4E5
CAUTION: If the crank becomes too hard to turn while opening the canopy,
check to see if the rope has come off the pulley. If you continue to turn the
crank, the rope or crank handle could break.
Set-Up and Operation
Step 2: Insert the bottom
pole into the upper pole while
pressing the snap button on the
upper pole until the snap button
locks into position.
Step 4: TO CLOSE UMBRELLA -
The umbrella main pole must
be in the upright position, then
continue to crank counter-
clockwise or opposite direc-
tion to close umbrella. Use tie
straps to secure canopy.
Step 1: Attach the nial on the
umbrella top (if unattached)
by screwing the nial into the
threaded screw-in adapter. Twist
until secure, but do not over
tighten.
Step 3: TO OPEN UMBRELLA - Turn
crank handle clockwise until canopy is
fully open.
TO TILT UMBRELLA - Once umbrella
is open, to operate the EZ Tilt function,
continue to turn crank handle clockwise
with a bit more effort and it will begin to
automatically tilt.
TO UNDO TILT - Turn crank handle in
opposite direction or counterclockwise
and it will automatically come back to
original upright position.
CAUTION: Do not use sharp tools or equipment such as a knife or scissors
when removing the protective material, as it may damage the product.