ScanSoft PDF CREATE! 3-HELP Reference guide

1
ScanSoft®PDF Create! 3
Online Help

2
ScanSoft®PDF Create! 3 Online Help
ScanSoft, Inc. provides this publication without representation or warranty of any kind. ScanSoft, Inc.
reserves the right to revise this publication and to change the information contained in this publication
without further notice.
Copyright © 2005ScanSoft, Inc. All rights reserved.
Without limiting the rights under copyright reserved above, no part of this publication may be reproduced,
stored in or introduced into a retrieval system, or transmitted in any form or by any means, including, without
limitation, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission
of ScanSoft, Inc.
ScanSoft and the PDF Create! logo are registered trademarks or trademarks of ScanSoft, Inc. in the United
States and/or other countries. All other company names and product names in this publication may be the
trademarks of their respective owners, including the following:
Microsoft, Windows, Microsoft Word, Excel, Explorer and PowerPoint are registered trademarks and/or
trademarks of Microsoft Corporation in the U.S. and other countries. Adobe Acrobat and Adobe Reader are
trademarks of Adobe Systems Inc. InstallShield is a registered trademark of InstallShield Software
Corporation. Pentium is a trademark of Intel Corporation. Zeon and DocuCom are trademarks of Zeon
Corporation or its subsidiaries and may be registered in certain jurisdictions.
A publication of
ScanSoft, Inc.
9 Centennial Drive
Peabody, MA 01960
United States of America
Last modified: February 24, 2005
www.scansoft.com

3
Using ScanSoft PDF Create!
ScanSoft®PDF Create! 3 enables you to generate PDF files directly from any
Microsoft Windows (98, Me, NT, 2000, XP) application using the Print command.
In Microsoft Word, Excel and PowerPoint, you can also use the toolbar shortcut
to print a PDF file.
The PDF files will be viewable, printable, searchable and editable (they will be
“Normal” PDF files) unless the source file came from an imaging application or
security permissions prohibit some of these functions.
Scope of this Help
This Online Help tells you how to create PDF files using the Print dialog box in
your print-enabled applications. It tells how to use the ScanSoft PDF Create!
Properties dialog box to control different aspects of PDF creation.
This Help does not document the following items:
PDF Create! Assistant
This Assistant is called from the Windows Start menu. It lets you compile a list of
files to be converted. These files may have been created in different applications.
Choose to combine the files in the given order to create a single PDF file or have
each file converted separately. Files can also be overlaid for the conversion.
Please click the Help button in the Assistant to access its own Help system.
PDF Links dialog box
This dialog box can be accessed from Microsoft Word, from a toolbar button or
an item in the PDF Create! menu. It lets you define settings that are applicable
only when creating a PDF from a Word document. Define which paragraph styles
in the Word document should be converted to bookmarks in the PDF, which
comments should be transferred and how hyperlinks should appear. Please click
the Help button in the PDF Links dialog box to access its own Help system.
System Requirements
The following are the minimum system requirements to install and run ScanSoft®
PDF Create! 3:
A computer with an Intel®Pentium®or higher processor
Microsoft Windows®98 (from second edition), Windows Me, Windows
2000 (SP4), or Windows XP (SP1, SP2)

4
Microsoft Internet Explorer 5.1 or above
Microsoft Word 97*, Microsoft Word 2000, Microsoft Word XP or Microsoft
Word 2003
64 MB of memory (RAM), 128 MB recommended
50 MB of free hard disk space for application files plus 5MB working space
during installation
5 MB for Microsoft Installer (MSI) if not present. (This is present as part of
the operating system in Windows Me, Windows 2000 and Windows XP)
SVGA monitor with 256 colors, but preferably 16-bit color (called High
Color in Windows 2000 and Medium Color in XP) and 800 x 600 pixel
resolution
Windows-compatible pointing device
CD-ROM drive for installation
Note:Performance and speed will be enhanced if your computer’s processor,
memory, and available disk space exceed minimum requirements.
Note:Disk space and memory requirements may be higher on some operating
systems.
Installation and Activation
Please remove any version of the Zeon DocuCom PDF printer driver utility before
the installation. ScanSoft PDF Create! is a customized and updated version of
that utility and it cannot co-exist with other versions.
1. Insert the CD-ROM in your CD-ROM drive
The installation program will start automatically. If it does not, locate your CD-
ROM drive in Windows Explorer and double-click the program’s setup.exe file.
Select a language for installation. The InstallShield®Wizard will appear.
(If you have downloaded the program from the ScanSoft web site, double-click its
setup.exe file.)
*Supports only File/Print. No ScanSoft PDF toolbar buttons.

