Seaside Communications DRC-400 User manual

e Seaside Communications Universal
Remote Control will control up to four
devices, including your Digital Cable Set-
Top Box and most TVs and VCRs, and
auxiliary components.
e DRC requires two fresh AA alkaline
batteries and easy programming to control
all functions of your Digital Cable Set-Top
Box, as well as all of the basic functions of
your other original remote controls.
For best results, please read and perform
all instructions listed here. Also, keep these
instructions for future reference.
Use the DRC mode keys (i.e.,AUX,VCR,
CABLE,or TV) to control a desired device.
When pressed, the selected mode key will
light,conrming your choice.Use the other
keys to perform desired actions (see the
following key chart).
NOTE: e selected mode will remain active
until you press another mode key.
Press AUX,VCR,CABLE,
or TV once to select a
home entertainment
component to control.
Press POWERonce to
turn on or ohe
selected home enter-
tainment component.
Press HELPonce to
display the help screen.
Press MUTEonce to
turn sound oor on.
Use PAGE (or
PAGE ) to page up
(or down) through
menu screens and the
program guide.
Use LOCK/PPV*to
restrict viewing of
selected programs or
to view the PPV menu.
Use EXITto exit menu
or guide.
Use INFOto display
current channel and
program information.
Use cursor keys to
move the cursor in the
program guide and
menu screens.
Use OK/SELECT*to
select menu options,
PPV events,and to
tune programs from
the programguide.
Use GUIDE to display
the program guide.
Use MENUto display
the main menu.
In TV or CABLE mode,
useVOLUME + (or
VOLUME
-
) to raise
(or lower) sound
volume.
Use CHANNEL + (or
CHANNEL
-
) to select
the next higher (or
lower) channel.
Use LAST to recall last
channel or go back one
screen in the menu.
In the CABLE mode,
press FAVORITEonce
to display preset
favorite cable channels.
ese functions are
set by your cable
system operator.
Use the keypad (0 ~ 9)
to directly select
channels (e.g., 09 or 31).
Press TV/VCR BYPASS
once to switchVCR to
view TV or tape (not
supported by all
applications).
Use ENTER/MUSIC to
display menu of digital
music channels, or to
enter channels on
some TV models.
In the VCR andTV
modes, use the STOP,
PAUSE, PLAY, REW.,
RECORD, and F.FWD.
keys to control VCR. To
record a program, press
RECORD once.
In the CABLE mode,
press DAY> (or <DAY)
once to move the pro
gram guide ahead (or
back) 24hours.
*NOTE: Functionality ohe LOCK/PPV
and SELECT /OK keys are dependent on the
soware and the model of converter.
1. On the DRC’s back, pull back the bat-
tery cover and remove it.
2. Obtain two (2) fully-charged AA
alkaline batteries. Match the +
and
-
marks on the batteries to the
+ and
-
marks in the battery case,
then insert the batteries.
3. Push the battery cover back
into place.
4. Test the unit by pressing POWER
and any mode key (e.g., AUX,VCR,
CABLE, or TV). Ihe batteries are
inserted correctly, the selected mode
key will be lit.
NOTE: Removing the batteries WILLNOT
require you to reprogram your DRC.A selected
mode key will blink two times with each key
press when batteries need replacing.
1. Turn on the TV.
2. On the DRC, press andhold TV (at
least 6 seconds) until you see the pro-
gramming mode start.Each mode
key light will turn oa nd on sequen-
tially,starting withAUX on through
TV, and the sequence will repeat
twice. At this time, release TV and
wait until it’s lit continuously.
3. Locate the code for your TV in Setup
Codes for TVs below. Brands are listed
in alphabetical order with the most
popular codes listed
4. -digit code for
your TV. If you perform this proce-
dure correctly, the TV light will blink
three times.
NOTE: If you enter an invalid code, the
TV light will turn o. In that case,
repeat steps 2 through 4 with a valid
code.
5. Aim the DRC at your TV andpress
POWERonce. e TV should turn
o. It does not respond, repeat
steps 2-4, trying each code listed for
your brand until you the one
that operates your TV. If your TV
still does not work with the DRC, try
searching for the code (see Searching
For Your Code on the back side).
