Scansonic R110 User manual

R110
UK User Manual
DE Bedienungsanleitung
DK Brugervejledning
FR Guide d’instructions
IT Manuale di istruzioni
ES Manual del Usuario
SBruksanvisning

R110
1
Contents
1 Contents
2 Important safety instructions
3 Owner’s manual
4 Remote control
5 Front panel
5 Rear panel
6 Connecting the R110
7 Getting started/setup
8 Network
9 Internet radio
10 FM radio
11 DAB radio
12 External source
12 Sub out
13 Other settings
14 Internet radio portal
15 Music Player Mode
16 Alarm and Sleep

R110
2
Important safety instructions
CAUTION, read this rst
READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS.
FOR PROPER OPERATION, THIS UNIT REQUIRES MINIMUM 4” (100mm) OF WELL VENTILATED SPACE
AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT
ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE,POWER, AND FREQUENCY REQUIREMENTS
STATED ON THE REAR PANEL OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF
TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES SPECIFIED BY THE MANUFACTURER FOR SAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product

R110
3
Owner’s manual
Introduction
Thank you for choosing R110. We hope our product
will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this receiver.
After unpacking please check for any damage from
transport. We recommend that you keep the original
carton box and packing material for any future
shipping.
In the carton box you will nd:
1 Remote control
1 FM/DAB antenna
1 Wi-Fi antenna
1 Mains cable
R110 installation
The receiver requires connection to the mains power
supply, so for your safety it is important that you read
this manual carefully.
First switch off all equipment when connecting your
R110.
R110 positioning
Place the amplier on a solid and plane surface. Avoid
placement on carpets and other soft surfaces.
Secure that there is plenty of ventilation around the
amplier, minimum 4” (100mm) free space behind and
above the amplier.
Do not cover the ventilation holes on the backside of
the amplier.
Care and cleaning
We don’t recommend use of any solvents or cleaners
on R110 lacquered cabinets. The cabinet surface
usually only requires dusting or cleaning with a soft
cloth (do not use water).
Disconnect the unit from the mains supply if taken out
of use for a longer period.
Environmental information
The R110 complies with international directives on
the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment and the disposal
of Waste Electrical and Electronic Equipment (WEEE)
- the crossed bin symbol indicates compliance and
that the products must be appropriately recycled or
processed in accordance with these directives.
CAUTION, read this rst
READ, FOLLOW, HEED, AND KEEP ALL
INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON
THIS APPARATUS.
DO NOT USE THIS APPARATUS NEAR
SPLASHING, FALLING, SPRAYING, OR STANDING
LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND
DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED,
SAFETY GROUNDED OUTLET WIRED TO
CURRENT ELECTRICAL CODES AND COMPATIBLE
WITH VOLTAGE, POWER, AND FREQUENCY
REQUIREMENTS STATED ON THE REAR PANEL
OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE
DUE TO BEING WALKED ON, PINCHED, OR
STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING
STORMS OR WHEN UNUSED FOR LONG
PERIODS OF TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES
SPECIFIED BY THE MANUFACTURER FORSAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product

R110
4
Remote control
SLEEP ALARM
STANDBY
PRESET
NAVIGATION
INFO
MUTE
VOLUME +/-
MODE/INPUT SELECT
TREBLE +/-
BALANCE RIGHT
BALANCE RESET
NUM KEYBOARD
MENU
NAVIGATION
BACK
TUNE
BASS +/-
BALANCE LEFT

R110
5
Front panel
Rear panel
Standby Mode Back Up Down Select
- Volume +
Coaxial optical SubOut
Right Speakers Left
On
Off
Ethernet Wi-Fi Antenna Line in
5
1 2 3 4
6 7 8 9 10

R110
6
Coaxial optical SubOut
Ethernet Wi-Fi Antenna
6 7
Right Speakers Left
On
Off
4
9 10
Connecting the R110
First switch off all equipment when connecting your R110.
Set the On/Off switch (4) to Off.
Connect the power cable to the connector on the back (10) and then to
the mains voltage.
Connecting the loudspeakers.
Always switch the power off when connecting loudspeakers.
Connect the loudspeaker cables to the binding pots on the output
terminals (9), accepts wire up to Ø 4mm.
Make sure that positive terminal binding posts (marked + and coloured
red) are connected to the positive output terminal binding posts
on the loudspeaker and that the negative terminals (marked – and
coloured black) are connected to the negative output terminal on the
loudspeakers.
Mount the Wi-Fi antenna (short) onto the Wi-Fi terminal (6).
Mount the FM/DAB antenna (long) onto the antenna terminal (7).

