 6button to select Memory. Press the OK
button to store the new frequency and allother settings.
● Skip
Skip is situated directly beneath Frequency on the screen.
When ‘ON’ it removes access to a channel using the eor dbutton.
The only way that selected channel can be accessed will be by using
the direct channel access keys.
■ Memory.
Memory is situated directly beneath Skip on the screen.
When all the preceding headings under preset have been adjusted to
your satisfaction, using the OK button, change ‘OK?’ to ‘OK’ all the
preset settings will be stored automatically.
MENU OPERA
MENU OPERATION TION
Preset menu
Preset
: Select : Adjust MENU : Back
Program Sort
Program pos. 6
Program name
Frequency 495.25 MHz
Autosort Busy
Skip ON/OFF
Memory OK?/ OK
Country A
Displayed channel no.
C 1    43.25
C 2 A E2 R1 48.25
C 3 A E3 55.25
C 4 B E4 R2 62.25
C 5 D E5 R6 175.25
C 6 E E6 R7 182.25
C 7 F E7 R8 189.25
C 8  E8 R9 196.25
C 9 G E9 205.25
C10 H E10 R10 210.25
C11 H1 E11 R11 217.25
C12 H2 E12 R12 224.25

C21 21 E21 E21 471.25
C22 22 E22 E22 479.25
C23 23 E23 E23 487.25
C24 24 E24 E24 495.25
C25 25 E25 E25 503.25
C26 26 E26 E25 511.25
C27 27 E27 E27 519.25
C28 28 E28 E28 527.25
C29 29 E29 E29 535.25
C30 30 E30 E30 543.25
C31 31 E31 E31 551.25
C32 32 E32 E32 559.25
C33 33 E33 E33 567.25
C34 34 E34 E34 575.25
C25 35 E35 E35 583.25
C36 36 E36 E36 591.25
C37 37 E37 E37 599.25
C38 38 E38 E38 607.25
C39 39 E39 E39 615.25
C40 40 E40 E40 623.25
C41 41 E41 E41 631.25
C42 42 E42 E42 639.25
C43 43 E43 E43 647.25
C44 44 E44 E44 655.25
C45 45 E45 E45 663.25
C46 46 E46 E46 671.25
C47 47 E47 E47 679.25
C48 48 E48 E48 687.25
C49 49 E49 E49 695.25
C50 50 E50 E50 703.25
C51 51 E51 E51 711.25
C52 52 E52 E52 719.25
C53 53 E53 E53 727.25
C54 54 E54 E54 735.25
C55 55 E55 E55 743.25
C56 56 E56 E56 751.25
C57 57 E57 E57 759.25
C58 58 E58 E58 767.25
C59 59 E59 E59 775.25
C60 60 E60 E60 783.25
C61 61 E61 E61 791.25
C62 62 E62 E62 799.25
C63 63 E63 E63 807.25
C64 64 E64 E64 815.25
C65 65 E65 E65 823.25
C66 66 E66 E66 831.25
C67 67 E67 E67 839.25
C68 68 E68 E68 847.25
C69 69 E69 E69 855.25
UHF band

OIRT Channels
CCIR channels
Italian channels
Displayed channel no.
C75 X X 69.25
C76 Y Y R3 76.25
C77 C/Z Z R4 83.25
C78 Z+1 Z+1 R5 90.25
C79 Z+2 Z+2 97.25
C80 S1 S1 105.25
C81 S2 S2 112.25
C82 S3 S3 119.25
C83 S4 S4 126.25
C84 S5 S5 133.25
C85 S6 S6 140.25
C86 S7 S7 147.25
C87 S8 S8 154.25
C88 S9 S9 161.25
C89 S1S S10 168.25
C90 S11 S11 231.25
C91 S12 S12 238.25
C92 S13 S13 245.25
C93 S14 S14 252.25
C94 S15 S15 259.25
C95 S16 S16 266.25
C96 S17 S17 273.25
C97 S18 S18 280.25
C98 S19 S19 287.25
C99 S20 S20 294.25

H21 S21 S21 303.25
H22 S22 S22 311.25
H23 S23 S23 319.25
H24 S24 S24 327.25
H25 S25 S25 335.25
H26 S26 S26 343.25
H27 S27 S27 351.25
H28 S28 S28 359.25
H29 S29 S29 367.25
H30 S30 S30 375.25
H31 S31 S31 383.25
H32 S32 S32 391.25
H33 S33 S33 399.25
H34 S34 S34 407.25
H35 S35 S35 415.25
H36 S36 S36 423.25
H37 S37 S37 431.25
H38 S38 S38 439.25
H39 S39 S39 447.25
H40 S40 S40 455.25
H41 S41 S41 463.25

Vision Frequency [MHz]
CCIR channels
Italian channels
Vision Frequency [MHz]
OIRT  Channels
■ Channel Table
The table below shows the receivable channels and channel
allocation for this LCD TV set.

