Schmalz SDI User manual

www.schmalz.com
Innovative Vacuum for Automation
EN
Operating Instructions
Smart Device Interface SDI
30.30.01.00644/01 | 05.2015

www.schmalz.com
Note
These operating instructions were originally written in German and have been translated into English.
Store in a safe place for future reference.
We reserve the right to make technical changes. No responsibility is taken for printing or other types of
errors.
Published by
© J. Schmalz GmbH, 05.2015
This document is protected by copyright. J. Schmalz GmbH retains the rights established thereby.
Reproduction of the contents, in full or in part, is only permitted within the limits of the legal provisions
of copyright law. Any modifications to or abridgments of the document are prohibited without explicit
written agreement from J. Schmalz GmbH.
Contact
J. Schmalz GmbH
Aacher Strasse 29
D-72293 Glatten, Germany
Tel. [phone]
Fax [phone]
[e-mail]
www.schmalz.com
Contact information for Schmalz companies and trade partners worldwide can be found at
www.schmalz.com/ vertriebsnetz

Contents
Smart Device Interface SDI
www.schmalz.com
1Safety Instructions...............................................................................................4
1.1 Classification of safety instructions ...................................................................................4
1.2 Warnings ...........................................................................................................................4
1.3 Mandatory symbol.............................................................................................................4
1.4 General safety instructions................................................................................................5
1.5 Intended use......................................................................................................................5
2Product Description.............................................................................................6
2.1 General..............................................................................................................................6
2.2 Included in delivery............................................................................................................6
2.3 Type plate..........................................................................................................................6
3Design and function ............................................................................................7
3.1 Design ...............................................................................................................................7
3.2 Function.............................................................................................................................7
3.3 Display elements...............................................................................................................7
4Electrical connection...........................................................................................8
4.1 Connecting the SDI electrically .........................................................................................8
4.1.1 Supply and interface..........................................................................................................8
4.2 USB connection diagram...................................................................................................8
4.3 IO-Link connection diagram ..............................................................................................9
5Technical data.....................................................................................................9
5.1 Ambient conditions............................................................................................................9
6Installing software .............................................................................................10
6.1Installing software............................................................................................................10
6.2 Installation .......................................................................................................................10
7Maintenance......................................................................................................14
7.1Cleaning ..........................................................................................................................14
7.2 Troubleshooting...............................................................................................................14
7.3 Disposal...........................................................................................................................14
8Conformity Declaration......................................................................................15

SAFETY INSTRUCTIONS
4 | EN www.schmalz.com 30.30.01.00644/01
1 Safety Instructions
1.1 Classification of safety instructions
Only the instructions that are used in the following operating instructions are listed.
Caution
This warning informs the user of a risk that could result in damage to property if it is not avoided.
CAUTION
Type and source of danger
Consequence
►
Remedial action
General notes
This symbol is used when important notes and information regarding use of the machine/the
system/the device are provided.
Note/Information
1.2 Warnings
Explanation of the warning symbols used in the operating instructions.
Warning symbol
Description
Warning of environmental damage
1.3 Mandatory symbol
Explanation of the mandatory symbols used in the operating instructions.
Mandatory
symbol
Description
Adhere to the operating instructions

SAFETY INSTRUCTIONS
30.30.01.00644/01 www.schmalz.com EN | 5
1.4 General safety instructions
WARNING
Ignoring the general safety guidelines
Personal injuries / damage to plants/systems
►
The operating instructions contain important information on using the SDI.
Read the operating instructions thoroughly and keep them for later reference.
►
The system may only be connected and operations started once the operating
instructions have been read and understood.
►
Use only the connections, mounting holes and attachment materials that have
been provided
.
►
Carry out mounting or disassembly work only when the device is disconnected
from the power supply.
►
Installation may only be carried out by qualified specialist personnel,
mechanics and electricians. Qualified specialist personnel are persons who
have the knowledge and experience –including knowledge of applicable
regulations –necessary to enable them to recognize possible dangers and
implement the appropriate safety measures while performing the tasks
assigned to them. The same applies to maintenance.
►
General safety regulations, European standards and VDE guidelines must be
observed and complied with.
►
It is not permitted to make changes to system components.
►
Protect the components from damage of any kind.
1.5 Intended use
The SDI serves as an adapter between an IO-Link device and a PC with a Windows operating system.
IO_Link devices can be operated, read out and parameterized with the SDI and associated SDI-HMI
software program.
SCHMALZ does not accept any liability for any direct or indirect losses or damages that result from
using the product. This applies, in particular, to any use of the product that is is not in accordance with
the intended purpose and to any use that is not described or mentioned in this documentation.