SCIFIT ISO1000 Mounting instructions

Users’ Operations Manual
ISO1000 & ISO7000
Upright Bike
Before using this product, read this manual and
follow all safety rules and operating instructions.
Fit-Key™ Compatible

TABLE OF CONTENTS
SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
SETUP & INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
KEYPAD FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BIOMECHANICAL POSITIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HEART RATE TRANSMITTER STRAP & CONTACT GRIPS. . . . . . . . . . . .10
PROGRAM INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 12
MAINTENANCE & SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
WARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
SAFETY INFORMATION
1
Read all instructions before using your SCIFIT
exercise machine. Save these instructions for future
reference.
Close supervision is necessary when exercise machine
is being used by, or near children, or individuals with
disabilities. Keep children away from extended hand
and foot supports.
Use the exercise machine only for its intended use as
described in this manual. Do not use attachments not
recommended by the manufacturer.
Never drop or insert any object into any opening.
Do not use outdoors or in a harsh environment where
water is present (i.e. pool or spa areas).
Failure to obey a safety warning can result in injury
to yourself and others. Always follow the safety
precautions to reduce the risk of personal injury.
The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols,
and their explanations, deserve your careful attention
and understanding. The safety warnings do not, by
themselves, eliminate any danger. The instructions
or warnings they give are not substitutes for proper
accident prevention measures.
Look for these symbols to point out important safety
precautions. It means attention ! Your safety is
involved.
WARNING
Failure to obey a safety caution can result in injury
to yourself and others. Always follow the safety
precautions to reduce the risk of personal injury.
CAUTION

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
INTRODUCTION
2
Thank you for your purchase of the SCIFIT ISO1000
or ISO1007 Adjustable Position Upright Bike. We have
incorporated the finest technology and ergonomic
design into this machine to assist you in achieving
your fitness goals. However, for your safety, please
adhere to the following recommendations before you
begin to exercise.
The SCIFIT ISO1000 & ISO7000 are designed for Class
“S” (Studio), Class “I” (Special Needs) and Class “II a”
(Medical Device Directive) applications. The intended
uses are for Cardio & Pulmonary Rehabilitation as
well as Sports Medicine, Physical Therapy, Physical
Conditioning and Strength Training. SCIFIT equipment
is suitable for placement in fitness, medical rehab,
sports performance and recreational facilities. The
ISO1000 & ISO7000 have 200 levels of computer
controlled resistance, which ensures that users of all
fitness levels will be able to get a challenging but not
overwhelming workout.
Consult Your Physician
Consult your physician or medical specialist before
participating in any exercise program, especially if
you are pregnant, or if you are suffering from: heart
disease, respiratory disease, diabetes, hypertension,
high blood pressure, elevated cholesterol, arthritis, or
any other diseases or physical complaints.
Adult Usage
SCIFIT equipment is designed and intended for adult
usage and children of appropriate ages while being
supervised. Young children should be kept a safe
distance away from equipment.
Cool Down
To prevent muscle injuries and soreness, you should
always cool down (at least 5 minutes) by doing a
series of stretches after each workout.
Train Intelligently
To ensure a future of good health, you should always
eat well balanced meals, drink plenty of fluid/water
during a workout, and stay fit by exercising intelligently.
Always follow training guidelines that are specific to
your own physical condition.
Stop exercising immediately if you feel nausea,
dizziness, sharp pain, or any other physical
discomfort. Failure to stop excercising can result in
injury or death to yourself.
WARNING
Always stretch after a workout session to reduce
the risk of personal injury. Failure to stretch
properly may result in injury to youerself.
CAUTION
Guidelines for Healthy Adults
The American College of Sports Medicine (ACSM) and
the American Heart Association (AHA) are continuously
updating guidelines and recommendations for physical
activity.
The current basic recommendations from ACSM and
AHA is:
Do moderately intense cardio 30 minutes a day, five
days a week.
OR
Do vigorously intense cardio 20 minutes a day, three
days a week.
AND
Do eight to ten strength-training exercises, eight to
twelve repetitions of each exercise twice a week.
Moderate-intensity physical activity means working
hard enough to raise your heart rate and break a
sweat, yet still being able to carry on a conversation.
It should be noted that to lose weight or maintain
weight loss, 60 to 90 minutes of physical activity may
be necessary. The 30 minute recommendation is
for the average healthy adult to maintain health and
reduce the risk for chronic disease.
To review the latest guidelines and recommendations,
visit the American College of Sports Medicine website:
www.acsm.org
Injuries to health may result from incorrect or
excessive training. Failure to stop excercising can
result in injury or death to yourself.
WARNING