6. Write your TVcode in the boxes
below for future reference.
NOTE: Remember, to use the DRC to operate
your TV, press TV rst.
A-Mark0003
AOC 0030, 0019, 0003, 0052, 0137,0185
Abex 0032
Admiral 0093
Adventura 0046
Aiko 0092
Akai 0030, 0098
Alaron 0179, 0183,0216
Ambassador 0177
Ampro 0751
Anam 0180, 0004,0009, 0068
Anam National 0055, 0161
Archer 0003
Astro Text0379
Audiovox 0451, 0180, 0003, 0092, 0623
Baysonic 0180
Belcor 0019
Bell &Howell 0154, 0016
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463, 0003
CCE 0217, 0329
CXC 0180
Candle 0030,0056, 0046, 0186
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0060, 0030,0056, 0039, 0046, 0092,
0186, 0280
Clairtone 0185
Concerto 0056
Contec 0180, 0157,0158, 0185
Craig 0180, 0161
Crosley 0054
Crown 0180, 0039
Curtis Mathes 0047, 0054, 0154, 0051, 0451,0093,
0060, 0030, 0145, 0056, 0016,0039,
0166, 0466
Daewoo 0451, 0019, 0039, 0091, 0092, 0623,
0624
Daytron 0019
Denon 0145
Dumont 0017, 0019
Dwin 0720, 0774
Dynatech 0049
Electroband 0000, 0185
Electrohome0381, 0389, 0409
Emerson 0154, 0236, 0463,0180, 0282, 0178,
0019, 0179, 0039, 0038, 0158,0177,
0181, 0182, 0183, 0185, 0270,0280,
0623, 0624
Envision 0030
Fisher 0154, 0159
Fujitsu 0179
Funai 0180, 0179, 0171
Futuretech 0180
GE 0047, 0051, 0451, 0093, 0282,0178,
0021, 0055, 0027, 0029, 0135,0174,
0251, 0279
Gibralter 0017, 0030,0019
GoldStar 0030, 0178, 0019, 0056, 0001, 0002,
0032, 0106, 0409
Gradiente 0053, 0056,0392
Grunpy 0180, 0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054, 0078
Harvard 0180, 0068
Hitachi 0145, 0056,0032, 0038, 0097,0151,
0279, 0409,0413
0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053,0036, 0069, 0160, 0169, 0182
Janeil 0046
KEC 0180
KMC 0106
KTV 0180, 0030, 0039, 0183, 0185,0217,
0280
Kamp 0216
Kawasho 0158, 0216, 0308
Kaypani 0052
Kenwood 0030, 0019
Kloss 0024, 0046,0078
LG 0056
LXI 0047, 0054, 0154, 0156, 0178,0148
Logik 0016
Luxman 0056
MEI 0185
MGA 0150,0030, 0178, 0019,0155
MTC 0060,0030, 0019, 0056,0049, 0091,
0185, 0216
Magnavox 0054, 0030, 0179, 0020,0024, 0028,
0036, 0096, 0186, 0187, 0230,0386
Majestic 0016, 0015
Marantz 0054, 0030
Matsushita 0250
Megatron 0178, 0145,0003
Memorex 0154, 0250,0150, 0178, 0056,0016,
0106
Midland 0047, 0017, 0051, 0039, 0032,0135
Minutz 0021
Mitsubishi 0093, 0150,0178, 0019, 0014,0098,
0155, 0331, 0358
Motorola 0093, 0055
Multitech 0180, 0049,0217
NAD 0156, 0178, 0166
NEC 0030, 0019, 0056, 0036, 0497
NTC 0092
Nikko 0030, 0178, 0092
Noblex 0430
Noshi 0018
Onwa 0180
Optimus 0154,0250, 0166
Optonica 0093, 0165
Orion 0236, 0463,0179
Panasonic 0051, 0250, 0055, 0162, 0226
Penney 0047, 0156, 0051,0060, 0030, 0178,
0021, 0019, 0018, 0056, 0039,0002,
0003, 0027, 0032, 0110, 0135
