Panel View
HD02-4K LED Indication
POWER Green on Power on
INPUT Blue on HDMI Input
OUTPUT1 Blue on HDMI output 1
OUTPUT2 Blue on HDMI output 2
HD02-4K DIP Switch Instruction
Switch all OFF: Default 1080P as EDID source.
Switch ON 1: Monitor of output 1 as EDID source.
Switch ON 2: Monitor of output 2 as EDID source.
EDID COPY Button Instruction
Press “EDID COPY”button to learn EDID from selected EDID source, when INPUT/OUTPUT LED flash once
means EDID copy completed.
※ HDMI source must be connect during EDID copy operation.
※ When learning more than one port, the new EDID will support two channel audio only.
※ Restore default EDID: Set all dip switches OFF, connect the HDMI input and press the EDID COPY button
Example 1: Turn DIP switch 1 ON, press the EDID COPY button to copy EDID from monitor of output 1 (name,
supported resolution and audio format)
Example 2: Monitors of output 1 and 2 support different resolutions, turn the DIP switches 1 and 2 ON then press the
EDID COPY button to integrate a new set of EDID. The resolution is supported by both monitors and audio format is two
channels
Console Port
RS232 interface connect to PC for firmware updated
