Seagate Lyve Mobile Array User manual

DO NOT PRINT THIS PAGE
DO NOT PRINT THIS PAGE
Lyve Mobile Rackmout Receiver QSG
100869101B_Lyve Mobile Rackmount Receiver_216mmX279mm_EN_QSG
Part Number: 100869101B
Folded Size: 215.9 mm W x 279.4 mm H (letter)
Trim size: 431.8 mm W x 279.4 mm H
Page count: 16
Binding: Saddle stitch
Colors: K

QUICK START GUIDE

2
Rackmount Kit Parts List
D10-32 cage nut (4x)
Back rails (2x)
CM4 nut (X4) IFlat washer (4x)
H10-32 pan head screw (4x
(#10-32xL25.4, phillips screw)
E10-32 flat head screw (8x)
(#10-32xL12.7, phillips screw)
FStepped washer (8x)
JLatch (2X)
KZip ties (2X)
Front rail left Front rail right
AM4 screw for 7.1 mm hole (4x)
(M4xL10 (6.8,2.5), phillips screw)
BM4 scew for 0.375” hole (4x)
(M4xL10 (9.1,2.5), phillips screw)
GM4 flat pan head screw (4x)
(M4xL8 phillips screw)

3
Lyve Mobile Rackmount Receiver
Receiver weight (empty): 47.52 lb/21.6 kg
Do not attempt to lift or assemble
Lyve Mobile Rackmount Receiver
with compatible devices inserted.
Removing Lyve Mobile Rackmount Receiver from its packaging
and carrying the unit must be performed by at least two people.
CAUTION
TWO-PERSON
LIFT REQUIRED
BACK
FRONT
Back rails (2x)
GM4 flat pan
head screw (4x)
Front rail left
Front rail right
D10-32 cage nut (4x)
IFlat washer (4x)
H 10-32 pan head
screw (4x)
BM4 Screw for
0.375” hole (4x)
AM4 Screw for
7.1 mm hole (4x)
FStepped washer (8x)
E10-32 flat head screw (8x)
CM4 nut (X4)

4
1
2
Rack Assembly
Attach M4 rack screws to the front rails
Your rack may have standard 7.1 mm or .375” openings. M4 screws are provided for both hole dimensions.
Insert an M4 screw for 7.1 mm or .375” in the indicated hole on the left front rail and fasten it with an M4 nut.
Repeat the process for the right front rail.
Attach M4 rack screws to the back rails
Insert M4 screws in the indicated holes on the back rails and fasten them with M4 nuts.
BACK
Back rails
A or B
M4 screw for
7.1 mm or
.375” hole
CM4 nut
FRONT
Front rail left
Front rail right
A or B
M4 screw for 7.1 m m
or .375” hole
CM4 nut

5
3
Attach cage nuts
Attach two 10-32 cage nuts to each front rack post. Leave 101.6 mm space between the two nuts
on each post.
FRONT
BACK
D10-32 cage nut
101.6 mm
496.685 mm
804.826 mm

6
4
Attach the front rails to the front of the rack
Position the left front rail on the cage nut on the left front rack post. Insert two 10-32 flat head screws
into two stepped washers. Use the screw/washer assemblies to fasten the left front rail to the left
front rack post.
Repeat the process for the right front rail and right front rack post.
FRONT
BACK
Front rail left
Front rail right
FStepped washer
E10-32 flat head screw

7
5
Attach the back rails to the back of the rack
Position the back rails at the correct height on the rear rack posts. Insert two 10-32 flat head screws into
two stepped washers. Use the screw/washer assemblies to fasten the back rails to the rear rack posts.
BACK
FStepped washer
E10-32 flat head screw

8
6
Attach the front rails to the back rails
Use M4 flat pan head screws to attach the front rails to the back rails.
FRONT
BACK
GM4 flat pan head screw

9
Install Lyve™Mobile Rackmount Receiver
7
Receiver weight (empty): 47.52 lb/21.6 kg
Do not attempt to lift or assemble Lyve Mobile Rackmount Receiver with compatible devices inserted.
Removing Lyve Mobile Rackmount Receiver from its packaging
and carrying the unit must be performed by at least two people.
CAUTION
TWO-PERSON
LIFT REQUIRED
Position the front face of Lyve Mobile Rackmount Receiver over the cage nuts attached to the left
and right front posts. Insert two 10-32 pan head screws into two flat washers. Use the screw/washer
assemblies to attach Lyve Mobile Rackmount Receiver to the top cage nuts attached to the left and
right front posts.
Insert two 10-32 screws into the two latches. Use the screw/latch assemblies to attach Lyve Mobile
Rackmount Receiver to the bottom cage nuts attached to the left and right front posts.
FRONT
H10-32 Pan head
screw
IFlat washer
JLatch
D10-32
cage nut
D10-32
cage nut