Philco 0054, 0463, 0030, 0145, 0019,0020,
0028, 0096
Philips 0054
Pilot 0030, 0019, 0039
Pioneer 0038, 0166
Portland 0019, 0039, 0092
Prism 0051
Proscan 0047
Proton 0178, 0003,0031, 0052, 0466
Pulsar 0017, 0019
Quasar 0051,0250, 0165, 0055, 0219
RCA 0047, 0051, 0093,0019, 0018, 0029,
0038, 0090, 0135, 0174, 0278
Radio Shack 0047, 0154, 0165, 0180, 0030,0178,
0019, 0056, 0039, 0032, 0409
Realistic 0154, 0165,0180, 0030, 0178,0019,
0056, 0039, 0032
Rhapsody 0183, 0185, 0216
Runco 0017, 0030, 0251, 0497, 0603
SSS 0180, 0019
Sampo 0030, 0039,0032, 0052, 0110
Samsung 0060,0030, 0178, 0019,0056, 0032,
0329, 0427, 0482
Samsux 0039
Sansei 0451
Sansui 0463
Sanyo 0154, 0146, 0159, 0484
Scimitsu 0019
Scotch 0178
Scott 0236, 0180, 0178,0019, 0179
Sears 0047, 0054, 0154, 0156, 0178, 0179,
0056, 0015, 0146, 0148, 0159,0168,
0171, 0281
Semivox 0180
Semp 0156
Sharp 0093, 0165, 0039, 0153,0157, 0281,
0386, 0491
Shogun 0019
Signature 0016
Simpson 0186, 0187
Sony 0000, 0011, 0080,0111
Soundesign 0180, 0178, 0179, 0186
Spectricon 0003, 0137
Squareview 0171
Starlite 0180
Supre-Macy 0046
Supreme 0000
Sylvania 0054, 0030, 0020, 0028, 0065, 0096,
0381
Symphonic 0171
TMK 0178, 0056, 0177
Tandy 0093
Tatung 0055, 0003,0049, 0396
Technics 0051, 0250
Technol Ace 0179
Technovox 0007
Techwood 0051, 0056,0003
Teknika 0054, 0180, 0150,0060, 0019, 0179,
0056, 0016, 0039, 0092, 0186,0312
Telefunken 0056
Tera 0031
Toshiba 0154, 0156,0060, 0036
Tosonic 0185
Totevision 0039
Trical 0157
Universal 0027
V
ector Research 0030
Victor 0053
Video Concepts 0098
Vidikron 0054, 0242
Vidtech 0178, 0019, 0036
Viking 0046, 0312
Wards 0054, 0165, 0030, 0178,0021, 0019,
0179, 0056, 0016, 0020, 0027,0028,
0029, 0080, 0096, 0111, 0174
White Westinghouse
0623, 0624
Yamaha 0030, 0019
Zenith 0017, 0016, 0092
Zonda 0003
1. Turn on your VCR and insert a video
cassette.
2.
3. Locate yourVCRbrand in the
SETUP CODES FOR VCRs below.
Brands are listed in alphabetical
order with the most popular codes
listed
-digit VCR code
for yourVCR. If you perform this
procedure correctly, the VCR light
will blink three times.
NOTE: If you enter an invalid code, the
VCR light will turn o.In that case,
repeat steps 2 through 4with avalid
code.
5. Aim the DRC at your TV and and
press POWER once.YourVCR should
turn o. If yourVCR remote control
does not have a POWER key, press
PLAY. It does not respond, repeat
steps 2-4, trying each code listed for
your brand until you the one
that operates your VCR. If your VCR
still does not work with the DRC, try
searching for the code (see Searching
For Your Code on the back side).
6. Write yourVCRcode in the boxes
below for future reference.
NOTE: Remember, to use the DRC to operate
your VCR, press VCR rst.
