SAVV LBM-X5200 User manual

ARNING
.
DONOT attempt to operate if picture fails orno sound is
heard.Stop using thé unit and turn it off immediately if
there isany smoke or burning smell. If unit is damaged,
it could cause tiré or electrical shock.
V
r
o
X
/ I \
Thisproduct is designed forDC ^2V. Itis recommended
to checkwith a trained "Authorized Dealer" for usingthis
unit ina RV, truck orbus application.
V
r
DO NOT installunitwhere itmay obstructdriver'ssight or
cause possible injury to passengers.
DO NOT allow installation to interfèrewithnormalvehicle
opérations.Wiring and installation should not interfèrewith
thé brake pedal, steering wheel or transmission shift lever.
V
r
DO NOT remove any screws or hardwarefromvehicle to
installproducts.
O

v
r
C7
Inspect any vehicleareasbeforedrilling any holes for
mounting or wiring of unit.Makesure to checkbehind
installationarea to prevent damaging any existingvehicle
wiring or otherconnections.Failure todoso could resuit
in vehiclemalfunction or impairedvehicle opération.
M\ wiringmust be routedsafely and should not distract
thé driver'sattentionduringnormaloperatingconditions.
DO NOT allow wiring to interfèrewithopération of thé
vehicle'sbrake pedal, shift lever or steering wheel.
J
A
DO NOT eut or modify any DIN cableswith fuse built-in.
Thiscouldrendersuchprotectivecircuitinactive and
potentiallyresuit in permanent damage to thé unit or
vehicle.
Makesureboth DIN cable and otherwiring isnotrun
where itmaybe eut or damaged.
The slots and openings in thé unit is provided for nece-
ssary ventilation.Thèsemust notbe blocked to ensure
reliableopération.
WARNING
For thé bestresults,followwiringdiagram for products a
shown in thé manual.
Do not place unit on uneven or unstable surfaces, avoid
dustyareas and unsealeddoors, or openingswherewater
may be splashed.
V
r
DO NOT watch thé unit while driving.Distracting thé
driver from properopération of thé vehicle can resuit in
possibleaccident or injury.
Proper installationallow thé driver to only watch TV when
thé vehicle is stopped and thé parkingbrake is applied.
J
A
c3)
DONOT disassemble or modify thé product asitmay
cause accident,fire or electricalshock.
V
r
Set thé volume toa moderate level, which will not prevent
yourhearing outside noisessuch as emergencyvehicles.

/ARNING
Use providedparts.Over-sizedhardware may cause an
electricalshort or resuit in product not being mounted
securely.
V
r
Use correctvoltagebatteries only. Make sure to insert
batteriesobservingcorrectpolarity.Using old andnew
batteries isnot recommended.Keep small objects such
as batteries outof thé reach of children.
Swallowing them may resuit in seriousinjury.
Keep thé remotecontrol in safeplacewhen notinuseto
insurethat thé remotecontroldose not interfèrewith thé
vehicleopération ifitis dropped or shifts while driving.
DO NOT Install antennaswhere they could causeunex-
pectedaccident or injury to pedestrians.
G
TABLE OF CONTENTS
1. PrécautionsBefore Use6
2. Features 7
3. Components 7
4. SystemFunctions 8
5. Description of Functions
1) Power On/Off 9
2) Company Logo Welcomes You- 9
3) VideoFormatAutomaticDétection 9
4) On/Off of MuteFunction 10
5) Menu Summary - 10
6) VideoAdjustmentsSummary 11
7) AudioAdjustmentsSummary -11
8) DisplayModeSummary 12
9) RearViewCaméraconnected toAV2- 12
6. SRVMMInstallation 13
7. SystemWiring
1) SecurityRearViewMirrorMonitorwithVideoSource - 14
2) SecurityRearViewMirrorMonitorwith TV Tuner(TU-S5050) 15
3) Security Rear View Mirror Monitor with TV Tuner (TU-S5060) 16
4) SecurityRearViewMirrorMonitorwith A/V MasterUnit - 17
8. Troubleshooting 18
9. Handling of Remote Control - 19
10. Spécifications 19

