Schiavello OTM Table User manual

Assembly Instructions
Schiavello Group Pty Ltd reserves the right to change any or all details without prior
notice. All dimensions stated within this document are nominal and/or approximate only
and subject to variation.
Design by doshi levien

Assembly Instructions
Number of pieces included
Assembly
_ Insert stem (3) with stud into the hole of the base (4).
Place washer (5) over the stud and screw on nylock nut (6).
_ Locate top (1) apply Thread Lock onto the thread and align thread on
plate with top of stem. Rotate top until thread engaged and continue
to rotate until it can turn no more.
To lock height adjustment
_ Use grip (2) to adjust height of table top to suit and turn grip to lock
height adjustment.
Tools Required: 1 x socket spanner
1. Top
3. Stem
2. Grip
4. Base
6. Nylock nut
5. Washer
Care Instructions
Veneer surfaces:
Wipe down with a damp cloth, using mild liquid household washing
detergent to keep dust and static attraction to a minimum.
Metal Powder coat surfaces:
Don’t risk micro scratching by dry dusting, use a damp sponge and
mild detergent in warm water and clean the surface to remove any
dust, salt and other deposits.