5
2. Follow the on-screen instructions
You must accept the license agreement in order to proceed.
You must enter a serial number. You will find this on the CD sleeve or on the
ScanSoft web site at the download location. Be sure to keep the serial number in
a safe place; it is fully checked only during product activation and is also needed
for any re-installations.
The installer offers a default location for the program. Accept it or define a
different one.
3. Click Finish
Registration runs at the end of installation. Select Register Online to establish a
connection to the ScanSoft web site. We provide an easy electronic form that can
be completed in a few moments. When the form is filled, click Submit.
If you decide not to register or to be reminded later, you can go to
http://www.scansoft.com/ to register online any time later. Click on Support and
from the main support screen choose Register in the left-hand column.
For a statement on the use of your registration data, please see ScanSoft’s
Privacy Policy.
4. Activate
You will be invited to activate the product at the end of installation. Please ensure
that web access is available. Provided your serial number is found at its storage
location and has been correctly entered, no user interactionis required and no
personal information is transmitted.
If you do not activate the product at installation time, you will be invited to do this
each time you invoke the program. PDF Create! can be launched only five times
without activation.
Note:The user performing installation or un-installation should have
Administrator rights on the computer. Administrator rights are recommended for
activation and de-activation.
Note:You will be allowed to re-install the program a reasonable number of times
without having re-activation problems, because un-installation includes a de-
activation step. The serial number is needed for re-installation and web access is
needed for de-activation and re-activation.
Network Installation: The program can be installed on a server and pushed to
local computers in a Local Area Network (LAN). Please contact ScanSoft for
license information and separate documentation.

6
Creating a PDF document
To create a PDF document:
1. Create a new document or open an existing document in any Windows
application.
2. On the File menu, select Print.
In the Printer dialog box select the ScanSoft PDF Create! as your active
printer if it is not already displayed.
3. Click OK.
4. Specify printing options.
Enter the target PDF file name and location in the Save As dialog box.
To view the PDF file, select View Resulting PDF.
5. Click Save.
Note:Your printing options may differ, depending on the settings you specify for
the ScanSoft PDF Create! driver, as described in the next section.
Modifying PDF Create! Behavior
The ScanSoft PDF Create! Properties dialog box includes two tabs,General and
PDF Settings, where you can modify driver settings. A third tab, About, provides
version information about the product.
You can set printing preferences for the current document only, or for all
subsequent documents.
To set properties for the current document:
1. On the File menu, select Print.
In the Printer dialog box, select ScanSoft PDF Create! as your active printer
if it is not already displayed.
2. Click Properties.
3. Select each of the tabs and specify settings for creating PDF files.

7
4. Click OK to confirm all settings.
To set printing preferences for all documents:
1. On the Windows Start menu, point to Settings, and then click Printers.
2. Then, right–click ScanSoft PDF Create! and click Printing Preferences.
3. Select each of the tabs and specify settings for creating PDF files.
4. Click OK to confirm all settings.
General Tab
The General tab provides controls for the size and page layout of the PDF file.
Note:Page Setup settings in applications, such as Microsoft Word, may override
some General settings made in PDF Create!
Paper Size
Select Standard and then choose a page size from the pull–down list, or choose
Custom and specify the page dimensions and margins.
Click Add to define or modify additional standard page sizes using page
dimensions you specify.
Orientation
Select Portrait or Landscape.
Resolution
This setting influences character spacing, line breaks, and image quality. Usually,
higher resolution produces a more accurate layout but a larger file size.
Select a resolution: Screen (72 dpi), Low (150 dpi), Medium (300 dpi), High
(600 dpi), 1200 or 2400 dpi (dots per inch).
Low resolution is ideal for screen viewing. However, if you require high-quality
hard copy, or accurate control of character position, choose a resolution of at
least 600 dpi.

