Schreiber Windsor 615/0404 Datasheet

Windsor Mirror
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
Dimensions
Width - 46cm
Depth - 12cm
Height - 50.5cm
If you need help or have damaged or missing parts, call the Customer Helpline:01799 513466
615/0404
Issue 1 - 06/04/10

1
Safety and Care Advice
Dispose of all packaging
carefully and responsibly.
-
Please read these instructions fully before starting assembly
Important
Retain this instruction for
future reference.
This product has been finished using natural materials. As a living material, you may notice some
variation in the grain and colour shade between the different components.
Solid wood / Real wood veneers
Unlike a synthetic or man-made material which has a uniform finish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result of
any manufacturing fault.
Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not an
imperfection.
Assembly to be carried out by
a competent adult only.
During assembly children
should be kept away from the
product due to possible risk of
injury.
The natural finish should be
cared for by the periodic
application of a good quality
‘wax’ based domestic furniture
This product should not be
discarded
with household waste.
Take to your local authority waste
disposal only.
Care and maintenance
polish (Not silicone!!).
Occasional / small spills
should be removed immediately
using a damp cloth.
Do not allow hot articles to
come into contact with the
surface, as damage will occur.
Do not use abrasive cleaners.
We do not
recommend the
use of power
drill/drivers for
inserting screws.
as this could damage the unit.
Only use hand screwdrivers.
A classic characteristic of oak timber is medullary rays. These are natural rays or streaks usually seen
across the grain. These rays have a different cellular structure and reflect light differently to the
surrounding wood. These rays or streaks are a unique characteristic of natural oak and are there not a
defeat.
This product complies with
BS7449: 1991
Product stock ref: DWINDT
Glass safety
The glass used with this product is annealed mirror glass of a
nominal thickness of 3 mm. It is not required to comply with BS6206.
If a glass component is chipped or broken, replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
Imported by:
Justwise Group Ltd
6 The Shires
Shire Hill Industrial Estate
Saffron Walden
Essex
CB11 3AP
P/O No: K10782/10

Please check you have all the panels listed below
Components - Parts
1Mirror frame
(48x38cm)
2
2Post x 2
(30x4cm)
3Base
(46x12cm)

2
Plastic washer x 2 Metal nut x 4
B
A
Allen key x 1
D
40mm Screw x 6
C
Phillips screwdriver
(medium & large)
Tools required

Assembly Instructions
Step 1
Assembling posts
Assemble posts to
mirror frame using
fixings and .
Note: Plastic washers
are located in between
the posts and the frame.
1
2
3
A
C
B
B
C
C
Step 2
Attaching base
Align base with posts
and secure using
fixings and as
shown.
4
1
2
A
C
2
AC
3
BC
2
2
2
A

Assembly Instructions
Step 3
Adjusting tilt
Stand the mirror upright.
The tightness of fixings
can be adjusted to
ensure the mirror can be
tilted.
If you need help or have damaged or missing parts, call the Customer Helpline: 01799 513466
Justwise Group Ltd., 6 The Shires. Shire Hill Industrial Estate. Saffron Walden. Essex. CB11 3AP
Assembly is complete.
C