Satson HDM-SPL-2408 User manual

HDM-SPL-2408HDM-SPL-2408
1x8 HDMI Splitter with 4K2K
rev: 130103
Made in Taiwan
7.1 CH
AUDIO
7.1 CH
AUDIO
User Manual

Safety and Notice
The HDM-SPL-2408 1x8 HDMI Splitter with 4K2K has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the HDM-SPL-2408 should be used with care. Please read and follow
the safety instructions to protect yourself from possible injury and to minimize the risk of damage
to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
INTRODUCTION .......................................................................................................... 1
FEATURES ................................................................................................................... 1
PACKAGE CONTENTS ................................................................................................ 1
SPECIFICATIONS ........................................................................................................ 2
PANEL DESCRIPTIONS .............................................................................................. 3
CONNECTION DIAGRAM ............................................................................................ 3
HARDWARE INSTALLATION ....................................................................................... 4
NOTICE ........................................................................................................................ 4
LIMITED WARRANTY .................................................................................................. 5
TABLE OF CONTENTS

1
The HDM-SPL-2408 1x8 HDMI Splitter with 4K2K provides the most cost effective and advanced
HDMI splitter solution on the market, by which the high denition video and high quality audio can be
transmitted to 8 different locations without losing quality. HDM-SPL-2408 supports all 3D formats and the
true 4K 2K video!
With built-in RS-232 rmware update mechanism, the compatibility among countless HDMI sources
and receivers can be further guaranteed. With the upmost 16 bit deep color video and high denition
audio support, HDM-SPL-2408 is suitable for high quality HDMI broadcasting, digital signage and
education applications!
FEATURES
● Supports HDMI Deep Color & 3D / DVI 1.0 compliant
● HDCP 1.3 compliant
● Wide frequency range: 25MHz~340MHz
● Video bandwidth: 10.2Gbps
● Resolution up to 4k 2K 297MHz video
● Automatic EDID learning
● Supports xvYCC, x.v.Color & Deep Color
● RS-232 rmware update for expanding compatibility
● Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
● Easy installation
● 1x HDM-SPL-2408
● 1x Rack-mounting ear set
● 1x DC 5V 4A in-line with C7 power cord
● 1x User manual
iAutomatic EDID learning will detect all the connected HDMI equipped monitors and analyze
all the content of EDID. The EDID with minimal resolution support will be the reference
EDID for incoming HDMI source players.
PACKAGE CONTENTS
INTRODUCTION

2
SPECIFICATIONS
Model Name HDM-SPL-2408
Technical
Role of usage 1x8 Distribution Amplier (Splitter)
HDMI compliance HDMI Deep Color, full 3D & 4K2K
DVI compliance DVI 1.0
HDCP compliance HDCP 1.3
Video bandwidth Single-link 340MHz [10.2Gbps]
Video support Up to 4K 2K 297MHz
Audio support DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±2kV
PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω]
Firmware update Feasible via RS-232 port
ARC N/A
HDMI 1.4 Ethernet
N/A
Input 1x HDMI [7.1ch audio & video]
Output 8x HDMI [7.1ch audio & video]
HDMI connector Type A [19-pin female]
Mechanical
Housing Metal enclosure
Dimensions
[L x W x H]
Model 328 x 102 x 26mm [12.9" x 4" x 1"]
Package 494 x 225 x 70mm [19.4" x 8.9" x 2.8"]
Carton 510 x 380 x 252mm [20" x 15" x 10"]
Weight Model 320g [11 oz]
Package 720g [1.6 lbs]
Fixedness 1RU rack-mounting case with ears
Power supply 5V 4A DC
Power consumption 10 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]

3
PANEL DESCRIPTIONS
Transmitting unit ► HDM-SPL-2408
Rear Panel
1
HDMI OUT1-8: HDMI outputs to HDMI displays
2
HDMI IN: Connect to a HDMI input source
3
RS232:For technical support only [rmware update]
4
Dip Switch: Switch between normal operation mode or rmware update mode(switch ON)
5
Power LED:Lights on when power is on
6
+5V DC: Connect to the 5VDC 4A power supply unit.
1
1
2
3
5
6
4
CONNECTION DIAGRAM
HDMI
HDM-SPL-2408
Blu-ray Player
HDMI CABLE HDMI CABLE
RS-232
RS232 CABLE
Flat Panel Display Projector
FW upgrade
TV with HDMI Input
HDMI
HDM-SPL-2408
Blu-ray Player
HDMI CABLE HDMI CABLE
RS-232
RS232 CABLE
Flat Panel Display Projector
FW upgrade
TV with HDMI Input

4
Broadcasts HDMI signal to 8 HDMI displays!
1. Switch off all devices, including monitors.
2. Connect to the displays.
3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
4. Plug in 5V DC power supply.
5. Power on the HDMI monitors.
6. Power on the HDMI source.
NOTICE
1. While connecting a new monitor to the splitter, experiencing a short period of time without display
might be expected. The splitter will do Automatic EDID learning which analyzes the newly connected
monitor to see if the EDID for the HDMI input is necessary to update!
2. For long range high definition HDMI transmission applications, please adopt CAT5/6 cable based
HDMI extenders.
3. For rmware update through RS232, users MUST turn the power off, set the dip switch to “ON”, and
then connect an RS232 cable between PC and device. Open the rmware update software, set the
correct com port and baud rate (57600 is recommended), click the “File” button to direct to the rmware
HEX or BIN file, power on the device and press “Program MCU” symbol to firmware update. Once
update process is done, please power off the device and set the dip switch back to “1”.
HARDWARE INSTALLATION

5
LIMITED WARRANTY
The SELLER warrants the HDM-SPL-2408 1x8 HDMI Splitter with 4K2K free from defects
in the material and workmanship for 1 year from the date of purchase from the SELLER or an
authorized dealer. Should this product fail to be in good working order within 1 year warranty
period, The SELLER, at its option, repair or replace the unit, provided that the unit has not
been subjected to accident, disaster, abuse or any unauthorized modications including static
discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct
transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price
of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from
the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure
the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be
accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or tness or merchantability for any particular purpose, all
of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables and power adapters are
limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be contained
in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or
consequential damages resulting from any defect or omission in this manual, even if advised of
the possibility of such damages. Also, the technical information contained herein regarding the
HDM-SPL-2408 features and specications is subject to change without further notice.