Action 0317
Admiral 0048
Adventura 0000
Aiko 0278
Aiwa 0037, 0000, 0307, 0468
Akai 0041, 0049, 0053, 0061,0106, 0156,
0242
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell &Howell 0104
Broksonic 0184, 0121, 0209, 0002, 0211,0295,
0361, 0479
CCE 0072, 0278
Calix 0037
Canon 0035, 0102, 0167
Capehart 0020
Carver 0081
Cineral 0278
Citizen 0037, 0278
Colt0072
Craig 0037, 0047, 0240, 0072, 0271
Curtis Mathes 0060, 0035, 0041, 0162
Cybernex 0240, 0051
Daewoo 0045, 0278,0017, 0020, 0087, 0561
Daytron 0020
Denon 0042
Dynatech 0000
Electrohome0037
Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000,0121, 0043, 0209,
0002, 0278, 0036, 0061, 0068,0088,
0208, 0211, 0212, 0294, 0295,0361,
0479, 0510, 0561
Fisher 0047, 0104, 0054, 0066
Fuji 0035, 0033
Funai 0000
GE 0060, 0035, 0048, 0240, 0065,0202
Garrard 0000
GoVideo 0232, 0279,0350, 0432, 0526
GoldStar 0037, 0038, 0018, 0471, 0480
Gradiente 0000, 0008, 0408
Grundig 0195
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081, 0038, 0075
Harwood 0072, 0068
Headquarter 0046
Hitachi 0000, 0042,0041, 0065, 0082,0105,
0166, 0292, 0396
JVC 0067,0041, 0008, 0206, 0207, 0384
Jensen 0041
KEC 0037, 0278
KLH 0072
Kenwood 0067, 0041, 0038, 0384
Kodak 0035, 0037
LXI 0037
Lloyd’s 0000, 0208
Logik 0072
MEI 0035
MGA 0240,0043, 0061
MGNTechnology 0240
MTC 0240,0000
Magnasonic 0278
Magnavox 0035, 0039, 0081, 0000,0149, 0103,
0110
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162, 0454
Memorex 0035, 0037,0048, 0039, 0047,0240,
0000, 0104, 0162, 0046, 0299,0307
Minolta 0042, 0105
Mitsubishi 0048, 0067, 0043, 0061, 0075, 0173,
0214, 0242,0443
Motorola 0035, 0048
Multitech 0000, 0072
NAD 0058
NEC 0104, 0067, 0041, 0038,0040, 0050,
0082
Nikko 0037
Nikon 0034, 0253
Noblex 0240
Olympus 0035, 0226
Optimus 0037,0048, 0104, 0162,0058, 0432,
0454
Optonica 0062
Orion 0184, 0002, 0295, 0479
Panasonic 0035, 0162, 0077, 0102, 0225,0226,
0227, 0246, 0378, 0454
Penney 0035, 0037, 0240,0042, 0038, 0040,
0054
Pentax 0042,0065,0105
Philco 0035, 0209, 0479
Philips 0035, 0081, 0062, 0110, 0403
Pilot 0037
Pioneer 0067, 0058, 0168
Portland 0020
Protronic 0240
Proscan 0060, 0202
Protec 0072
Pulsar 0039, 0051
Quarter 0046
Quartz 0046, 0155
Quasar 0035,0162, 0077, 0454
RCA 0060, 0035, 0048,0240, 0042, 0149,
0065, 0077, 0105, 0106, 0202,0277
Radio Shack 0000
Radix 0037
Randex 0037
Realistic 0035, 0037,0048, 0047, 0000,0104,
0062, 0046, 0066
Ricoh 0034, 0253
Runco 0039
STS 0042
Salora 0075
Samsung 0240, 0045, 0051,0053
Sanky 0048, 0039
Sansui 0000, 0067, 0041, 0082, 0271, 0479
Sanyo 0047, 0240, 0104, 0046
Scott 0184, 0045, 0121,0043, 0210, 0211,
0212
Sears 0035, 0037, 0047, 0000, 0042, 0104,
0046, 0054, 0057, 0066, 0105
Semp 0045
Sharp 0048, 0062
Shintom 0072
Shogun0240, 0051
Singer 0072
continuedon backside...
DRC-400
USER GUIDE
UNIVERSAL REMOTE CONTROL
OVERVIEW
FEATURES AND FUNCTIONS
INSTALLING BATTERIES
PROGRAMMING TV CONTROL
Setup Codes for TVs:
Setup Codes for VCRs:
PROGRAMMING VCR CONTROL
On the DRC, press and hold VCR (at
least 6 seconds) until you see the
programming mode start.Each of
the mode key lights will turn oand
on sequentially,starting with AUX
on through TV, and the sequence will
repeat twice. During this time, release
VCR and wait until it’s lit
continuously.