1. PRECAUTIONSBEFORE USE
2. FEATURES
• Read thé Manual for safeopération of thé product first beforeinitialuse.
•The product is designed for 12 Volt DC, pleasecheck thé batteryvoltage of
thé vehicleprior to installation. Low voltage may damage thé productpower
supply.
•For bestresults,followwiringdiagram of thé product as shown in thé manual.
•The productshould be used at -10°C~ 50°C
•The picture may becomedark on initial useat low température.
Brightness will return to normal after severalminutes.
•Donot touch LCD panel,damage may occurwhendepressed.
•Donot disassemble or modify thé product, this may causeaccidentialfire or
electric shock.Disassemble or modifyingwill also void thé warranty.
•Donot install thé unitwhere itmay interrupt or impede,driver or passenger
in an abruptstop or emergency.
•Set thé volume toa moderate level, whichwill not prevent you from hearing
outsidenoisesuch as emergencyvehicles,trains,etc....
•Tobe operated inan automobile, thé engineshould beon, otherwise thé
battery maybe discharged if used foran extendedperiod of time.
• Foreignmaterial and moisture, in thé product, may cause a problems or
decrease thé quality.
•Donot watch TVor thé monitorwhenoperating a vehicle.
• HighDéfinition, Low Reflection TFTLCD (320 x R.G.B x 234).
• Ail functions are remotecontrol able by infraredSystem.
(Power, Volume,SourceSelect, etc...)
• Elimination of picturenoise (Blue BackScreen).
• OSD(OnScreenDisplay) of ail functions.
• Brightness, Color, Tintfunctioncontrol
• One touchDimmerfunction
• Invertimagecontrolfunction(ImageinvertedUp/Down, Left/Right)
• Built in speaker(0.5W)
• Low powerconsumption(MaxPower 12V/650mA)
• Variablevoltageinputtolérance (11V ~ 16V)
• Dual Audio/Video input (AV1, AV2)
• Monitorfunction in reversegear(withRearViewCaméra)
• Full MirrorwhenPowerOFF, Half Mirror/Half MonitorwhenPower ON
• PAL/NTSCAuto Selectable
3. COMPONENTS
SRVMM (SecurityRearRemoteControlClamperSponge Pad
View MirrorMonitor)Battery(CR2025, 3V)
Cable Tie A/V SelectUnit DIN to DIN CableOwner'sManual

4. SYSTEM FUNCTIONS
5. DESCRIPTION OF FUNCTIONS
r
SRVMM
®
REMOTECONTROL
to mainbody, to remotecontrol
: PowerOn/Offbutton
MuteOn/Offbutton
[REMOTE SENSOR WINDOW : Receiver ofIR remotecontrol signal
: PowerOn/Offbutton
: MenuSelectbutton
MuteOn/Offbutton
VolumeControlbutton
(When OSDis active,used to scrollmenuoptions)
MenuOn/Offbutton
Usedwhenconnectedwith TV Tuner(TU-S5060)
Usedwhenconnectedwith TV Tuner(TU-S5060)
(N/A)
Dimmercontrolbutton
MenuUp/Downbutton
(N/A)
: ExternalAudio/Videoselectorbutton
J3gTgriT;l : IR remotecontrolsensor
: ExternalAudio/Video cable input(X-Link)
* USÎêGL to mainbody, refers to
(1) Power On/Off
control
ON
î
a. Pressbutton
to turn on thé power.
b- Press IJSMS/MLQ^ button and hold for
2 seconds or pressbutton
a second time will power off.
(2) CompanyLogoWelcomes You
DONOT WATCH WHILE DRIVING
•& Whenpower ison, companylogo and
IMPORTANT WARNINGMESSAGEwill be
displayed.
X DONOT WATCH TV while driving.
(3) VideoFormatAutomaticDétection
.
& Thismonitorwilldetectvideoinputsignalauto-
matically. (PAL/NTSC)
* Whenvideoinputsignal is switched(PAL/NTSC),
currentformatwill be displayed on upper left
corner of thé screen as shown.
©

