Sase BULL 240 EBS User manual

SASE Company, LLC
2475 Stock Creek Blvd.
Rockford, TN 37853
P | 800.522.2606
F|865.745.4110
SASECompany.com
Operator’s Manual
VAC.BULL240.EBS
BULL 240 EBS
INDUSTRIAL VACUUM

SAFETY INSTRUCTIONS
• Operators must read all instructions prior to operating.
• Power cords must not be placed where heavy equipment can drive over them, nor should they
become a trip hazard for other workers.
• Make certain it is plugged into a properly ground receptacle.
• The unit must be unplugged from the power source before any maintenance work is to be
performed on the unit.
• If the unit should quit working please contact an authorized service technician.
• Do not connect the unit to an improper voltage. This unit use 120 Volt single phase power only.
Product Features
The Bull 240 EBS Vacuum is specically designed for the concrete oor grinding and polishing industry.
It has strong suction, a two stage ltration system, it has an elongated bag system, it is well constructed,
stable, durable, reliable and it can be easily transported.
Filtration System
The Bull 240 EBS Vacuum lter system consists of one star shaped cartridge pre-lter and two HEPA
secondary lters. When in operation the dust particles enter into the cartridge pre-lter rst. The larger
particles will drop down to the bottom the super ne particles will move on through the secondary HEPA
lters. The clean air will discharge from the air outlet and the ne particles will become trapped in the HEPA
lters. With its two stage ltration system it lters dust particles with 99% efciency down to .03 microns.
FILTRATION SYSTEM
Dusty Air
Clear Air
Clear Air
Dust Collection

Cleaning and Maintenance
The pre-lter cartridge lter can be cleaned from the outside of the vacuum by utilizing the manual purge
lever. To use the manual lter purge system, rst you must block or close the air hose inlet, then repeatedly
pull the manual purge handle. This operation will produce sudden bursts of air to the lter. This mechanical
cleaning process will eject dust from the surface of the lter thus allowing a more efcient cleaning
operation. This should be done often during the grinding process. The HEPA lters should be taken out and
cleaned on a daily basis.
Manual Purge
Hose
Handle
HEPA Filter
Vacuum Gauge
Carbon Brush Motors
Rear Wheel
Upper Top Lid
Upper Lid for Bin
Anti static Filter Cartridge
Canister
Air Intake
Bagging Foundation
Front Wheel
Elongated Bags
1st Stage Cartridge Filter 2nd Stage HEPA Filter
Product Parts Diagram

Sealed and Static Half Pulled Full Pulled
Controls / Motor Switches
The vacuum is equipped with two motors each motor has a separate on / off switch. For proper operation,
turn one switch on at a time, this prevents the vacuum from drawing too many AMPS at once that could
potentially cause a breaker to blow. The motors should never be run longer than a 3.5 hour run time
without shutting down and allowing the motors to cool.
Control Box Motor
Carbon Brush Motor
Bull 240 EBS vacuum is equipped with two carbon brush style motors. Each motor is a 1.2 kilowatt.
Hour Meter
The hour meter will stop and start automatically when the machine is turned off or on.
Hour Meter
Manual Air-Pulse Operation

Elongated Bags
Elongated Bag System
The Elongated bag system needs to be emptied periodically and at least once an hour. To change turn the
vacuum motors to the off position, shake the manual purge handle to ensure all large particles drop to the
bottom, use two cable ties as indicated in the photo illustrations below.
Step 1 Step 2 Step 3
Cleaning for the 2nd stage HEPA lter
Take the HEPA lter out from the box, and use air gun or brush to clean the HEPA lter.
Step 1: Remove the screws on
the lid.
Step 2: Remove the lter lid from
the top lid.
Step 3: Take the lters out, and
use a air gun or brush to clean the
lter cartridge.

Bull 240 EBS Wiring Diagram

Specications
Model VAC.BULL240.EBS
Voltage/Hz 120 V/ 60Hz
Power 1 Phase
Airow 224 CFM
Max Air Pressure 79 inches H2O
QTY OF 1st stage cartridge lter 1
QTY of 2nd stage HEPA lter 2
Air Inlet Ø2 inches
Noise 82 ± 2DB
Filter Efciency 99%
Material of 1st lter Anti-static material
Material of 2nd lter Imported TORAY
Filter neness 0.3-3um
Main ltering method Outer ltering type for 1st stage lter
Inner ltering type for 2nd stage lter
Dimension 31"L x 22.5"W x 47.5"H
Weight 181 lbs (82 kg)
Description Item Number QTY
Motor 2
HEPA Filter 2
Cartridge Filter 1
Pressure Gauge 1
Waterproof Switch 2
4 inch Front Wheel 2
8 inch Rear Wheel 2
Elongated Bags SAS.00095 Box of 4
Spare Parts