R110
7
Getting started/setup
Setup wizard
When Scansonic R110 is started for the rst time, it runs through a
setup wizard to congure settings for date/time and network.
Note: If you want to use wired network, you can bypass the wizard.
Select YES to start the setup wizard.
Note: If power is removed while the wizard is in progress, the wizard will run again next time the
unit is started.
12/24 hour display
To change between 12 and 24 hour display.
Time/Date
The time and date can be updated manually or automatically. With
auto-update, the time and date are automatically synchronize with
external clocks.
Auto-update
DAB uses time signals from DAB stations.
FM uses time signals from FM radio broadcasts.
Network uses time signal from Frontier Silicon Internet radio portal.
1. Select Update from DAB, FM, Network or No update.
2. Set your timezone
3. If your country uses daylight saving,
Manual set
If you set No update, the wizard now prompts you to set time and
date manually.
The date and time are displayed as dd-mm-yyyy and hh:mm AM/
PM with the active value ashing.
Adjust each value with the Select.

R110
8
Network
Network wizard
Select Region.
Use Up/Down or navigation buttons on the remote control to
highlight desired wireless network from the list or wired, if you want
to use wired ethernet (RJ45 cable), press Select to enter selection.
Enter the network key (password).
Use Up/Down or navigation buttons on the remote control to select
the characters.
Press Select to enter the highlighted character.
Highlight OK and press Select to save password.
The unit will not try to connect to the network.
If connecting fails, it will return to the previous screen.
The network is now connected.
Press Select to exit wizard.
The unit remembers the last four networks it has connected to, and automatically tries to connect
to whichever it can nd.
For users experienced with networks settings, there are also other options for viewing and
manually altering network settings from Menu > System > Settings > Network.

R110
9
Internet radio
Network wizard
The unit can play thousands of radio stations and podcasts from around the world though a
broadband internet connection.
When you select internet radio mode, the unit contacts the Frontier Silicon internet radio portal to
get a list of stations, organised into region, country and different categories.
To enter internet radio mode, press Mode until the display shows Internet Radio, or press IRADIO
on the remote control.
Use Up/Down or navigation buttons on the remote control to
highlight desired wireless network from the list or wired, if you want
to use wired ethernet (RJ45 cable), press Select to enter selection.
Last listened
Use this option to select a recently used station.
Select MENU > Last listened.
Station list
Use this option to browse internet broadcasts.
Select MENU > Station list.
Select on of the following options:
My Favourites Favorites added via the Internet radio portal
Local Local stations
Stations Browse all stations
Podcasts Browse podcasts
My Added
Stations
Manually added stations via the Internet radio
portal.
When Stations is selected you can browse using these options:
Location Geographical location
Genre Rock, Pop, News etc.
Search Enter station name
Popular Popular stations
New Newly added stations
Genre
Once you have select a genre, the list can be display as follows:
All stations
Highlighted Stations
By country
Search
Enter the station name and select OK.

R110
10
FM radio
FM radio mode receives analogue radio from the FM band.
To enter FM mode, press Mode until the display shows FM radio or
press FM on the remote control.
Selecting stations
To nd a station, press Select. The frequency display to count as the unit scans the FM band.
Alternatively, you can scan up or down by pressing the Up or Down button or press and hold the
l>> or <<l on the remote control.
Presets
To store a station as a preset, press and hold Preset until the display shows the Save to preset
screen. Select one of the 10 presets and press Select to save.
To select a preset, press Preset briey, then select one of the listed presets.
Scan settings
By default, FM scans stops at any Available station. This may result in a poor signal to noise ratio
(hiss) from weak stations.
To change the scan settings to stop only at stations with good signal strength, select Menu > Scan
setting and change option to Yes.
Audio settings
By default, all stereo stations are reproduced in stereo. For weak stations this may result in a poor
signal to noise ratio (hiss).
To play weak stations in mono, select Menu > Audio setting and change option to Yes.

