Seaside Casual AURA Fire Table User manual

Page 1
901 REV A
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [e-mail]
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
TOP
x 1
GLASS WIND GUARD
FIRE BOWL
50mm Hex Lag
5/8 taps®
CONTROL PANEL
x 1
Part Code: 4MMALLEN
Actual Size
4mm Allen Wrench
x 1
x 4
x 1
AURA Fire Table
901
Part Code: 316-1/4-10-50HL
x 1
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
(Recommended: Rubber Mallet; Power Drill)
Tools Required:
Actual Size
1/2” Pan Head Screw
x 4
BASE
x 1
x 4
Actual Size
Actual Size
Part Code: TAP-5/8

Page 2
901 REV A
2 ATTACH CONTROL PANEL
Attach Control Panel to inside of
Fire Table Panel. Use (4) 1/2” Pan
Head Screws.
Drop Top onto Base and Se-
cure using (4) 50mm Lags.
Plug holes with 5/8” taps®.
3 ATTACH TOP TO BASE
Make all necessary
propane tank con-
nections with sup-
plied Fire Compo-
nents. Fill supplied
Gems into Fire
Bowl. Finally, Install
glass wind guard.
Wind guard must be
used at all times.
4 MAKE CONNECTIONS AND COMPLETE ASSEMBLY