Satrue WBT-168 User manual

*** USER’S MANUAL ***
FCC ID : 2AABU-WBT168

The Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. T
his equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur
in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of more of the following measures: -
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced Radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change or
modifications not expressly approved by the party responsible for compliance could void yo
ur authority to
operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
1
This device may not cause harmful interference and
2 This device must accept any interference received, including interference that may cause undesired
operation.
The antenna used for this transmitter must not be collocated or operation in conjunction
with any other antenna or transmitter.
Notice : The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to operate
the device.

WBT-168 Bluetooth Bathroom Scale User’s Guide
(Android system)
SPECIFICATIONS
 Capacity: 150 kg / 330 lb
 Graduation: 100 g / 0.2 lb
 Bluetooth connectivity – BT 2.1 + EDR
 Upload data each time automatically to smartphone (Android system only)
 Apps that calculate BMI, track trend, provide weight chart and allow multiple users
 Stainless steel platform (size: 256 x 267 mm)
 LCD display (size 68 x 33 mm) with backlight
 Tap on & auto off
 Low battery indication
 Over-load indication
 Error indication
 Power source: 4 x 1.5V AAA batteries
BEFORE USE
1) Turn over the scale, find the battery cover on the top, slide it to the right and take it out.
Insert 4 pieces of AAA battery with correct polarity in battery compartment. Close the
battery cover.
2) Put the scale on a flat table, ensure it is steady.
3) Download app “Satrue WBT-168” from Google Play to your smartphone.
(https://play.google.com/store/search?q=satrue&c=apps) or scan the
QR code on the right with your smartphone. Find the icon on
the screen of your smartphone.
4) Turn on Bluetooth of your smartphone.
OPERATIONS
1) Run the app you have previous downloaded from Google Play.
2) Establish your user data, please refer to “Advanced Operations – create new user”.
3) Turn on scale - tap on the platform or press the white button on the bottom.
“8888” appears on the display, then 0.0 after 2~3 seconds. If no weight applied to
the platform for more than 5 minutes, the scale will turn off automatically.
Important!
For first time use, press “BT connection” then ”search device” to search Satrue WBT-168,
click Satrue WBT-168 to pair your smartphone with the scale. If pair-wise key is required,
enter 1234. After Bluetooth connection is enabled, the app will automatically memorize the
scale, once the app is turned on, it will automatically search the scale it paired with and
enable Bluetooth connection. If the automatic connection does not work, please go to
setup page, disable Bluetooth and turn it on again.

4) Carefully step on to the platform and stand still. Your weight will display on scale LCD
and transmits to your smartphone.
5) Press “Conform” beside weight column, the weight and weighing date will be recorded.
6) Press to check your weight and BMI chart. Color of the curves is changeable,
press to select your prefer color.
Select your prefer color
for curve.
Zoom in and zoom out
the screen of curves.

ADVANCED OPERATIONS
Create new user
Press , Press “Create New User”, input your name,
height, weight, birthday and gender, press “Confirm”. If
weight is left blank, the initial weight on the chart will be
0. Please input a correct date for birthday, a date in the
future is not allowed.
Delete User
1) Delete a user unwanted. If all the users are deleted,
the screen will go to Create New User page.
2) Press , Press “Delete User”, press “Confirm” to
delete current user.
Clear user REC.
Press to clear weight record of the current user.
Select Language
Select language in Traditional Chinese or English.
Send Record
Send weight record by e-mail. Input your e-mail address
to the blank column above “Send Record”, press “Send Record”, select your e-mail
software and send.
Press to turn on pr turn off Bluetooth.
Press to escape APP.
ADVICE FOR USE AND CARE
1) The scale is made with sensitive electronic components; keep it away from any heat
sources and environment with excessive moisture.
2) For accurate measurements, put the scale on a flat, solid and non-slip floor。
3) Only clean the scale with neutral detergent and a cloth.
4) Remove the batteries if you are not going to use the scale for a long period of time, and
store it in a dry and clean place.
5) Do not attempt to disassemble or repair the scale.
6) Treat the scale with care. Never drop it or jump on it.
WARNING INDICATION
1) If weight exceeds maximum capacity of 150kg (or 330lb), “----” will be displayed. You
should step off the scale immediately or else the scale may be damaged.
2) If “batt” is displayed, replace batteries.