R110
11
DAB radio
DAB radio mode receives digital radio from the DAB band and shows
information about the station, the program and music.
To enter DAB mode, press Mode until the display shows DAB radio
or press DAB on the remote control.
Scan for DAB stations
First time the DAB mode is selected, it automatically scans for DAB
stations.
Use Up/Down to select a station from the list and press Select.
To make a new station scan: Menu > Scan and press Select.
Selecting stations
Use MENU > Station to show station and press Select to choose a station.
You can also use l>> or <<l to step to the next DAB station.
Manual tune
Used to scan manually.
Prune invalid
Removes unavailable stations.
DRC
Some DAB broadcasts uses DRC.
DRC is a dynamic range compression.
It increases the quieter parts and decreases the louder parts of the audio signal.
Use MENU > DRC and select DRC high, DRC low or DRC off.
Station order
Used to select sorting order for DAB stations.
Use MENU > Station order and select Alphanumeric, Ensemble or Valid.

R110
12
External source
The R110 can playback signal from different external sources,
such as MP3 player, DVD, TV etc.
Always turn the volume down and switch off all devices, before
connecting external sources.
Coaxial (digital)
Connect the coaxial cable from the external source to the
coaxial connector (1) on the back.
Press Mode several times until the display shows Coax in, or
press COAX on the remote control.
Optical (digital)
Connect the optical cable from the external source to the
optical connector (2) on the back.
Press Mode several times until the display shows Opt in, or
press OPT on the remote control.
AUX (analogue)
Connect the RCAl cable (red and white) from the external
source to the line in connectors (L and R) (8) on the back.
Press Mode several times until the display shows AUX in, or
press AUX on the remote control.
Sub out
The R110 can provide signal to an active subwoofer.
Always turn the volume down and switch off all devices, before
connecting a subwoofer.
Sub out
Connect the RCA mono cable from the subwoofer to the
SubOut connector (3) on the back.
Coaxial optical SubOut
Ethernet Wi-Fi Antenna Line in
1 2
8
Coaxial optical SubOut
Ethernet Wi-Fi Antenna Line in
3

R110
13
Other settings
Equaliser
You can use the equaliser to change the bass, treble and loudness.
Menu > System settings > Equaliser
Choose between presets: Normals, Flat, Jazz, Rock etc., or select My EQ prole setup, to make
your own settings.
Bass
You can change the bass setting from the remote using BASS +/BASS -.
Treble
You can change the bass setting from the remote using TREBLE +/TREBEL -.
Balance
You can change the balance between the left and the right speaker from the remote control using
BAL LEFT and BAL RIGHT.
To reset the balance press RES.
Language
You can change the display language.
MENU > System settings > Language
Factory reset
You can change all settings back to the factory defaults.
MENU > System settings > Factory reset select Yes.

R110
14
Internet radio portal
Registration
The Frontier Silicon Internet radio portal website allows you to organise your favorites lists,
manually add stations and also listen to internet radio on a computer.
To register your Scansonic with the portal, rst get your radios unique
access code:
Switch to Internet radio mode.
MENU > Station list > Help > Get access code
Write down the code
Visit the portal website: www.wiradio-frontier.com
If this is your rst visit to the portal,
register for a new account, entering the
following information:
• access code
• your e-mail address
• password
• radio model (Scansonic R110)
If you already have an account and wish to add an additional radio, log in to your account and
select: My preferences > Add another Wi-Fi radio.

R110
15
Music Player Mode
Music player mode plays audio les such as MP-3, ACC, WMA or
FLAC from a computer on the local network.
To enter FM mode, press Mode until the display shows Music player
or press MUSIC PLAYER on the remote control.
Shared media (from UPnP media server).
Press MENU > Shared media.
If you have set up shared media (such as Windows Media Player)
on your network, you should see a list of the computers containing
shared media.
Select a computer from the list to browse and select a track.
Once a track has been selected, you can skip to the next or previous track, using l>> and <<l on
the remote control.
Note: There are several option to share media through UPnP, such as Windows Media Player and
some Home Nas servers.
iTunes does not currently work as a UPnP media server.

