Scarlett comfort RRI 07C PM3 User manual

RRI 07C PM3
RRI 09C PM3
Модели/Models
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
ЭЛЕКТРИЧЕСКИЙ КОНДИЦИОНЕР ВОЗДУХА
МОБИЛЬНОГО ТИПА/ Portable type electric
air conditioner

2
ENG СОДЕРЖАНИЕ
1. Important InformatIon ..................................................................................................................................................
2. precautIons ...................................................................................................................................................................
3. technIcal characterIstIcs .............................................................................................................................................
4. DevIce DescrIptIon .........................................................................................................................................................
5. DelIvery set ...................................................................................................................................................................
6. applIance control ........................................................................................................................................................
7. operatIng moDes ...........................................................................................................................................................
8. maIntenance .................................................................................................................................................................
3
3
5
6
7
7
8
10
Dear Customer!
Thank you for your good choice and purchase of household air conditioner Scarlett.
It will serve you for a long time.
Air conditioner is intended for cooling, ventilation, dehumidifying.

3
ENG
1. IMPORTANT INFORMATION
2. PRECAUTIONS
1. Do not block vents!
2. Make sure the inlet and outlet vent is not blocked.
3. Do not insert foreign objects into the air diffuser of the air conditioner. It is very dangerous since the fan rotates at high speed.
4. Install the device only on a horizontal surface to prevent condensed water leakage.
5. Do not install the oor-mounted air conditioner in the following places:
- in places exposed to direct sunlight;
- in the vicinity of open re sources;
- in the vicinity of other operating heating devices;
- in places where water or steam splashes can contact the device;
- in rooms with increased humidity;
- close to swimming pools, bathrooms and shower rooms.
1.Please read this instruction manual carefully prior to installation and operation of a portable air
conditioner.
2.To avoid damage to the air conditioner and voiding your guarantee, before start using the air conditioner
put the device in a vertical position (as shown on the cover of this instruction manual) for at least 2 hours
prior to operation.
3.There may be misprints in the text and digital symbols in this manual.
4.If after reading the manual you would still have questions regarding functioning and operation of
the device, please contact the seller or a specialized service center for clarications.
5.The device has a tag indicating all necessary technical data and other useful information about
the device.
6. Use the device only as designated by this manual.
7. Prior to installation of the portable air conditioner, not connecting it to the mains, check and make sure
that the mains socket for the air conditioner has a grounding pin and is properly grounded.
8. In case there is no grounding pin in your mains, operation of the portable air conditioner is lifethreatening.
9. Do not use adapters and extension cords to connect your portable air conditioner.
10. Improper installation and use of this air conditioner may lead to severe injuries or damage
to your property.
11. Any maintenance must be performed by a specialized company and qualied specialists.

4
ENG
IMPORTANT!
Ecient cooling require to:
1) Ensure at least 30 cm of free space on the ltering side of the unit (Fig. 1).
2) Adjust the length of the hose to reach the window. Make sure the air exhaust hose is
unobstructed. Open the window or French window slightly and position the outlet (g. 2).
6. Do not use the device in an explosive or corrosive environment. Do not store gasoline and other volatile ammable liquids near
the air conditioner–it is very dangerous!
7. Use the device to cool down air at ambient temperature 17-35°C.
8. Regularly clean lters to ensure efcient operation of the device.
9. To ensure reliable operation of the compressor, do not tilt the air conditioner.
10. If the device is disconnected, restarting must be performed not sooner than in 3.5 minutes to prevent the compressor failure.
11. At least 10 A current is required for the compressor to operate. To avoid overheating and re risk, as well as damage to the inner
electrical circuit, do not connect the device through extension cords.
12. The device is designed to cool and dry air only in residential conditions and cannot be used for industrial purposes.
13. To avoid electric shock, a damaged power cord must be replaced only by an authorized service center and qualied specialists.
14. Prior to disposal of the device, it is necessary to remov
15. The appliance is not intended for use by children and persons with reduced physical, sensory or mental capabilities, or a lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by an individual responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
Fig. 2
Fig. 1

5
ENG
3. TECHNICAL CHARACTERISTICS
Модель / Model RRI 07C PM3 RRI 09C PM3
Capacity (cooling) BTU (kW) 7000 (2,05) 9000 (2,4)
Capacity (heating) BTU (kW) --
Rated power consumption (cooling) W 780 880
Power supply, V/Hz 220~/50 220~/50
Rated power current (cooling) A 3,7 3,83
Air circulation m3/h 300 320
Capacity of draining (L/d) 20 21,6
Noise level, dB(A) 65 65
Refregerant R410A R410A
Energy effeciency (cooling) АА
Electrical protection class Class II Class II
Degree of moisture protection IPX0 IPX0
Filling of refrigerant, g 260 300
Operating temperature range: cooling, °C +16 ~ +31 +16 ~ +31
Net weight, kg 21 21
Gross weiht, kg 23 23
Net dimensions (mm) 305x328x678 305x328x678
Packing dimensions (mm) 347x377x860 347x377x860