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
SPECIFICATIONS
3
Weight . . . . . . . . . ISO1000 - 126 lbs. / 57 Kg. . . . . . . . . . . .ISO7000 - 164 lbs. / 74 Kg.
Max User Weight . . 350 lbs. / 159 Kg.
Power . . . . . . . . . . Self generating w/auto recharge battery back-up.
Optional Low Voltage AC adapter available.
Resistance System . ISO1000 - Electromagnetic Self Generating Resistance . . .ISO7000 - Bidirectional
Work Load. . . . . . . Speed dependent - CONSTANT WORK & ISO-STRENGTH programs
Speed Independent - MANUAL, HEART RATE, RANDOM & HILL PROFILES programs
Accuracy Class. . . . . Class A
Warranty . . . . . . . . Within U.S. & Canada 3 years parts, 1 year labor
Outside U.S. 3 years parts, no labor
24”
610 mm
53”
1346 mm
58”
1473 mm

SETUP & INSTALLATION
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
4
Placement of Cardiovascular Machine
Position the unit in a location that has a stable and
level sub-floor. Equipment should be positioned
in a location that is not in direct sunlight, in areas
of extreme temperature and humidity, or where
the equipment may be splashed with water or
fluids. This machine is intended for indoor use only.
Equipment should be positioned with a safety
perimeter of 40” or 1 meter around unit.
40” / 1 Meter
Safety Space
40” / 1 Meter
Safety Space
40” / 1 Meter
Safety Space
40” / 1 Meter
Safety Space
Level Cardiovascular Machine
If the sub-floor is unlevel, the unit is equipped with
leveling end caps. The end caps are designed with
the recess of end cap off centered. This allows you
to rotate the endcap(s) to a position that will level
the equipment. After adjustment, check and make
sure end caps are fully seated against base frame
tubes.
Offset Endcap
Endcap Endcap
Proper Supervision
Close supervision is required when the exercise
machine is being used by or near individuals with
disabilities. Keep unsupervised children outside the
safety perimeter.
Cleaning
Never clean the machine with organic solvents,
alcohol or bleach based cleaners. To promote a
healthy environment, wipe any sweat off of unit with
a commercially manufactured wipe designed for the
finess industry, or a damp cloth.
Failure to place the equipment on a stable and level
sub-floor with a safety perimeter can result in injury
to yourself and others.
WARNING
Endcap Endcap

PRODUCT OVERVIEW
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
5
Leveling Base
Endcaps
Water Bottle
Holder
Fit-Key™
Receptacle
Heart Rate
Contact Grips
Adjustable Display
& Control Console
Transport Wheels
Horizontal Seat
Adjustment
Vertical Seat
Adjustment
Oversized
Gel Seat
Foot Crank
Custom Molded
Hand Grips

KEYPAD FUNCTIONS
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
6
MANUAL - The Manual program allows
the user to set the intensity at any level.
This level will not change unless the user
manually increases or decreases the
intensity using the UP or DOWN arrow
keys.
HEART RATE - The Heart Rate pro-
gram enables the user to set a target
heart rate. Through real-time monitor-
ing of the user’s heart rate, the computer
maintains the user’s heart rate near this
established target rate by altering the in-
tensity. This program will work only with
the optional chest strap.
CONSTANT WORK - In the Constant
Work program, pedal resistance is
automatically adjusted to compensate for
any changes in pedal speed (RPM), thus
workload (watts) will remain constant at
any given setting. Therefore, at higher
RPM’s, the perceived load on the muscles
is reduced while maintaining a target
wattage.
ISO-STRENGTH - The ISO-Strength
program enables the user to set the target
RPM rate. The computer continuously
monitors the RPM, and increases the
resistance if the measured RPM exceeds
the target RPM.
RANDOM - The Random program
provides a different program each time.
The level of intensity throughout this
program varies in a random fashion.
HILL PROFILES - Select between six
different profiles of various intensity and
intervals. The six profiles are;
Course, Sprints, Twin Peaks, Peak, Pro-
gressive, Multi-Peak
SCAN - When Scan Key is pressed, the
display will return to the normal, scan
view of all the function values.
SELECT - The Select key locks the
display functions at their current settings.
When pressed again, Select will cause
the display to roll to its next mode and
lock it there.
START - The Start key provides a one-
touch “quickstart” in Manual mode, or af-
ter logging into a program, the start key
will activate the selected program.
PAUSE/CLEAR - The Pause/Clear key
will pause the timer any time during a
program. Pressing Pause/Clear when
in the paused mode will clear the pro-
gram. To restart a paused program,
press start.
ENTER - The Enter key is pressed to
enter selected values for the following
workout parameters. Program, Level
and Time.
- and + - When pressed before a
workout has begun, the plus and minus
keys are used for increasing the value of
the workout parameters. Time and Level
(the desired values can then be chosen
using the Enter key).
When pressed during a workout, these
keys may also be used to:
(1) Change the intensity level in the
Manual, Random and all Hill Profile
programs.
(2) Change the target heart rate in the
Heart Rate program.
(3) Change the target wattage in the
Workload Control (watts) program.
(4) Change the target RPM value in the
ISO-Strength (Isokinetic) program.
Work Level Status Screen - The Work
Level Status Screen gives a progressive
real-time indication of current work level
of any and all programs.
TIME - The Time readout displays the
user input of work level desired in a pro-
gram, also the amount of workout time
desired. During the running of a pro-
gram it displays the amount of minutes
that are left in the workout program.
Message Screen - The Message screen
displays instructions on how to start and
input program parameters. It also gives
feedback information particular to each
program i.e. Watts (indication of work),
Heart Rate amount, Level of intensity,
RPM turned, Calories burned, Distance
traveled. Red LED lights light up next to
the corresponding output.