R110
16
Alarm and Sleep
The radios alarm lets you wake up to your desired radio station – or a buzz.
Setting the alarm
Press ALARM on the remote control.
Choose Alarm 1 or Alarm 2 and press SELECT.
Set the following parameters:
• Enable: Off, Daily, Once, Weekends or Weekdays
• Time: HH:MM
• Mode: Buzzer, Internet radio, DAB, FM
• Preset: Last listened or 1-10
• Volume: 0 – max.
To save the new settings, scroll down and select Save.
The alarm icon is now showing the display.
To stop alarm press ALARM or POWER/STANDBY.
Sleep
The sleep function sets the unit in standby when the selected time is elapsed.
To set the sleep timer, press SLEEP on the remote control.
Press SLEEP several time to choose from Sleep OFF, 15 MINS, 30 MINS, 45 MINS or 60 MINS.

R110
UK User Manual
DE Bedienungsanleitung
DK Brugervejledning
FR Guide d’instructions
IT Manuale di istruzioni
FI Käyttöohje
SBruksanvisning
DE Bedienungsanleitung

R110
1
Inhalt
1 Inhalt
2 Wichtige Sicherheitshinweise
3 Bedienungsanleitung
4 Fernbedienung
5 Gerätefront
5 Geräterückseite
6 R110 anschließen
7 Erste Schritte/Einrichtung
8 Netzwerk
9 Internetradio
10 UKW-Radio
11 DAB-Radio
12 Externe Signalquelle
12 Subwoofer-Ausgang
13 Weitere Einstellungen
14 Internetradio-Portal
15 Musicplayer
16 Weckalarm und Sleeptimer

R110
2
Wichtige Sicherheitshinweise
ACHTUNG, bitte erst lesen
LESEN, BEFOLGEN UND BEACHTEN SIE ALLE ANLEITUNGEN UND WARNHINWEISE UND BEWAHREN
SIE SIE FÜR SPÄTERES NACHSCHLAGEN AUF.
BETREIBEN SIE DAS GERÄT NICHT IN UNMITTELBARER NÄHE EINER WÄRMEQUELLE.
BLOCKIEREN SIE NICHT DIE LÜFTUNGSÖFFNUNGEN DES GERÄTS.
FÜR AUSREICHENDE BELÜFTUNG LASSEN SIE RINGS UM DAS GERÄT WENIGSTENS 100 MM ABSTAND.
BENUTZEN SIE DAS GERÄT NICHT IN UNMITTELBARER NÄHE VON SPRITZWASSER, TROPFWASSER,
SPRÜHWASSER ODER STEHENDEN FLÜSSIGKEITEN.
REINIGEN SIE DAS GERÄT NUR MIT EINEM LEICHT ANGEFEUCHTETEN TUCH OHNE
REINIGUNGSMITTEL.
SCHLIEßEN SIE DAS GERÄT NUR AN EINER GEERDETEN STECKDOSE AN. ACHTEN SIE DARAUF, DASS
IHRE NETZSPANNUNG DEN ANGABEN AUF DEM TYPENSCHILD AUF DER RÜCKSEITE DES GERÄTS
ENTSPRICHT.
SCHÜTZEN SIE DAS NETZKABEL VOR SCHÄDEN; NICHT AUF AS KABEL TRETEN, KABEL NICHT
EINKLEMMEN ODER BELASTEN.
ZIEHEN SIE WÄHREND EINES GEWITTERS UND BEI LÄNGERER NICHTBENUTZUNG DEN
NETZSTECKER AB.
BENUTZEN SIE NUR ZUBEHÖRTEILE, DIE VOM HERSTELLER EMPFOHLEN WERDEN.
WARNUNG: ZUR VERMEIDUNG VON STROMSCHLAG UND FEUER.
GERÄT NICHT REGEN ODER FEUCHTIGKEIT AUSSETZEN.
REPARATUREN NUR DURCH DEN AUTORISIERTEN KUNDENDIENST.
VORSICHT
STROMSCHLAGGEFAHR
NICHT ÖFFNEN
Dieses Blitzsymbol weist darauf hin,
dass im Innern des Gehäuses eine
nicht isolierte, gefährliche Spannung
anliegt, die hoch genug sein kann,
um bei Berührung einen Stromschlag
auszulösen.
Das Ausrufungszeichen im gleichseitigen
Dreieck weist auf wichtige Bedienungs-
und Wartungsanleitungen hin.