6
ENG NOTICE!
The manufacturer reserves the right to make changes in the design, scope of delivery, product
manufacturing technology, as well as change its technical characteristics to improve its
consumer and technical properties without prior notice.
128
10
13
15
9
11
14
16
12
4
6
7
5
3
Fig. 3 Fig. 4 Fig. 5
4. DEVICE DESCRIPTION
1. Top cover
2.Panel control
3.Handle
4. Air outlet grille
5.Rear side body
6. Front side body
7. Castors
8. Ventilation grille
9. Rear side body
10. The opening for the drain hose
11.Handle
12. The opening for the heat air
13. Air outlet grille
14. Rear side body
15. Castors
16.Air exhaust hose

7
ENG
Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10
5. DELIVERY SET
6. APPLIANCE CONTROL
1. Household air conditioner 1 pc.
2. Air outlet 1 pc.
3. Giftbox - 1pc.
4. Manual - 1 pc.
5. Options (accessories) - depends of delivery
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is ensured: Install the air exhaust hose in the housing at the back
unit (Fig. 1). Install the air conditioner near a window and put an end to hose outlet window (Fig. 2,3,4).
Adjust the length of the hose to reach the window. Make sure the air exhaust hose does not interfere with
anything.

8
ENG 7. OPERATING MODES
1. TIMER button
It used to turn the program automatic on Auto shut-off, together with the buttons « » and « ».
2. SPEED button
Click to select the fan speed: LOW, HIGH. speed display fan lights up when the other fan speed settings except
AUTO. When you select AUTO the fan speed, the fan all the lights are turned off.
3. UP « » and DOWN « » buttons
It used to control the temperature by 1 °C in the range from 16 °C to 31 °C, or in settings TIMER 0 ~ 24 hours.
4. Display indicators
5. SLEEP button
6. MODE selection button
Select the appropriate mode of operation. Each time the button is pressed, selected operating mode in the
following order: COOL, DRY and FAN. Mode indicator lights up when you install another mode.
12 3 4 5 6 7 Fig. 11

9
ENG
7. POWER button
Used to turn on / off the device.
SLEEP mode
This mode can be enabled using the «SLEEP» and « » buttons.
COOL mode
Press «MODE» until the «COOL» indicator lights. Click SETTINGS « » button or « » to select the desired room
temperature. The temperature can be set in the range 16 °C−31 °C.
Press the «FAN» button to select the fan speed.
DRY mode
Press «MODE» until the «DRY» indicator lights. In this mode, you can not select or adjust the fan speedtemperature.
Close windows and doors to achieve the best drying effect. Do not put the duct to window.
FAN mode
Press «MODE» until the «FAN» indicator lights. Press the «FAN» button to select the fan speed. You can not adjust
temperature. Do not put the duct to window.
Instructions in the condensation
1. When lling the tank, switch off the condensation of air conditioning and turn off the power.
Note: Move the device carefully to avoid spillage of water in the bottom of the case
2. Place the water container behind the outlet at the rear of the chassis.
3. Unscrew the drain cap and pull out the plug, the water will automatically ow into the water tank.
Note:
1. Hold the drain plug cover, and the water properly.
2. During drainage, the housing may be tilted slightly backwards.
3. When the water is drained, stick water plug and tighten the drain cap.
Fig. 12

10
ENG 8. MAINTENANCE
ATTENTION!
Disconnect the unit from the mains prior to cleaning.
1. When cleaning the air conditioner, do not use gasoline, solvents and other chemically active
substances.
2. To avoid electric shock and damage to electrical components, do not pour water on the air conditioner
from a tap or a hose.
3. Do not use the air conditioner if the power cord is damaged. On the subject of replacing a damaged power cord,
contact an authorized service center. Air lter clogging with dust particles impairs the air conditioner operation
efciency, therefore clean the lter no less than once in two weeks. Filter removal/installation Remove the air lter
in the direction, indicated by the arrow. Slightly push it and then take it out from the device for cleaning.
Installation of the lter is performed in the reverse order. Filter cleaning At rst, carefully clean the lters by means
of vacuum cleaners. Then immerse the lter in warm water (about 40°C) with a soft detergent, wash it and dry it
without exposure to direct sunlight.
Air intakes (heat exchangers)
Use a vacuum cleaner for cleaning. Case Wipe the surface by a damp cloth and dry it by a soft dry cloth.
Automatic condensate removal Condensate is automatically removed from the unit. Moisture inside the
unit starts to evaporate and is removed from the unit through an air duct (or an air diffuser) in the form of steam.