Sony 0035, 0032, 0000, 0033,0034, 0011,
0253
Sunpak 0253
Sylvania 0035, 0081, 0000, 0043,0103, 0110
Symphonic 0000
TMK 0240, 0036,0208
Tatung 0041
Teac 0000, 0041
Technics 0035,0162, 0246
Teknika 0035, 0037, 0000, 0052
0000
Toshiba 0045,0043, 0057, 0066, 0210, 0212,
0366
Totevision 0037, 0240
Unitech 0240
Vector 0045
Vector Research 0038, 0040
Video Concepts 0045, 0040, 0061, 0221
Videosonic0240
Wards 0060, 0035, 0048,0047, 0081, 0240,
0000, 0042, 0072, 0149,0062, 0212
White Westinghouse
0278
XR-1000 0035, 0000, 0072
Yamaha 0038
Zenith 0039,0000, 0033, 0034
Brocksonic 0002, 0479 (for TV use 0463)
Citizen 0278
Colt 0072
Curtis Mathes 0035 (for TV use 0051)
Daewoo 0278 (for TV use 0624)
Emerson 0002, 0278 (for TV use 624),
0479 (for TV use 0463)
Funai 0000
GE 0240, 0035 (for TV use 0051),
0048 (for TV use 0093),
0060 (for TV use 0047)
Goldstar 0037 (for TV use 0056)
Harley Davidson 0000
Hitachi 0000
Lloyds 0000
Magnasonic0278
Magnavox 0000, 0081 (for TV use 0054)
Magnin 0240
Memorex 0037
MGA 0240
Mitsubishi 0048 (for TV use 0093)
Orion 0002,0479 (for TV use 0463)
Panasonic 0035 (for TV use 0051)
Radio Shack 0037
RCA 0240,0035 (for TV use 0051),
0060 (for TV use 0047),
0048 (for TV use 0093)
Sansui 0000, 0240, 0479 (for TV use 0463)
Sanyo 0240
Sears 0000,0037 (for TV use 0056)
Sharp 0048 (for TV use 0093)
Sony 0000, 0032 (for TV use 0000)
Sylvania 0081 (for TV use 0054)
Symphonic 0000
0000
White Westinghouse
0278 (for TV use 0624)
Zenith 0000,0479
NOTE: Some TV/VCR Combo codes may require
a separate TV code to control volume.Check the
codes above and follow the instructions in the
“Programming TV Control”section (on the front
side) using the supplied TV
TV code listed for your TV/VCR Combo’s oper-
ating code, you will need to use the volume
control capabilities of your General Instrument
Cable Converter.
When you received your DRC remote con-
trol,it was already programmed to operate
your GI Cable Converter. However, if you
want to control a DBS receiver or a erent
Cable Converter, perform the following
instructions (otherwise skip to the next
topic):
1. Turn on the Cable Converter or DBS
Receiver.
2. On the DRC, press and hold CABLE
(at least 6 seconds) until you see the
programming mode start. Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release CABLE and wait until it’s lit
continuously.
3. Locate your Cable Converter or DBS
brand in theSETUP CODES FOR
CABLE CONVERTERsor SETUP
CODES FOR DBSsbelow. Brands are
listed in alphabetical order with the
most popular codes listed
-digit code for
your Cable Converter or DBS.If
you perform this procedure correct-
ly, the CABLE light will blink three
times.
NOTE: If you enter an invalid code,
the CABLElight w
steps 2 through 4 with a valid code.
5. Aim the DRC at your Cable Converter
or DBS Receiver and and press
POWER once.Your Cable Converter
or DBS
does not respond,repeat steps 2-4,
trying each code listed for your
brand until you the one that
operates your Cable Converter or
DBS Receiver. If your unit still does
not work with the DRC,try searching
forthe code (seeSearching For Your
Code).
6. Write down the Cable Converter or
DBS Receiver code in the boxes
below for future reference.
