SATO 8861-90 User manual

Instruction Manual
Pt Sensor Connector Box for SK-L753 Datalogger
(Pt Sensor Temperature Measurement Type)
Thank you for purchasing Pt Sensor Connector Box.
As this product is designed to connect the Datalogger Model SK-L753 Pt Sensor Temperature
Measurement Type and general 4-wire Pt sensor probes, do not use it for other purposes.
Read this manual and the manual for the Datalogger’s main unit together thoroughly before
use and keep it in a safe place for future reference.
Names of Parts
① Connector to main unit
② Sensor cord
③ Terminal block
④ Sensor insertion point
How to Connect
Loosen the screw on the connector box to open its lid, and screw the Pt sensor to the terminal
block inside referring to the carved alphabet. After then
close the lid so as not to nip the cords. Next, insert ① above
into the connector part on the Datalogger’s main unit in a
correct direction, and tighten the nut firmly.
Note: Use CH1 on the Datalogger first before CH2. If the connector box is connected to CH2
when CH1 is empty, temperature is measured but not logged.
Note: 4-wire Pt Sensor Probes are sold separately.
How to Install
Fix the box on a wall or a flat surface with two
screws with a diameter smaller than 7.5 mm.
Using a spacer is advised if needed to hold
the box tightly.

Safety Precautions
⚫This connector box is not waterproof.
⚫3-wire Pt sensors cannot be connected with the connector box.
⚫Fix the connector box on a wall or flat surface in order not to burden the cables on both
sides of the box.
For a repair or calibration, contact us or the retailer from which the probe is purchased.
Specifications
Name
Pt Sensor Connector Box for SK-L753 Datalogger
Cat. No.
8861-90
Storage environment
−10 to 60°C, less than 85%rh without condensing
Weight
103 g
Dimensions
79 (W) x 59 (H) x 30 (D) mm except protrusion
Material
PC resin (body), PVC (cord and connector)
Specifications and appearance may change without notice to be improved.
Warranty Policy
Our products are warranted to be free from defects in materials and workmanship for a period of one
year from date of delivery. If repair or adjustment is necessary and has not been the result of misuse or
force majeure within the one-year-period, please return the units on freight prepaid basis and correction
of the defect will be made without charges. We alone will determine if the product problem is due to
deviations or customer misuse. Out-of-warranty products will be repaired on charge basis.
Warranty during transportation
The warranty during transportation only applies to the products that we arrange the shipment. The case
that the products had been purchased in domestic and were sent to overseas by the purchaser is out of
warranty.
Return of items
Authorization must be obtained from us before returning items for any reason. When applying for
authorization, please include data regarding the reasons the items are to be returned.
SATO KEIRYOKI MFG. CO., LTD.
3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 JAPAN
Tel: [phone] Fax: [phone]
https://www.sksato.co.jp/en/
U.11