Sareer Nava 3' Bed User manual

ASSEMBLY INSTRUCTION
BEFORE YOU START
1. Choose a clean, level, spacious asse bly area. Avoid hard surfaces that ay da age the product.
2. Check and ensure that you have all required contents for co plete asse bly.
3. Always read the asse bly instructions carefully before beginning asse bly.
4. The packaging and contents can be a choking hazard, therefore keep out of reach of s all chidren at all ti es.
5. Do not over tighten the bolts as this ay da age the thread.
1-4
Nava 3' Bed
Nava 3' Bed

12
6
3
9
Approxi ate Asse bly
Ti e:15 ins 2 person needed
FITTINGS
EXPLODED EXAMPLES
M6x20 bolt x 8pcs
M6x35 bolt x 2pcs
B
AC M4 Allen Key x 1pc
2-4
1
3
3
5
6
6
4
2

Step 1
Attach the Siderails to both the
headend and footend.
3-4
3
3
B
C
A
C
4
4
3
1
Step 2
Attach the Across Bar to the
Siderails.
2

Step 3
Align the pins on the Plastic Holders
to the holes along the Centre Rail
and the Siderails. Gently tap the
into the holes.
When oving your fully asse bled bed you ust first re ove the attress and
lift the fra e into position, take care when lifting and always have two people
handling the bed. PLEASE DO NOT DRAG THE BED as this will cause da age to
the rail.
It is advisable to use approved cleaning products when cleaning the furniture and
bed fra e as certain che ical based cleaners could have an adverse effect on the
bed finish.
If any queries, please contact your seller.
Retightening of all fixing periodically is reco ended.
3
5
6
4-4