NOTE: Remember, to use your DRC to operate
your Cable Converter or DBS Receiver, press
CABLE
General Instrument
0000, 0001, 0002, 0003,0004, 0005,
0006, 0008
Tocom 0005, 0007
General Instrument
0100, 0101, 0102, 0103,0104, 0105,
0106, 0107
Primestar 0100,0101, 0102, 0103
To program the DRC to control an auxiliary
component (e.g., a second TV or VCR, a GI
DBS Receiver, or Digital Audio Tuner):
1. Turn on your auxiliary component
(and CR, insert a video cas-
sette).
2. On the DRC, press and hold AUX (at
least 6 seconds) until you see the
programming mode start. Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release AUX and wait until it’s lit
continuously.
3. Locate the brand in theSETUP
CODESlisted for your type of auxil-
iary unit (e.g., VCRs, TVs, Cable
Controllers, or DBS Receivers) or
audio service listed below. Brands
are listed in alphabetical order with
the most popular codes listed
4. Press AUX,VCR, CABLE, or TV once
to let the DRC know what type of
device you want to assign to the AUX
mode.
-digit code for
your auxiliary component. If you per-
form this procedure correctly, the
AUX light will blink three times.
NOTE: If you enter an invalid code, the
AUXlight w that case,
repeat steps 2 through 5 with a valid
code.
6. Aim the DRC at your auxiliary com-
ponent and press POWER once (or
CR
tape)uxiliary component
does not respond,repeat steps 2-6,
trying each code listed for your
brand until you the one that
operates your auxiliary component.
es not work with the DRC,
try searching for the code (see
Searching For Your Code).
7. Write down the auxiliary compo-
nent type and its code in the spaces
below for future reference.
TYPE: __________________
NOTE: Remember, to use the DRC to operate
your auxiliary component, pressAUX
General Instrument
0201, 0200
Scienti Atlanta 0202
If your TV,VCR,Cable Converter or
Auxiliary Component does not respond to
listed
for your brand, or if your brand is not
listed at all, try searching for your code.
For exa
for your TV, you still cannot get the DRC to
operate your TV, then:
1. Turn on your TV.
2. On the DRC, press and hold TV (at
least 6 seconds) until you see the
programming mode start. Each of
the mode key lights will tu d
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release TV and wait until it’s lit con-
tinuously.
3. Press the (UP) cursor key once to
start the search mode.
NOTE: In the search mode, the DRC will
send IR codes from its library to the
selected component, starting with the
en the com-
ponent responds to a subsequent key
command (e.g., POWER), the correct
device code will be found.
4. Press POWER ey will
light on and that an IR
code has been sent.
5. If your television does not tu
press the UP cursor key once again
to call up the next IR code and press
POWER once again.
6. If your television still does not turn
peat step 5 as many times as
needed until your TV tu
7. When your
working code has been found.Press
OK once to save the code and the TV
key will blink three times,co rming
the selection.
8. To search for the codes of your other
components, repeat steps 1 through
7, but substitute the appropriate
device key (i.e.,VCR, CABLE, or
AUX) for the component you are
searching for.
If you have set up the DRC using the
Searching For Your Codeprocedure, you
may need to out which four-digit code
is operating your equipment.
Perfo
have set up your nd out
which four-digit code is operating your
equipment.
For example, to out which code is
operating your TV:
1. Turn on your TV.
2. On the DRC, press and hold TV (at
least 6 seconds) until you see the
mode light sequence start. Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and will repeat twice.
During the sequence, release the TV
key and wait until it stays lit continu-
ally.
ey will blink
three times.
4. To view the code fo digit,
press and release 1.Count the num-
ber of TV key blinks (e.g., 3 blinks
= 3) and write down the number in
elow.
NOTE will not blink if
the code digit is a “0”.
TV
5. Repeat step 4 three more times for
each successive digit by pressing and
releasing 2, 3, and then 4. Finish
writing down the code in the boxes
above.
6. To check for the codes of your other
components, repeat steps 1 through
5, only substitute the appropriate
device key (i.e.,VCR, CABLE, or
AUX) for the component you are
checking.Write down the codes in
the boxes below.
