Schoolhouse Hamilton Bed 126090 User manual

schoolhouse.com
1
ASSEMBLY INSTRUCTIONS
Hamilton Bed
INCLUDED TOOLS + HARDWARE:
5/16"-18 x 1"
Button Head Hex Drive
Screws (x8)
5/16"-18 x 3/4"
Button Head Hex Drive
Screws (x4) twin, (x6) king, queen
5/16"-18
Hex Nut (x6)
5/16"
Spring Washer (x14)
Allen Wrench (x1)
5/16"
Flat Washer (x14)
NOTES:
REQUIRED TOOLS:
Adjustable Wrench
•2-person assembly
2.1. Hold Headboard upright while attaching one side
rail to the headboard using (2) Spring Washers, (2)
Flat Washers, (2) 5/16”-18 x 1” Button Head Hex
Drive Screws and Allen Wrench. Repeat on other
side.
Attach Footboard using (2) Spring Washers, (2)
Flat Washers, (2) 5/16”-18 x 1” Button Head Hex
Drive Screws and Allen Wrench. Repeat on other
side.
STEP 1
STEP 2
Side Rail
Footboard
Headboard

schoolhouse.com
2
STEP 3
STEP 6
3. Attach 2 Support Bars using (4) 5/16”-18 x 3/4”
Button Head Hex Drive Screws, (4) Hex Nuts,
(4) Flat Washers, (4) Spring Washers, Allen Wrench and
Adjustable Wrench.
NOTE: For Twin size, two spare Flat Washers and Spring
Washers included.
5. Screw Support Leg into the center of remaining Support
Bar. Do not fully tighten.
6. Place Center Support Bar with Support Leg in the center
of the bed frame and attach using (2) 5/16"-18 x 3/4" Button
Head Hex Drive Screws, (2) Hex Nuts, (2) Flat Washers,
(2) Spring Washers, Allen Wrench and Adjustable Wrench.
7. Unscrew Support Leg until it is secure against the floor.
8. Place box spring and mattress on frame and take a nap.
4. For Queen and King Sizes proceed to step 5, for Twin
size, skip to step 8.
Support Leg