BIOMECHANICAL POSITIONING
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
7
Body Positioning
Comfort is a key issue to obtain the most beneficial
exercise, and a upright body posture will result in a
broader range of muscle recruitment.
Seat Height
The seat height should be positiioned so that the legs
are not hyperextended, and have a slight bend in the
knee when at the bottom of the pedal stroke.
Fore-Aft Seat Position
The Fore-Aft position should be set so that your hips
are behind the pedal crank, and your body is in a
balanced state. You should be able to stay in balance
without gripping the handlebar. Moving the seat
forward or backwards will change the relationship of
the seat height, so readjustment of seat height may
be necessary.
Gripping the Handlebar
Position the seat so that your grip on the handlebar is
light and comfortable. The SCIFIT bike has a handlebar
that allows several gripping positions. Moving hand
positions during a workout will help reduce stress
points and upper body tension.
Important Note: When using this product for medical
or rehabilitation purpose, the program selection and
work load should be set by the attending therapist or
medical professional based on the specific needs of
the user.
Always follow medical professionals guidelines to
reduce the risk of personal injury. Failure to follow
their directions may result in injury to yourself.
CAUTION

ADJUSTMENTS
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
8
Seat Adjustment
The seat can be adjusted vertically and horizontally.
To adjust position pull yellow know of spring loaded
pin, move seat to desired location, release pin and
adjust seat until pin locks into place.
Horizontal
Adjustment Pin
Vertical
Adjustment Pin

ACCESSORIES
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
9
12V Power Pack
To provide continuous power to the display when
equipment is not in operation, plug in the 12V power
pack into the jack located on the lower left side of
pedal housing.

HEART RATE TRANSMITTER STRAP & CONTACT GRIPS
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
10
Uses of the Heart Rate Transmitter Strap
The optional wireless heart rate transmitter accessory
is a useful device if you desire continuous feedback on
your current heart rate during a workout. In addition,
the ISO1000 & ISO1007 include a Heart Rate Control
program which requires use of the strap.
The Heart Rate Control program enables the user to set-
up a target heart rate. Through real-time monitoring
of the user’s heart rate, the computer maintains the
user’s heart rate at or below this established target
rate by decreasing the workload if the user’s heart rate
exceeds the target.
Activating & Deactivating Transmitter
Heart Rate Transmitter Straps come in a variety of styles
and manufacturers. To properly activate, secure strap
to the chest and to deactivate follow the instructions
that come with the Transmitter Strap.
Calculating Target Heart Rate Zone
Your approximate Maximum Heart Rate (MHR)
is equal to 220 minus your age. The upper limit of
your target zone is equal to 0.85 times your MHR. The
lower limit of your target zone is equal to 0.60 times
your MHR.
For Example:
Your age is 40:
220 - 40 = 180
180 x .85 = 153 (max MHR)
180 x .65 = 108 (min MHR)
These values are based upon averages, always consult
your physician to establish the proper Heart Rate Zone
for your individual health condition.
Heart Rate monitoring systems may be inaccurate.
If you feel faint, stop exercising immediately. Over
exercising may result in serious injury or death.
WARNING
Always follow manufacturers instructions for proper
care and use. Failure to follow manufacturers
instructions may result in injury to yourself.
CAUTION
Heart Rate
Contact Grips
Use of the Heart Rate Contact Grips
For those models with contact heart rate grips, simply
grip the contact pads lightly. After a short delay the
pulse reading will appear on the display. If a heart rate
transmitter strap is worn, it will override the contact
pickup.
The contact grips are not designed for use with SCIFIT’s
Heart Rate Control program. This program requires a
steady, continuous telemetry signal which can not be
provided using contract heart rate grips.
While the contact grips provide a good barometer
for monitoring the users heart rate, they are not
recommended for medical where accuracy of
monitoring is vital.