(4) On/Off of MuteFunction
(6) VideoModeSélection
button on main When useof
unit.
a. Press lEWR/MUTi, buttononcelightly
to change to MUTEmode.
b- Press LPWR/MUIE, buttononce togo
back to normal.
When use of of remote control.
- WhenMUTE isnot displayed.
a. Press <B!3HliMliI3l to change to MUTE.
b. Press ^a«Jt'/nn=P oncemore togo back
to normal.
- WhenMUTE is displayed.
a. Change to AUDIOmodefromMENU.
b. Usetogoto cursor.
Select Ontogoto MUTE.
Select OFFtogo back.
a. Press i&isiEHi button.
b. Move to | VIDEO-Tl by using cursor button.
c. Selectfunction you like to changefromBRIGHTNESS,
COLOR,TINT,DIMMER,RESET.
d- Useto increase or decrease.
e.Togo back to previousmenu,press : once.
f. To removedisplayed on screen,press
(It will be automaticallydisappearedwhen no input
for 5 seconds.)
* BRIGHTNESS : Control of Brightness (0-15)
x COLORControl of Color (0-15)
* TINTControl of Tint(NTSC Only 0-15)
* DIMMERControl of Dimmer
(It is recommended touse thé function
when itis dark at night.)
x RESET : Return to factorydefault set
(5) Menu Summary
(7) AudioModeSélection
VIDEO -f
BRIGHT
COLOR
TINT
DIMMER
RESET
AUDIO -f
VOLUME
MUTE
DISPLAY -f
UP/DOWN
LEFT/RIGHT
MIRROR
a. Pressbutton.
b. Select | AUDIO -
The first icon is thé topof eachmenucatagory.
c. Selectfunction you like to changefromVOLUME,
MUTE.
d. Use thé CHI to increase or decrease.
e.Togo back to previousmenu,pressonce.
f. To removeMENUdisplayed on screen,press ||î|
twice.
(It willautomaticallydisappearedwhen no input for
5 seconds.)
«VOLUME : Control of Volume (0~15)
* MUTE : Control of Mute ON&OFF

(8) DisplayModeSélection
a. Press 11?
button.
b. Select I DISPLAY-fil mode.
c. Selectfunction you like to changefromUP/DOWN,
LEFT/RIGHT, MIRROR.
d. Use fflQI to invertimages.
e.Togo back to previous menu,pressonce.
f. To removemenudisplayed on screen,press IH^Mi
twice.
(It will be automaticallydisappearedwhen no input
for 5 seconds.)
* UP/DOWN : ImageInversion ofUP& DOWN
x LEFT/RIGHT : Image Inversion of LEFT & RIGHT
* MIRROR : Select YESorNOfor inversion of image
from securitycaméra.
- YES: 180 degreesinversionfrom left to right.
- NO: Sameimagesfromsecuritycaméra.
(9) RearViewCaméraConnected toAV2
a. Whenswitchingintoreversegear,monitorwill
automaticallyturn onand A/V will be displayed on
top rightcorner.
(If you pressbuttonwhenpower is
already on, companylogo and IMPORTANT
WARNING MESSAGEwill be displayed.)
b. Switchingintodrivegear,monitorwillautomatically
turnoff.
6. SRVMM INSTALLATION
1. Remove any accessoriesattached on your
existingmirror and clean surface.
2. Placesponge padon thé backside of monitor
adhered to thé frontside of yourexistingmirror.
3. Installclips of thé SRVMM to bottom of
existingmirror.
4. PushSRVMMcarefullyupwarduntillupper
clip locks ontotop part of yourexisting mirror.
5. PositionSRVMM for optimumviewingangle
and check thé clips for propermounting.
6. The enclosedwireties may be used to further
increase thé stability and security of thé SRVMM
to thé factoryinstalledrearviewmirror.
Install wireties as shown in thé diagram.
7. Check thé SRVMMposition, make sure it does
not impede thé driver or passenger of thé
vehicle.
8. Connectcables by matching thé arrows
on thé cable.
* SRVMM : SecurityRearViewMirrorMonitor

7. SYSTEM WIRING
1) SRVMM + Caméra + Alternate Video source
SRVMM
Rear ViewCaméra
& ConnectRearView Caméra
input to AV2.
AV2 is activated by Reverse light input.
(PT-VS21)
r ower *
Reverse Liqht Input
<
f
(DC12V)
x Trace, identify and connect
to thé reverse light wire at
thé fusebox.
Do not connect to wires
in thé rear of thé vehicle.
L
— AV2[
FUSE
RED(+)
~'to' BLACK(-)
GREEN(+)
BLACK(-)
^^^ AUDIO (WHITE)
VIDEO (GREEN)
IR (BLACK)
••C^-
AUDIO
(RED)
VIDEO
j (YELLOW)
AV1
4
AlternativeVideo
SourceInput.
2) SRVMM + TU-S5050 + AlternateVideoSource
SRVMM
TU-S5050(not included)
DO NOTUSE DIN EXTENSIONCABLE
TO CONNECTLBM-X5200 TO TU-S5050
COMPOSITEINPUTONLY.

