Sareer INFINITY BED 4FT6 User manual

Sareer Furniture
INFINITY BED 4FT6 & 5FT & 6FT
Assembly Instruction
01

02
Extra
Tools Required

03
INFINITY BED 4FT6 & 5FT & 6FT
1. Please read through and follow the step by step
instructions in the leaflet.
2. We recommend that assembly is done in the room
intended for use and it is assembled by two adults.
3. Please do not discard any packaging before you have
checked all the parts and fittings are complete.
4. Assemble this product on a flat and clean surface
to avoid scratching.
5. Do not fully tighten all bolts until all parts have
been assembled loosely.Product and/or fittings
might be damaged by over tightening screws or bolts.
Beware of cross-threading the screws and nuts
during assembly.
6. Keep fittings away from children’s reach.
7. Take care when handling or moving the furniture.
Careless handling can damage wooden furniture,try
to lift rather than drag.
SAFETY WARNING: Do not stand on the bed base
without a mattress in place.

05
General Care
Avoid the use of all household cleaners and abrasives.
When moving you furniture,carefully lift into place.
Never drag or push the pieces across the floor as this
will couse damage to the joints and could result in
failure to the product that will invalidate the warranty.
Recommendations
Warning
Periodical re-tightening of fixings.
This unit is heavy. Please use an assistant when lifting.
Savile Business Centre, Mill Street East,Dewsbury,West Yorkshire,WF 12 9AH.
E-mail: [email protected]
www.sareerfurniture.co.uk
Sareer Furniture

MODEL: ASSEMBLY INSTRUCTIONS
STEP 3
STEP 2
STEP 1
STEP 5
STEP 4
C
4x
1
5
C
A
B
B
X 2 People
SCREW DRIVER
NOT INCLUED
Read this instruction carefully. Remove all
wrapping material, staples and straps from the
carton. See hardware and furniture part list for
guidance. Be sure you have all wooden furniture
parts on a clean and flat soft surface, such as a
carpet or rug, to prevent from being scratched.
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw untill all is
ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid
causing damages to the thread.
3. Keep all hardware part out reach of children.
B
NO PART LIST QTY
A Headboard 1 pc
B Foodboard 1 pc
C Side Rail
D LVL Sprung
E Center Rail Support
F Center Rail Support Leg
G Bed Leg
2 pcs
6 pcs
4 pcs
2 pcs
36 pcs
C
INFI 2971 - 6FT SUPER KING BED
A
BE
4x
B
C
C
G
G
G
G
E
COMPLETE
ASSEMBLED
A
A
A
4x
3
G
B
A
4
2
8
E
F
6x
E
F
F
F
No Hardware List QTY
6 pcs
1 JCBB BOLT M8 x 20 MM
2 JCBC BOLT M6 x 40 MM
3 CSK SCREW M4 x 45MM
4 ALLEN KEY M4
5 ALLEN KEY M5
6 SINGLE SOCKET
7 DOUBLE SOCKET
16 pcs
24 pcs
24 pcs
1 pc
1 pc
8 pcs
6 pcs8 ADJUSTER M6
6
67
7
D
D
2x
D
04