PROGRAM INSTRUCTIONS
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
11
Heart Rate Program
The Heart Rate Transmitter Strap is required for this
program. Refer to Section 8, Heart Rate Transmitter
Strap for a complete instruction on using the strap.
Refer to section 8, to understand how to calculate
your Target Heart Rate.
• Put on Heart Rate Transmitter Strap
• Start Movingg Crank Arms
• Press HEART RATE program key.
• Adjust Target Heart Rate
Use the + (plus) or - (minus) keys to adjust Heart
Rate. The default value is 100.
• Adjust Workout Time
Adjust the workout time with the + (plus) or
- (minus) keys. The default time is 20 minutes.
• Press Start and Begin Exercising
HEART RATE
-+ 100 ENTER
-+20:00 ENTER
-
Programs
SCIFIT products have 200 levels of computer controlled
resistance, which ensures that users of all fitness levels
will be able to get a challenging but not overwhelming
workout. Because the resistance is adjustable in .1
increments, it is easy for the user to track progress.
SCIFIT products feature one of the highest resistance
capabilities available on any cardio equipment.
SCIFIT products are self generated and have an
extremely low starting resistance. One pedal movement
or crank revolution activates the console and the
screen will remain lit at the most minimal levels of
movement.
SCIFIT products have a battery back up which will
keep the screen lit for a short period after exercise or
if the user stops. This varies between 30 seconds and
1 minute and can change with the amount of use each
product gets.
If you prefer the computer to remain lit before and
after use, an optional wall pack can be plugged in to
accomplish this. This is common in medical settings
and with Fit-Key Programs.
MANUAL
RANDOM HILL PROFILE
OR
• Adjust Work Level
To set the Work Level, use the +(plus) or - (minus)
keys to increase or decrease the workout intensity.
The higher the number, the harder the workout. The
default Work Level is 1 for Random and Hill Profile.
+1:0 ENTER
-+20:00 ENTER
• Adjust Workout Time
Adjust the workout time with the +(plus) or
-(minus) keys. The default time is 20 minutes.
• Press Start and Begin Exercising
ENTER
The default Work Level for Manual
is 4.0

PROGRAM INSTRUCTIONS
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
12
ISO-Strength
ISO-Strength is a isokinetic program, meaning that
the unit will resist your movements in order to force
you to stay at a set speed. This type of strength
workout will not cause excessive soreness because it
is accommodating. The computer adjusts resistance
based upon the strength or weakness at a specific
point in the movement and reacts to fatigue.
• Start Moving Crank Arms
• Press ISO-Strength program key.
• Adjust Target RPM
Use the + (plus) or - (minus) keys to adjust RPM
until the desired RPM is displayed. The default value
is 50.
• Adjust Workout Time
Adjust the workout time with the + (plus) or - (mi-
nus) keys. The default time is 20 minutes.
• Press Start and Begin Exercising
ISO-STRENGTH
-+50 ENTER
-+20:00 ENTER
Constant Work
Constant Work is a unique program that allows a user
to set a target wattage output (or workload). The
computer will control the resistance so that the user
is always working at that target level, regardless of
speed. Resistance is lower at higher speeds and
higher at lower speeds.
• Start Moving Crank Arms
• Press Constant Work program key.
• Adjust Target Watts
Use the + (plus) or - (minus) keys to adjust Watts
until the desired wattage is displayed. The default
value is 50.
• Adjust Workout Time
Adjust the workout time with the + (plus) or - (mi-
nus) keys. The default time is 20 minutes.
• Press Start and Begin Exercising
CONSTANT WORK
-+50 ENTER
-+20:00 ENTER
Fit-Key™ System (Optional)
All SCIFIT equipment is equipped with the Fit-Key™
system, but it is not required to operate the unit.
Fit-Key™ is a program that records and stores work
out data on a key that can be then transferred to a
computer with a Fit-Key™ reader.