8
Scale
Specify whether to reduce or enlarge a document, and by what percentage,
between 1 and 1000 percent.
Enter a value less than 100 percent to reduce the size of the text and images on
the page; enter a value greater than 100 percent to enlarge them.
View Resulting PDF
Select this option to view the PDF file. By default it is selected.
PDF Settings Tab
The PDF Settings Tab provides controls for Compatibility, Web optimizing,
Destination and Document Settings. It also provides a choice of standard
controls for Font Embedding, Compression, Watermarks and Security. Choose a
standard control or click the corresponding Advanced button to fully control the
process.
Compatible with
Choose PDF 1.3 or PDF 1.4 or PDF 1.5 to create files compatible with one of
these PDF versions.
Selecting the PDF 1.4 (compatible with Adobe AcrobatReader version 5.0 or
higher) option will create PDF 1.4 specific commands, such as “Transparency”
and may result in higher quality and smaller file sizes.
Selecting the PDF 1.5 (compatible with Adobe AcrobatReader version 6.0 or
higher) option will create PDF 1.5 specific commands, such as allowing you to
use the more efficient JPEG2000 compression and 128-bit encryption.
Optimized for Web Viewing
Choose this option to increase the viewing speed of your PDF documents on
web sites.
Font Embedding
ScanSoft PDF Create! lets you include fonts inside PDF documents. Font
embedding slows down PDF creation and increases file size, but it ensures
document layout and appearance are preserved, regardless of the fonts available
on a reader’s computer. Choose a standard control:

9
Embed Non-Standard Fonts (default)
Embed All Fonts
Do Not Embed Fonts.
The default embeds all fonts except the most common fonts that all computers
should have: typically Arial, Times New Roman, Courier and Symbol.
Click Advanced to see the settings for each standard control. To specify more
precise settings for a customized control, click New, name a new control, make
the desired settings and click OK.
To specify a list of fonts to be always embedded, de-select Embed All Used
Fonts, select Always Embed Fonts, select the desired fonts one-by-one and
use the right-facing arrow button to place them in the Always Embed Fonts
panel.
To activate the arrow buttons select the checkbox next to them and select a font.
Click an arrow button to change its direction. This lets you add or remove fonts
from the lists.
To have all fonts embedded except fonts that you choose, select Embed All
Used Fonts, then select Never Embed Fonts; add or remove fonts until the
desired ones are listed and click OK.
Note:Font files have a flag to allow or prohibit embedding. ScanSoft PDF
Create! respects this instruction.
Use Delete to delete a control. Use Default to return supplied controls to default
values and remove user-defined controls.
Compression
ScanSoft PDF Create! includes six predefined conversion controls which specify
settings for compressing text and graphics (line art) as well as specific
compression settings for color images, grayscale images, and monochrome
(black and white) images. Compression helps to make your PDF files smaller.
You can select the appropriate control from the drop-down list:
Medium Quality (level 50) (default)
High Quality (level 75)
Low Quality (level 25)
LossLess (level 100)
Image Place Holder (level 5)
No Image (level 0)
Set level 0 to have pictures in the source document dropped from the PDF.
Select level 5 to have very low quality images, serving only as place-holders.

10
You can edit the settings for an existing control, add a new control, or delete an
existing control in the Compression Controls dialog box.
To display the Compression Control dialog box:
1. Click the Advanced button.
2. Highlight a conversion control in the list of conversion controls and view or
edit the settings as needed.
Modify the Auto-setting
Move the slider from a pre-set value to a value of your choice. This affects the
compression for texts, line art and images in your documents.
Use Custom Settings
Select a compression method for any color, grayscale, or monochrome
images in your document.
For color and grayscale images, you can choose from a range of qualities of
JPEG and ZIP formats, from High to Low.
Which method is best depends on the kind of images in your particular
document. Some compression techniques do not lose any detail in the
original: these methods are called “lossless.” Lossless methods do not save
as much disk space as the other kind of compression, which is called “lossy.”
Files compressed using lossy methods can be much smaller than files using
lossless methods.
For example, JPEG is best for images requiring a smooth transition from one
color or shade to another while ZIP works well for sharper changes. For best
results, you might want to try different compression settings for different
documents.
The default value for each of the predefined conversion controls allows the
print driver to choose the best method based on the nature of the image.
For monochrome images, you can choose from ZIP, CCITT Group and Run
Length encoding.
CCITT (International Coordinating Committee for Telephony and Telegraphy)
compression method works best for black-and-white images made by paint
programs and 1-bit scanned images.
Run Length produces the best results for images that contain large areas of
solid white or black.
ReSample
Select or clear the ReSample setting. Resampling changes the pixel
dimensions (and thus the display size) of an image.