19
Teletext - This is a free service to give you lots of varied informa-
tion such as news, sports results, weather and travel features.
Teletext reception
If your aerial signal is poor, the teletext reception operation may be
erratic.
Teletext brightness level
You can change the teletext brightness level. Please return to TV
mode.(See Picture menu -Text Bright on page 16).
Sound volume control
In teletext mode sound volume and muting can be controlled.
However they are not displayed on the screen.
■ Switching into / from standby mode
The Standby mode is used for switching the TV set off for short
periods of time. In standby mode the TV is switched off but is
still receiving mains power.
●To turn the TV set into standby mode, press the 4button.
The red power indicator illuminates more brightly.
●To turn the TV set ON from standby mode, press any of the
following buttons: 4 ,
5, 6or
0-9 buttons.
■ Auto shut off
This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the
set will switch off is displayed on the screen.
■ Use of Audio Output Jacks
This TV provides the audio monitor output jacks on the left side
of the cabinet. You can connect your audio equipment to these
jacks to give you sound with your audio equipment.
TELETEXT & OTHER OPERA
TELETEXT & OTHER OPERATION - TION - Analogue channels Analogue channels
Sub page access
Some text pages are made up of several
sub pages which rotate automatically if
you wish to view P4 of 8 press the sub page
button. “----” will appear. Enter 0004.
Direct access to subject headings
Coloured boxes are displayed at the bottom
of the screen. The 4 coloured buttons give
access to the corresponding subjects or pages.
Direct access to a page
All the numeric buttons can be used
to select a page number directly.
If you need page 301, press 3 then
0 then 1.
Index page selector
To call up the Index pages.
eg. P100.
Page up and down
To select the next page number or
previous programme number.
Teletext/TV selector
To switch TV, MIX and Teletext mode.
Standby/Power on/off
To switch the TV on and off.
Reveal switch
This reveals hidden items on the teletext
page eg: a hidden answer to a quiz question.
Up / down page access
Press the button to select the next page
or previous page number.
Size switch
This will make either the top half or
the bottom half of the page expand
to fill the whole screen.
Stop
This stops the sub pages from changing.
The word “STOP” will appear instead of
the page number.
Return
To view the TV picture in the teletext mode
while waiting for the text page to change or update
(not available for sub pages).
Note. the page number will appear if the
text page is available.
Teletext If you find the power indicator flashing, please turn the TV
set off with the Standby switch and disconnect the power
cord from the power outlet and contact our Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
HDMI
HDMI
L/S
L/S
R/D
R/D
To audio equipment
Analogue and Digital Operation

20
REM0TE CONTROL - HARD DISK USE
Forward
To fast forward the HDD/ DVD content at
different forward rates
OK
Press OK button to confirm a selected item
in the HDD Setup menu
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons for example
for channel 23, press 2 and 3 numeric
buttons.
Cursors
To select the sub menu items in the
menu display, Up, Down, Left, Right.
Display
Press to display current operation status.
For example while playing the hard disk use the
display button to view the current chapter, title etc
Time Out
To activate the Time out Function
This feature can pause live media
coverage. Replay
To activate or deactivate the Replay Function
when the Always Replay function is OFF.
The Replay button does not work when
the Always Replay function is active
Pause/ Step
To pause the current playing content.
Press the button twice to display the video
image frame by fame
Play
Press to start playing the HDD/DVD content
Also to start playing a still picture from the
Time out or from the Replay function
Stop
Press to stop playing or
recording current content. This button
can be used to cancel Time out or Replay function
Record
Press to start recording from selected media content.
To activate sleep mode press the Record button twice
this will display the remaining record time on screen
Reverse
Press to fast reverse the
HDD/DVD content at different rewind rates.
To view REPLAY contents press the reverse
button then the PLAY button
ADV 30
To skip the HDD content 30
seconds forward
Previous/ Next
To jump to next/ previous title
or chapter while playing a DVD/HDD
HDD MENU (setup)
To show or hide the “Setupʼ menu
Record Mode
Press to select the recording mode.
This affects the video quality and
possibly recording length
Timer REC
To access directly to the
Timer REC menu
Repeat mode
Press to select a repeat mode:
Title: Repeat a tilte
ALL: Repeat all titles
OFF :no repeat (press repeatly untill displayed)
Play list/ menu
Press to show/ hide the play
list or menu screen
Zoom
Press to zoom in on the video image
Can elarge and pan a paused image.
(200%/ 400%/ 800% zoom rate)
Clear
Press to clear the settings in Timer Record
A-B repeat
Press to acces the A-B repeat function
To repeat certain sequences