MAINTENANCE & SERVICE
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
13
Maintenance
The ISO1000 & ISO7000 are virtually maintenance
free. After training, always wipe down your SCIFIT
exercise product. Perspiration that continuously settles
on the frame, upholstery, casings, and control console
may eventually cause rust or damage. Damage
resulting from lack of maintenance is NOT covered
under warranty.
Clean the console, seat, hand grips and body with
a commercially manufactured wipe designed for the
fitness industry, or a damp cloth.
Special attention should be paid to rollers, pins, pivot
joints and bearings. Check for loose screws / nuts
/ bolts periodically. If defective components are
identified and require replacement, the equipment
should be put out of service until repaired.
UNITED STATES CUSTOMER SERVICE
For assistance in the service of SCIFIT products;
phone : [phone] or [phone]
fax : [phone]
e-mail: service@scifit.com
The Product Support department is staffed from 7:00
AM to 6:00 PM CST Monday through Friday. A voice
mail service is available 24 hours a day for recording
messages to request technical support and to order
replacement parts. Our mailing address is:
SCIFIT Systems Inc.
5151 S. 110th E. Ave.
Tulsa, OK 74146
USA
UK & EUROPEAN CUSTOMER SERVICE
phone : [phone]
fax: [phone]
e-mail: info@scifit.uk.com
SCIFIT LTD (UK)
Lexham House
Forest Road
Binfield
Berkshire, RG42 4HP
UK
Company Number: 5970624 (UK)
In order to maintain a safe level of operation,
equipment must be inspected on a routine basis for
damaged or worn parts. Failure to inspect equipment
may result in injury to yourself or others.
CAUTION

WARRANTY
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
14
SCIFIT Statement of Warranty
SCIFIT warranties new products against defective
workmanship and/or materials under normal and
proper use subject to the following limitations:
(a) SCIFIT’s obligation to the original purchaser shall
apply to:
Within the United States and Canada both
parts and the cost of labor required to replace or repair
a defective product for a period of one (1) year from
user purchase date as documented by warranty card
and if warranty card has not been returned by user
then date of shipment from the factory. Thereafter, for
a period of two (2) years, such obligation shall extend
only to the supply of replacement parts or products
with any labor cost associated with such replacement
or repair to be at Buyer’s expense.
Outside the United States and Canada replace
defective product for a period of three (3) years from
user purchase date as documented by warranty card
and if warranty card has not been returned by user
then date of shipment from the factory.
(b) SCIFIT’s obligation shall be limited to repairing
or replacing defective parts. No allowance shall be
granted for repairs made by Buyer without SCIFIT’s
prior written approval. The decision to replace or
repair shall be solely at SCIFIT’s discretion.
(c) SCIFIT’s warranty does not apply to parts requiring
replacement or repair due to abnormal wear and tear,
improper use, corrosion (perspiration), improper
maintenance, improper rated, grounded or dedicated
electrical circuits or improper storage, nor does it apply
where all or part of the product has been altered from
its original state.
(d) THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED,
ARISING BY LAW OR OTHERWISE INCLUDING
WARRANTY OR MERCHANTABILITY OR FITNESS
FOR PURPOSE, AND IS IN LIEU OF ALL OTHER
LIABILITIES OF SCIFIT INCLUDING DIRECT,
INDIRECT, SPECIAL AND CONSEQUENTIAL
DAMAGES OR PENALTIES EXPRESSED
OR IMPLIED WHETHER ARISING OUT OF
CONTRACT, NEGLIGENCE OR OTHER TORT.
(e) Certain wear items are excluded from warranty
coverage unless determined to be defective. These
items include, but not limited to:
Seat, Rubber Footpads, Pedal Straps if equipped,
Water Bottle Holder, Magazine Rack.
Freight and Shipping
SCIFIT is not responsible for the repair or replacement
of any unit or part damaged during transit or
installation. Fire, flood and acts of nature are NOT
covered under this warranty. The customer is
responsible for inspection of each unit and part for
shipping damage at the time of delivery or installation.
The customer is responsible for pursuing all freight
damage claims with the appropriate transit company.
If the customer signs an unqualified receipt
for freight-damaged goods, customer is solely
responsible for the cost of repair or replacement
for such freight damage.

5151 South 110th East Avenue
Tulsa, Oklahoma 74146
USA
Sales: 1-800-278-3933 • 1-918-359-2000
Customer Service: 1-800-745-1373
www.scifit.com
Record Your Model Number:______________
Record Your Serial Number:______________
Record Your Date of Purchase:______________
Class A Device:
This Device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This Class (A) digital apparatus complies with Canadian
ICES-003
Cet appareil numérique de la classe (Å) est conforme á la
norme NMB-003 du Canada
Conforms to: EN55022:1995 EN50081-1:1992
EN60335-1:94 EN60335-2-82:2000
DATE OF MFG.
2.5” X 1.25”
Part No. P3870
Rev.: A; 12/15/07