3) SRVMM + TU-S5060 + Alternate Video Source
SRVMM
Additional Monitors
II—I—11
TLJ-S5060(notincluded)
TV TUNER/DIVERSITY UNIT
(Power Cable)
Trace,identify and connect to thé reverse
light wire at thé fuse box.
Donot connect to wires in thé rear of thé
vehicle.
y LU tu
Diversity Antenna
&@ TheDintoDin connection will allow
communication between both units.
If directsunlightadversely affects thé 1R
receiving sensor, locate a remoterégion of
dash and attach this for shaded réception.
Optional
A/V Source,
Navigationmodule
....
* Camérainputfunction on TU-S5060 isnot workingwithLBM-X5200when it connected
by DINtoDIN cable.
.j. Rear-viewcamérawillworkingwithLBM-X5200when it connectdirectly to PT-VS21 or
iî/ AVM-X5040'scaméra input.
4) SRVMM +A/V Master + Alternate Video Source
SRVMM
A/V Master Unit
©

8. TROUBLESHOOTING
Check thé followingdétailsbeforerequestingwarrantyservice, each
spécifieproblem maybe solved by referringpage.
Problem
Power won't
turn ON
No Picture
No Sound
Picture ON,
No Sound
Remote Control
doesn'twork
SRVMMgets hot
No color or
B&W
No réception of
rear viewcaméra
Checking Methods and Solutions
* Check if powersupply ofout device is
connectedcorrectly.
* Check if powersupply ofout device is
connectedcorrectly.
* Checkvolumecontrol issettoo low.
*In case of AV mode,checkaudioconnections.
* Avoidusing thé remotecontrol in direct sunlight.
* Place thé remotecontrolfacing thé monitor
IR sensor.
* Check thé remotecontrolbattery,replace is bad.
* DirectSunlight or hightempérature, may damage
thé life of thé battery,replace if battery islow charge.
If batteryfluiddischarges,cleanfluid and replace
with new battery.
*A certain level of heat is generated by thé
TFT LCD,this isa normalcharacteristic.
* Checkvideomodeadjustments,colormenu.
* Please check thé connection of mainpower cable.
page
14
14
11,14
19
11
14
9. HANDLING OF REMOTE CONTROL
For remotecontrolusage
• Componentsprovided for convenience of users.
• II shouldface thé bottom of thé product in use.
Précautions
• Donot exposeremotecontrol to directsunlight or high température.
• Directsunlight will not enable thé remote to workproperly.
• Keepremotecontrol in custody after removing thé battery in case itisnot used
for morethan 1 month.
• If battery fluid discharges, clean thé battery fluid and replacebattery.
• Keepremote control ina safe place to preventfallingdownunder thé brake or
accelerator pedal that may cause an accident.
(BACK SIDE)
©
1. Insert thé tipof thé pen into thé slot of batterycase & pulldown
towards a arrowmark.
2. Place thé battery "+" facing up. (Product No. CR2025, 3V)
3. Push batterycaseintoremotecontrol.
10. SPECIFICATIONS
Power
PowerConsumption
Power Consumption(Stand by)
VideoType
Speakeroutput
Videoinputlevel
Actualscreensize(mm)
Dimensions(mm)
Weight (grams)
Remotecontrolbattery
DC 12V (11-1 6V)
650mA (DC 12V)
35mA
PAL/NTSC Autosélect
0.5W
1Vp-p, 75Q (COMPOSITE)
105(W)x78(H)
314(W)x99(H)x23(D)
310g ±3g
CR2025, 3V
Jj NOTE : Spécifications are subject to change without notice.