Sarabec Sonumaxx User manual

Operation
To recharge this system simply drop the
receiver onto the charging slot of the
Transmitter.
Please ensure that the receiver unit is
switched off during charging or it will
not reach its maximum charge capacity.
IMPORTANT
Please remember to switch your hearing aid to the “T” Loop position if you
are using this system with a neckloop or earhooks.
BC
Sonumaxx Quick Start Guide
Battery Installation and charging
Batteries for this receiver unit are already installed, however they will require a
long charge of at least 12-14 hours before operation.
Should you need to change or remove these batteries please follow the proce-
dure below.
Step 1
Step 2

EQUIPMENT LIST
Transmitter
Receiver
Mains Power Supply
Phono - Phono Lead
Scart adaptor
Phono Socket—3.5mm
Plug Lead
EASY SETUP
Connecting to your equipment using the method shown above should give excel-
lent results, however not all Televisions and Audio equipment are the same.
If you connect to the TV/Audio equipment via the headphone socket the sound
may be cut off for other users, however some of the newer types of television
have a setting where you may be able to override this (refer to your user guide)
The preferred method of connection is through the Audio Output L & R sockets,
this should give you the correct sound in any situation.