
YS-55A- high power, wide beam automatic strobe that also has manual adjustment
YS-25A - medium power, medium beam automatic strobe that also has manual
adjustment
YS-15A – medium power, medium beam automatic strobe
Digital lighting package - features
Can be used with any compact digital underwater camera system and with some D-SLR
systems
Complete package with strobe, arm, tray and fiber optic connector
Built in Automatic flash exposure
The DX-8000G does have a pre-flash and strobes should be set on “2”.
All three strobes use popular AA NiMH rechargeable batteries or alkaline batteries.
The YS-90A, YS-55A, YS-25A and YS-15A are all triggered by another flash (slave
mode) or by fiber optic cable. TheYS-90A and YS-55A is also triggered by a 5-pin sync
connector for use with housed D-SLR cameras.
Setting the YS-90A ,YS-55A and YS-25A strobes
Set strobe power switch to Auto 2 (2) for the DX-8000G (Auto2 is for cameras w/o pre-
flash cancellation.
Set power setting to “8”. That setting corresponds to the f8 setting on the camera.
Set Slave switch to on (YS-90A only no slave switch on YS-25A)
Setting the YS-15
Turn strobe power switch to 2 for the DX8000G.
Wide-angle conversion lens for DX-5000G/DX-8000G - description
A 0.6x magnification (17mm equivalent) wide-angle lens that focuses both topside and
underwater with a 150 degree picture angle topside for panoramic images and a 94
degree picture angle underwater for reef scenic images.