
INSTALLATION INSTRUCTIONS
OPTION A: CABINET KNOB, DRAWER PULL OR INTERIOR DOOR KNOB
Judy
Toggle Bolt with
#10-24 x 3" Machine
Screw (x1)
schoolhouse.com
REQUIRED TOOLS:
Electric Drill
Phillips Head Screwdriver
Drill Bit: 3/16"for Installation Option A
1/2" for Installation Option B
1/16"for Installation Option C
NOTES:
Judy can be installed as a cabinet knob, drawer pull,
interior door knob, or as a hook at a non-stud or stud
location. Choose the appropriate installation option
below for your application.
INCLUDED HARDWARE:
#10-24 x 1" Machine
Screw (x1)
#10-24 x 2" Machine
Screw (x1)
#10-24 x 1 3/
4" Machine
Screw (x1)
#10 Split Lock
Washer (x1)
#6 x 2" Wood
Screw (x1)
1. Mark mounting location and drill through surface
using 3/16" Drill Bit
2. Select Machine Screw length based on material thick-
ness of cabinet/drawer/door. Insert Machine Screw
through Lock Washer and into pre-drilled hole. Tight-
en using Phillips Head Screwdriver. Thread Judy
Mounting Plate onto Machine Screw.
1
3. Thread Judy knob onto Judy mounting plate. Tighten
by hand.
Judy Mounting
Plate
Split Lock
Washer
Judy
Knob