SC&T SDI04D User manual

Smart Cabling & Transmission Corp. V1.0
SDI Distributor
User Manual
Model :SDI04D
1 x 4 Output 3G-SDI Distribution Amplifier

1
User Manual
SDI04D
Introduction
SDI04D is an 1-in-4-out SDI distribution amplifier that can split one SDI for 4 SDI devices at remote side
with transmission distance up to 400M. The re-clock function reduces the accumulated jitter and
correctly display the desired video...
Features
Splits and Extends 1 SDI into 4 SDI signals.
Resolution up to 3G-SDI.
Signal extension up to 400M over a RG59/ 6U coaxial cable.
Supports equalizing and reclocking functions for good signal deliverability..
Installation view
Transmission Distance
Max. distance via high quality 75ΩCoaxial Cable ( Belden
1505A,1694A RG6U Testing)
From SDI source
To SDI monitor
SD resolution (270Mbps: 480i,576i )
400M
400M
HD resolution (1.45Gbps: 720p,1080i,1080p@24/25/30Hz )
200M
200M
Full HD resolution (2.97Gbps:
1080p@50/60Hz)
100M
100M
Max. distance via high quality 75ΩCoaxial Cable ( Belden
1505A RG59 Testing)
From SDI source
To SDI monitor
SD resolution (270Mbps: 480i,576i )
300M
300M
HD resolution (1.45Gbps: 720p,1080i,1080p@24/25/30Hz )
150M
150M
Full HD resolution (2.97Gbps:
1080p@50/60Hz)
80M
80M

2
User Manual
SDI04D
Recommend Cable
To send HD signal, the coax cable Bandwidth must over 1.5G. If send Full HD signal, the coax cable
Bandwidth must over 3G.
Link cable recommend to use high quality 75ΩCoaxial Cable and BNC connector, low quality coaxial
cable may case signal loss and effect transmission distance and reliability.
LED Indication
GREEN
ON Power ON
OFF Power OFF
BLUE
ON SDI signal input
OFF No SDI signal input
Panel View
Jitter
Video Format
Output Jitter
SD-SDI
0.02 UI p-p (Typical)
HD-SDI
0.04 UI p-p (Typical)
3G-SDI
0.07 UI p-p (Typical)

3
User Manual
SDI04D
Specification
ITEM NO.
SDI04D
Support
Compliance
SMPTE 259M, SMPTE 292M, SMPTE 424M
Max. Video Resolution
3G-SDI
Transmission Distance
100M at 3G-SDI
Network Bandwidth
10/ 100Mbps
Ports & Interfaces
Video Input
1 x 75Ω BNC
Video Output
4 x 75Ω BNC
Power
Power Supply
DC 5V 1A
Power Consumption
550mA (Max)
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
Up to 95%
Physical Characteristics
Dimensions
88 x 75 x 30mm
Weight
220g