SEAS AV-230 User manual

AV-230 Amplifier
Table of content
1 x AV-230 Amplifier
1 x 18VDC powersupply
1 x 230VAC Power cable
1 x Audio connection cable
2 x speaker connectors
Datasheet
RoHS compliant product
Page 1/3

AV-230 Amplifier
Technical Specifications
Output power: Stereo: 2 x 30 W (peak), 2 x 15 W (rms), 4 Ohm
External power supply: +/- 18VDC, 0,83 A
Frequency response: 10 Hz - 50 kHz (+ 0/- 3dB)
Total harm. dist. (THD+N): 0.25%, 20Hz<f<20KHz. Pout<Pr/2
Power efficiency: 85 %
Channel separation: 85 dB
Idle power consumption: < 1 W
Input impedance: 10KOhm
Input Balanced Stereo
Dimensions 88 mm (W) x 68 mm (D) x 25 mm (H)
Net. Weight unit 0,128 Kg
Datasheet
RoHS compliant product
Page 2/3

Installation guide
AV-230 Amplifier
Warning !
This amplifier does not have a short cirquit protection.
To prevent potential damage to the amplifier, please do not connect 220VAC before connecting all cables.
Speaker cable:
Please make sure the speaker cable is pushed
all the way inside the 2pin phoenix plug,
similar to picture, before connecting the Plugg
into the amplifier.
This will prevent short circuit of amplifier
output, and potential damage to amplifier.
RoHS compliant product
Page 3/3