___________________
Your new DRC is set to control volume of a
component through its associated mode
(i.e.,through thecablein the Cable mode,
through theTVin the TV mode,and
through theauxiliary devicein the Aux.
mode). If your TV is not remote control-
lable,or if you would like the volume to be
controlled by a erent component,you
can change the Volume Lock setting to con-
trol a volume through a non associated
mode (e.g.,through thecablein the TV
mode).
Changing the Volume Lock setting to the
Cable or TV mode will change the volume
control for all modes except Aux.,which
will continue to control its own volume. If
you change the Volume Lock setting to the
Aux.mode, all modes (i.e., Aux., Cable, and
TV) will be controlled by the Aux.mode.
NOTE me controls will not operate if
Volume Lock is set to VCR mode.
1. On the DRC, press and hold TV (at
least 6 seconds) until you see the
programming mode start.Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release TV and wait until it’s lit con-
tinuously.
2. Press and release VOLUME +.
light will blink three
times, indicating volume has been
locked to the TV mode.
4. Now, whenever you press
VOLUME +,VOLUME
-
, or MUTE
on the DRC,volume will be con-
trolled by your TV.
1. On the DRC, press and hold CABLE
(at least 6 seconds) until you see the
programming mode start.Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release CABLE and wait until it’s lit
continuously.
2. Press and release VOLUME +.
CABLE key light will blink three
times, indicating volume has been
locked to the CABLE mode.
4. Now, whenever you press
VOLUME +,VOLUME
-
, or MUTE
on the DRC,volume will be con-
trolled by your Cable Converter.
1. On the DRC, press and hold AUX (at
least 6 seconds) until you see the
programming mode start. Each of
the mode key lights will tu
on sequentially, starting with AUX
on through TV, and the sequence
will repeat twice.During this time,
release AUX and wait until it’s lit
continuously.
2. Press and release VOLUME +.
UX key light will blink three
times, indicating volume has been
locked to the AUX mode.
4. Now, whenever you press
VOLUME +,VOLUME
-
, or MUTE
on the DRC,volume will be con-
trolled by your Auxiliary Device.
1. On the DRC, press and hold a mode
key (at least 6 seconds) until you see
the programming mode start. Each
mode and on
sequentially, starting with AUX on
through TV, and the sequence will
repeat twice. During this time,release
the mode key and wait until it’s lit
continuously.
2. Press and release VOLUME
-
.
ey light will blink three
times, indicating volume has been
unlocked for the selected mode.
4. Now, whenever you press
VOLUME +,VOLUME
-
, or MUTE
on the DRC, the volume controls will
reset to their original device.
A mode key does not
blink or blinks 2 times
when you press a key.
Replace the batteries with
two (2) new AA alkaline
batteries.
A mode key blinks when
you press a key, but home
entertainment component
does not respond.
Make sure the DRC is
aimed at your home
entertainment component
and is not farther than
15 feet away.
DRC does not control
home entertainment com-
ponents or commands are
not working properly.
Try all listed codes for the
component brands being
set up. Make sure they
can be operated with an
infrared remote control.
TV/VCR combo does not
respond properly.
Use the VCR codes for
your brand. Some combo
units may require both a
TV code and a VCR code
for full operation.
No volume on a 2nd TV.
Follow instructions in
Changing Volume Lock.
CHANNEL+ ,
CHANNEL
-
, and LAST
do not work for your RCA
TV.
Due to RCA design (1983-
1987), only the original
remote control will oper-
ate these functions.
Changing channels does
not work properly.
If original remote control
required pressing ENTER
to change channels, press
ENTER on the DRC
channel number.
PROGRAMMING VCR CONTROL
Setup Codes for VCRs (continued):
Incase of malfunction, return remote
control to Seaside Communications for
replacement.
ADDITIONAL INFORMATION
Table of contents
Popular Remote Control manuals by other brands

ardistel
ardistel MOTIONSENSE+ instruction manual

FUTABA
FUTABA Magnum Sport FP-S148 instruction manual

Aircon Off
Aircon Off Smart Remote Pro Setup and instruction manual

Mitsubishi Electric
Mitsubishi Electric PAR-SW96U-E installation manual

Insignia
Insignia NS-SSTK2B user manual

Mitsubishi Electric
Mitsubishi Electric Lossnay manual